New D9 Dozer for Sale

D9 Dozer

Engine Model

Cat® C18
Engine Power

452 hp
Bore

5.7 in³
Stroke

7.2 in

Engine - U.S. EPA Tier 2/3 Equivalent

Engine Model: Cat® C18
Engine Power: 452 hp
Bore: 5.7 in³
Stroke: 7.2 in
Displacement: 1106 in³
Engine Power: 487 hp
Engine Power: 479 hp
Emissions: U.S. EPA Tier 2 or Tier 3 equivalent
Note: All engine ratings apply at 1,750 rpm.
Note: No derating required up to 4267 m (14,000 ft) altitude.

Engine - U.S. EPA Tier 4 Final/EU Stage V

Engine Model: Cat® C18
Bore: 5.7 in³
Stroke: 7.2 in³
Displacement: 1106 in³
Engine Power: 477 hp
Engine Power: 468 hp
Engine Power: 440 hp
Emissions: U.S. EPA Tier 4 / EU Stage V
Note: All Engine ratings apply at 1,750 rpm.
Note: No derating required up to 2499 m (8,200 ft).

FLUID CAPACITIES

Fuel Tank: 254 gal (US)
DEF Tank: 9.5 gal (US)
Fuel Tank: 248 gal (US)
Cooling System: 21 gal (US)
Engine Crankcase: 10 gal (US)
Powertrain: 40 gal (US)
Final Drives: 4 gal (US)
Roller Frames: 12 gal (US)
Pivot Shaft Oil: 8 gal (US)
Hydraulic System Tank: 24 gal (US)
Note: *With oil filters.
Note 2: Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or
Note 3: All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
Note 4: Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.

Weights

Operating Weight: 110225 lb
Shipping Weight: 84373 lb
Note: D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
Note: D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.

Hydraulic Controls

Pump Type: Piston-type geared to flywheel
Pump Output: 96 gal/min
Fan Pump: 21 gal/min
Tilt Cylinder Flow: 53 gal/min
Tilt Cylinder Flow: 53 gal/min
Lift Cylinder Relief Valve Setting: 3800 lbf/in
Tilt Cylinder Relief Valve Setting: 2799 psi
Ripper: 3800 psi
Ripper: 3800 psi
Steering System: 5874 psi
Tank Capacity: 24 gal/min
Note: Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
Note: Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
Note: Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)

Undercarriage

Shoe Type: Extreme Service
Width: 24 in
Shoes: 43
Grouser Height: 3.3 in
Pitch: 9.4 in
Ground Clearance: 18.1 in
Track Gauge: 88.6 in
Length: 136.6 in
Ground Contact Area: 45.6 ft²
Track Rollers: 8
Number of Carrier Rollers: 1 per side (optional)

Steering and Brakes

Steering Type: Differential
Brake Type: Spring Applied Wet Disc
Brake Diameter: 15.5 in
Brake Count: 8

Air Conditioning System

Air Conditioning: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.

Standards

ROPS: Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
FOPS: Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
Sound: The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling
Sound: The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c
Sound: Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.

Transmission

1: 2.2 mile/h
2: 3.9 mile/h
3: 6.8 mile/h
1: 2.7 mile/h
2: 4.8 mile/h
3: 8.4 mile/h
Type: Planetary powershift

Blade - Semi-Universal

Blade Capacity: 17.8 yd³
Blade Width: 171.3 in
Blade Height: 76.1 in
Maximum Digging Depth: 23.9 in
Ground Clearance at Full Lift: 56 in
Maximum Tilt: 37 in
Blade Weight: 10587 lb
Total Operating Weight: 110205 lb
Note: * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

Blade - Universal

Blade Capacity: 21.7 yd³
Blade Width: 184.3 in
Blade Height: 76.1 in
Maximum Digging Depth: 23.9 in
Ground Clearance at Full Lift: 56 in
Maximum Tilt: 39.9 in
Blade Weight: 12016 lb
Total Operating Weight: 111362 lb
Note: *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

Ripper - Single Shank

Maximum penetration force: 35520 lbf
Maximum penetration depth: 48.5 in
Pryout Force: 74637 lbf
Maximum Clearance Raised: 34.7 in
Number of Pockets: 1
Weight: 10701 lb
Total Operating Weight: 110205 lb
Note: *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

Ripper - Single Shank, Deep Ripping

Maximum penetration force: 38667 lbf
Maximum penetration depth: 68 in
Pryout Force: 74412 lbf
Maximum Clearance Raised: 32.2 in
Number of Pockets: 1
Weight: 10981 lb
Total Operating Weight: 110485 lb
Note: *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

