Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Industrial

Cat® C13 Diesel Engine

  • Maximum Power
    520 hp
  • Maximum Torque
    1756 lb-ft @ 1400 rpm
  • Rated Speed
    1800-2100 rpm
  • Minimum Power
    385 hp
Power Rating
Maximum Power
520 hp
Maximum Torque
1756 lb-ft @ 1400 rpm
Rated Speed
1800-2100 rpm
Minimum Power
385 hp
Emission Standards
Emissions
U.S. EPA Tier 4 Final
General
Engine Configuration
In-Line 6, 4-Stroke-Cycle Diesel
Engine Configuration
In-Line 6
Bore
5.1 in
Stroke
6.2 in
Displacement
762.8 in³
Compression Ratio
17.0:1
Aspiration
Turbocharged-Aftercooled (TA)
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
DOC+DPF+SCR
Cooling System Capacity
18.7 L (19.8 qt)
Lube System
34 L (35.9 qt)
Engine Dimensions - Approximate
Length
50 in
Width
39 in
Height
45 in
Weight
2520 lb
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
Length
1203-1272 mm (47.2-50.1 in)
Width
933-996 mm (36.74-39.2 in)
Height
1132-1186 mm (44.6-46.7 in)
Weight
1143-1350 kg (2520-2976 lb)
Aftertreatment Dimensions
Length
42 in
Width
41 in
Height
26 in
Weight
571 lb
Cat Regeneration System Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)
Length
1053-1077 mm (41.5-42.4 in)
Width
779.8-1069 mm (30.7-42.1 in)
Height
451.3-654 mm (17.8-25.7 in)
Weight
248-259 kg (547-571 lb)
Diameter
330.2 mm (13 in)
Cat Regeneration System Aftertreatment Dimensions - Approximate
Width
779.8-1069 mm (30.7-42.1 in)
Height
451.3-654 mm (17.8-25.7 in)
Length
1053-1077 mm (41.5-42.4 in)
Diameter
330.2 mm (13 in)
Weight
248-259 kg (547-571 lb)
PETU Dimensions - Tier 4 Final Only
Length
33.6 in
Width
11.3 in
Height
21.7 in
Weight
42.8 lb
Volume Capacity
51.1 qt (US)
PETU Dimensions (Tier 4 Final, Stage IV Only)
Length
854 mm (33.6 in)
Width
287 mm (11.3 in)
Volume Capacity
48.4 L (51.1 qt)
Weight
19.42 kg (42.8 lb)
Height
551 mm (21.7 in)
PETU Dimensions - Tier 4 Final, Stage IV Only
Width
287 mm (11.3 in)
Weight
19.42 kg (42.8 lb)
Length
854 mm (33.6 in)
Volume Capacity
48.4 L (51.1 qt)
Height
551 mm (21.7 in)
Passive Regeneration System Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)
Length
974.8 mm (38.4 in)
Width
958.3 mm (37.7 in)
Height
547.2 mm (21.5 in)
Weight
140 kg (308.6 lb)
Passive Regeneration System Aftertreatment Dimensions - Approximate
Weight
140 kg (308.6 lb)
Length
974.8 mm (38.4 in)
Width
958.3 mm (37.7 in)
Height
547.2 mm (21.5 in)
  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
    • Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
  • Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
    • Integrated Electronic Control Unit (ECU)
    • Remote fan control
  • Cooling System
    • Vertical or RH thermostat outlet
    • Centrifugal water pump
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels and Flywheel Housing
    • SAE No. 1 flywheel housing
    • Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
  • Fuel System
    • MEUI injection
    • Primary fuel filter
    • Secondary fuel filters
    • Fuel transfer pump
    • Electronic fuel priming
  • Lube System
    • Open crankcase ventilation system
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Oil dipstick
    • Gear driven oil pump
    • Choice of front, rear or center sumps
    • Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
  • Power Take Off (PTO)
    • SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
  • General
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment
    • Cat Regeneration System
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • NOx Reduction System (NRS)
    • Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
    • Available in 12 volt or 24 volt systems
  • U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment
    • Cat Regeneration System
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • Aftertreatment Electronic Control Unit (ECU)
    • NOx Reduction System (NRS)
    • Pump Electronic Control Unit (PETU)
    • Selective Catalytic Reduction (SCR)
    • Available in 12V or 24V systems