Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Commercial Propulsion Engines

Cat C32 Propulsion Engine (IMO II)

  • Power Range
    660-1450 bhp (492-1081 bkW)
  • Power Range
    660-1450 bhp (492-1081 bkW)
  • Continuous Ratings
    1000.0 bhp
  • Heavy Duty Ratings
    1300.0 bhp
Power Rating
Power Range
660-1450 bhp (492-1081 bkW)
Power Range
660-1450 bhp (492-1081 bkW)
Continuous Ratings
1000.0 bhp
Heavy Duty Ratings
1300.0 bhp
Maximum Continuous Ratings
1450.0 bhp
Engine Specifications
Speed Range
1600-2300 rpm
Speed Range
1600-2300 rpm
Emissions
IMO II, EU IW
Emissions
IMO II, EU IW
Aspiration
TTA
Aspiration
TTA
Bore
5.71 in
Bore
5.71 in
Stroke
6.38 in
Stroke
6.38 in
Displacement
1959.0 in3
Displacement
1959 in³
Rotation from Flywheel End
Counterclockwise
Configuration
Vee 12, 4-Stroke-Cycle Diesel
Dimensions & Weights
Minimum Dry Weight
6950.0 lb
Minimum Dry Weight
6950 lb
Minimum Length
77.8 in
Minimum Length
77.8 in
Maximum Length
83.5 in
Minimum Height
60.9 in
Minimum Height
60.9 in
Maximum Height
62.5 in
Minimum Width
60.17 in
Minimum Width
60.17 in
Maximum Width
60.17 in
  • AIR INLET SYSTEM
    • Separate Circuit After-Cooled (SCAC
    • Air cleaner
    • Turbochargers, jacket water cooled
    • Turbochargers inlet, 152 mm (6 in) OD straight connection
  • CONTROL SYSTEM
    • Programmable Low Idle (550 - 750 rpm)
    • WOSR (Wide Operating Speed Range) available for - A, B, & C Ratings
    • Programmable High Idle Limit for WOSR Ratings
    • Electronic diagnostics and fault logging
    • Engine and transmission monitoring (speed, temperature, pressure)
    • Electronic fuel/air ratio control
    • Engine Protection Mode for extended ambient conditions
    • Torque Limiting functionality for WOSR ratings only
    • 70-pin customer connector
    • Throttle Input signal options
  • COOLING SYSTEM
    • Separate Circuit After-Cooling (SCAC) for Heat Exchanged (HEX) & Keel cooled engines
    • Jacket Water (JW) and SCAC Heat Exchangers Shell & Tube for HEX cooled engines
    • SCAC pump, gear driven
    • Jacket water pump, gear driven
    • Sea water pump, bronze impeller, gear driven, for HEX cooled engines only
    • Sea water Pump & JW Heat Exchanger Connection: 76.2 mm (3in) ID Standard
    • Keel Connections: 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange Connection
    • SCAC and JW shunt tanks for maintaining proper pump inlet pressures
  • EXHAUST SYSTEM
    • 4 Bolt 130 mm (5.12 in) diameter flanged outlet
    • Water-cooled exhaust manifold & turbocharger
  • FLYWHEELS & FLYWHEEL HOUSINGS
    • SAE standard rotation (CCW facing exciter end)
    • Flywheel Housing: SAE No. 0, Flywheel: 18 inch, 136 teeth
  • FUEL SYSTEM
    • Duplex Fuel Filters, Spin-on, RH & LH service
    • Fuel connections size:Supply JIC 37 Deg -10 (7/8-14), Return JIC 37 Deg -8 (3/4-16)
    • Plate Type Fuel Cooler installed behind Aftercooler Shunt Tank
    • Fuel transfer pump, gear driven
    • Manual fuel priming pump
    • Hybrid fuel line design
  • LUBE SYSTEM
    • Simplex Oil Filters, RH or LH service
    • Deep sump oil pan
    • RH or LH service oil filler locations
    • RH or LH service dipstick
    • Oil pump, gear driven
  • MOUNTING SYSTEM
    • Front support - adjustable
  • POWER TAKE-OFFS
    • Front Poly-V groove pulley (Quantity 1) for auxiliary drives
  • GENERAL
    • Common electrical bonding point
    • Engine does not ship with zinc components
  • Air Inlet Systems
    • Air Inlet Cleaner
    • Air Inlet Adapter
  • Charging Systems
    • Battery Charger
    • Charging Alternators
    • Ammeter
  • Cooling System
    • Marine Gear/Transmission Oil Coolers
    • Connections
  • Exhaust System
    • Dual Elbow
    • Flexible Fitting
    • Dual Muffler
    • Muffler Spark Arresting
    • Flange
  • Fuel System
    • Water Separator
  • Instrumentation
    • OEM Wiring Harness
    • Engine to Engine Harness
    • Instrument Panels
    • Exhaust Temperature Sensors
    • Wiring Harness
    • Gauges
    • Transmission Sensors
  • Lube System
    • Transmission Oil Cooler
    • Manual Sump Pump
    • Duplex Oil Filters
  • Protection System
    • Fuel and Oil Shielding
  • Starting System
    • Air Starting Motor
    • Air Start Accessories
    • Electric Starting Motors - Single 24 Volt
    • Starting Aids
    • Battery Sets - 24 Volt - Dry
    • Dual Starting Motors (Electric and Air)
  • Packing
    • Engine Protective Cover
    • Export Packing
    • Storage Preservation
  • Mounting System
    • Front Support
    • Adapter Kits
    • Isolator Mounts
  • Power Take-Offs
    • Front Enclosed Clutches
    • Rear Hydraulic Pump Drive
  • GENERAL
    • Fumes Disposal
  • CONTROL SYSTEM
    • Instrument Panels
    • CATERPILLAR ALARM AND PROTECTION
    • Fuel and Oil Shielding