Ripper - Multi-Shank, Adjustable Parallelogram

Maximum Penetration Force: 34621 lbf
Maximum Penetration: 31.4 in
Pry: 81156 lbf
Maximum Clearance Raised: 34.6 in
Number of Pockets: 3
Weight: 12136 lb
Total Operating Weight: 111739 lb
Note: * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

Winches

Winch Model: PA 140VS
Weight: 3950 lb
Oil Capacity: 4 gal (US)
Drum Width: 12.6 in
Wire Cable Diameter: 1.13 in
Wire Cable Diameter: 1.25 ft
Maximum Drum Capacity: 257 in
Maximum Drum Capacity: 204 ft
Wire Cable Ferrule Size: 2.4 in
Wire Cable Ferrule Size: 2.8 in
Note: *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Note: Variable speed, hydraulically driven, dual braking system, three-roller fairlead.

Dimensions (Approximate)

Ground Clearance: 18.1 in
Track Gauge: 88.6 in
Width: 113 in
Width: 130.3 in
Height: 150.4 in
Height: 152.6 in
Height: 157.5 in
Drawbar Height: 30 in
Length: 136.6 in
Overall Length: 193.3 in
Length: 206.4 in
Length: 218.3 in
Length: 259.9 in
Length: 274.3 in
Length: 257 in
Length: 257.4 in
Overall Length: 323.6 in
Note: *Includes grouser height for total dimensions on hard surfaces.

Weights - Waste Handler

Note: 257.4

OPERATOR ENVIRONMENT
- ROPS/FOPS, Sound-Suppressed Cab
- High-Definition Primary Touchscreen Display
- Visibility – Rearview Mirrors
- Air Conditioner and Heater with Automatic Climate Control
- Seatbelt, 76 mm (3 in) Retractable with Switch
- Seat — Cloth with Air Suspension
- Window Wipers with Wash — Low, High, Intermittent
- Differential Steering — Power Turn
- Entertainment Radio Ready (12V Power, Harness, Speakers)
- Cab Glass — Single-Pane Tinted Safety
- Cab Door — Right-Hand Swing
- Access/Egress Lighting with Shutdown Timer
- "Operator Not Present" Detection
- Armrest — Adjustable
- Interior LED Courtesy Lights
- Interior Backlighting — Dimmable
- Air Conditioning Condenser — Cab Mounted (Standard only on Tier 4 engine arrangements. Optional on Tier 2/3 versions. Tier 2/3 versions have underhood A/C condenser standard.)
- Decelerator Pedal
- Controls — Blade — Electronic
- Controls — Ripper — Electronic
- Park Brake — Electronic
- Engine Speed Control Dial
- Cab Access — Blade Pusharm Steps and Grab Handle
- Fender Platform Guardrails
- Site Communication Radio Mount
- Four Fluids (Engine Oil, Coolant, Power Train, Fuel)
- Continuous Fluid Level Monitoring — Four Fluids (Engine Oil, Power Train, Coolant, Fuel)
- Slope and Side Slope Monitor
TECHNOLOGY
- VIMS^™
- Automated Blade Assist (ABA) — When Equipped with Dual Tilt
- Cat Product Link Elite (Cellular) (Where Allowed by Local Regulations)
POWER TRAIN
- Aftercooler, air-to-air
- Air filter, with precleaner
- Aluminum bar plate radiator, 6 fpi
- C18 Tier 4 Final and Stage IV: – 24-volt electric start – Clean Emissions Module
- Coolant, extended life
- Shift management: - Advanced Productivity Electronic Control System (APECS) - Enhanced AutoShift (EAS)
- Engine idle shutdown timer
- Ether starting aid, automatic
- Fast fuel system
- Fuel priming pump, key-on, electric
- High speed oil change system, engine and power train
- Muffler
- Parking brake, electronic
- Prescreener
- Separator, water/fuel
- Three planet, double-reduction planetary final drives
- Torque converter
- Transmission, electronic control (ECPC), (3F/3R speeds)
FLUIDS
- Coolant — Extended Life, Standard (— 37° C / — 25° F)
UNDERCARRIAGE
- Suspension-Type Undercarriage
- Track Guide
- Two-Piece Master Link
- Lifetime-Lubricated Rollers and Idlers
- Hydraulic Track Adjusters
- Equalizer Bar — Greased End Pin Bearings
HYDRAULICS
- Electronically Controlled, Load-Sensing Dozer Lift and Tilt
- Electronically Controlled, Load-Sensing Ripper Lift and Pitch
- Electronically Enabled Blade, Quick Drop
ELECTRICAL
- Alternator — 150-Amp
- Batteries — 2 x 4, 200-Amp Hour, 12V
- 12V, 15-Amp Converter
- Battery Isolation
- Backup Alarm
- Lights, Engine Compartment
- Lights — Halogen — 8 Positions
SERVICE AND MAINTENANCE
- Ecology Fluid Drains — All Compartments
- Hinged Bottom Guards
- High-Speed Oil Change — Engine and Transmission
- SOS℠ Fluid Sampling Ports
- Diagnostic Connector
- CapSureTM Hammerless Ripper Tip and Shank Protectors
- Anchorage Points (10)

