Industrial
Cat?� C2.2 Diesel Engine
-
Minimum Power41.6 bhp
-
Maximum Power66 HP
-
Maximum Power66 hp
-
Maximum Power66.1 bhp
Power Rating
- Minimum Power
- 41.6 bhp
- Maximum Power
- 66 HP
- Maximum Power
- 66 hp
- Maximum Power
- 66.1 bhp
- Maximum Torque
- 153 lb-ft @ 1800 rpm
- Maximum Torque
- 153 lb-ft @ 1800 rpm
- Rated Speed
- 2200-3000 rpm
- Rated Speed
- 2200-3000 rpm
- Minimum Power
- 41.6 HP
- Minimum Power
- 41.6 hp
- Rated Speed
- 2200-3000 rpm
Emission Standards
- Emissions
- U.S. EPA Tier 4 Interim Equivalent
- Emissions
- U.S. EPA Tier 4 Interim Equivalent
- Emissions
- U.S. EPA Tier 4 Interim Equivalent
General
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Engine Configuration
- Inline 4, 4-Stroke-Cycle Diesel
- Bore
- 84 mm (3.3 in)
- Bore
- 84 mm (3.3 in)
- Bore
- 3.3 in
- Bore
- 3.3 in
- Stroke
- 3.9 in
- Stroke
- 3.9 in
- Stroke
- 100 mm (3.9 in)
- Stroke
- 100 mm (3.9 in)
- Displacement
- 135 in³
- Displacement
- 135 in³
- Displacement
- 2.216 L (135 in³)
- Aspiration
- Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
- Displacement
- 2.216 L (135 in³)
- Compression Ratio
- 23.3:1
- Compression Ratio
- 23.3:1
- Compression Ratio
- 23.3:1
- Aspiration
- Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
- Aspiration
- Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
- Combustion System
- Indirect Injection
- Combustion System
- Indirect Injection
- Combustion System
- Indirect Injection
- Rotation
- Counterclockwise
- Rotation from Flywheel End
- Counterclockwise
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- -
- Aftertreatment
- -
- Lube System
- 10.6 L (11.2 qt)
- Lube System
- 10.6 L (11.2 qt)
Engine Dimensions - Approximate
- Length
- 26 in
- Length
- 26 in
- Width
- 19.3 in
- Width
- 19.3 in
- Height
- 27.5 in
- Height
- 27.5 in
- Weight
- 427.7 lb
- Weight
- 427.7 lb
- Height
- 676-698 mm (26.6-27.5 in)
- Length
- 662 mm (26.0 in)
- Weight
- 184-194 kg (406-427.7 lb)
- Width
- 464-489 mm (18.3-19.3 in)
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
- Length
- 660-664 mm (26-26.14in)
- Width
- 459-531 mm (18.1-21 in)
- Height
- 725 mm (28.5 in)
- Weight
- 184-194 kg (406-427.7 lb)
-
Air Inlet System
- Inlet manifold with choice of inlets.
-
Control System
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
-
Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
-
Flywheels and Flywheel Housing
- SAE No. 7 1/2, SAE No. 8 or SAE No. 10 flywheel
- Choice of SAE No. 4 or standard backplate flywheel housing
-
Fuel System
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
-
Lube System
- Alternative oil fillers
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
-
General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request