OPERATOR ENVIRONMENT
- Visibility – Camera – Ripper Tip View
- Visibility — Dual Camera
- Visibility — Four Cameras — 360-Degree View
- Seat — Heated, Cooled, Adjustable Lumbar and Bolsters
- Entertainment Radio — AM/FM, Aux Input and Bluetooth^®
- Cab Glass — Dual-Pane Laminated Impact Safety
- Cab Glass — High-Pressure Safety (40 psi/275 kPa)
- Window Sunscreen
- Small Operator 5th Percentile Mounting Group
- Cab Door — Left-Hand Swing
- Cab Access — Powered Ladder
- Cab Filter Powered Precleaner
TECHNOLOGY
- AutoCarry^™
- Auto Ripper Control
- Cat Product Link Elite Dual Mode (Cellular + Satellite)
- Cat GRADE with 3D
POWER TRAIN
- Coolant, arctic
- Engine prelube
- Exhaust, wrapped: – Insolated Clean Emissions Module
- Final drives: – Cold weather – Guarded – Waste handling
- Ground level DEF fill
- Reversible cooling fan
FLUIDS
- Coolant — Extended Life, Arctic (— 51° C / — 60° F)
- High Ambient Lubrication Package
- Arctic Lubrication Package
UNDERCARRIAGE
- Undercarriage Arrangement — Abrasion
- Undercarriage Arrangement — Waste Handling
- Undercarriage Arrangement — Cold Weather
- Front Striker Bars
- Rubber Idler Guards
- Track Links — Heavy Duty XL — DuraLink
- Track Shoe — Anti-Packing Round Hole Carrier Roller
- Carrier Roller
- Carrier Roller — Cold Weather
HYDRAULICS
- Dozer Blade Dual Tilt
- Ripper Pin Puller
- Guarded Tilt Cylinder Lines
ELECTRICAL
- 24V Electric Start, Dual Starters
- Batteries — 4 x 200, 200-Amp Hour, 12V
- Lights — Halogen — 12 Positions
- Lights — LED — 14 Positions
- Lights — High-Output LED — 14 Positions
- Light — Warning Strobe
SERVICE AND MAINTENANCE
- Sound-Reduction Sealed Bottom Guards
- Ground-Level Fast Fuel Fill (Standard on Tier 4)
- Sound Enclosure
- Cat Autolube Grease System with Ground-Level Fill and Auto Shutoff
- Hinged Quick-Access Door on Radiator Guard
REAR ATTACHMENTS
- Ripper Ready
- Winch Ready
- Ripper — Single Shank
- Ripper — Single-Shank Deep
- Ripper — Multi Shank (three shank)
- Counterweight
- Striker Box (Waste)
- Winch
- Drawbar
BLADES
- Semi-Universal (13.6 m3/17.8 yd3)
- Semi-Universal Abrasion (13.6 m3/17.8 yd3)
- Universal (16.6 m3/21.7 yd3)
- Universal Abrasion (16.6 m3/21.7 yd3)
- Semi-Universal Push Plate (13.6 m3/17.8 yd3)
- SU Landfill (28.2 m3/36.8 yd3)
- Universal Landfill (38.8 m3/50.8 yd3)
- Woodchip (46.1 m3/60.3 yd3)
- Coal (36.8 m3/48.2 yd3)
  — Some blades only available through Cat Work Tools.
  — SU Abrasion and U Abrasion are available with black paint on back side.
OTHER
- Fire Suppression Ready
SPECIAL ARRANGEMENTS
- High Debris
- Stockpile
- Waste Handling
- Sound
- Arctic