New 3512C Tier 3 Marine Propulsion Engine for Sale

3512C Tier 3 Marine Propulsion Engine

Power Range

1340-2366 bhp (1000-1765 bkW)
Power Range

1340-2366 bhp (1000-1765 bkW)
Continuous Ratings

1810.0 bhp
Heavy Duty Ratings

2249.0 bhp

Power Rating

Power Range: 1340-2366 bhp (1000-1765 bkW)
Power Range: 1340-2366 bhp (1000-1765 bkW)
Continuous Ratings: 1810.0 bhp
Heavy Duty Ratings: 2249.0 bhp
Maximum Continuous Ratings: 2366.0 bhp

Engine Specifications

Speed Range: 1600-1800 rpm
Speed Range: 1600-1800 rpm
Emissions: EPA Tier 3, IMO II
Emissions: EPA Tier 3, IMO II
Aspiration: TTA
Aspiration: TTA
Bore: 6.69 in
Bore: 6.69 in
Stroke: 8.46 in
Stroke: 8.46 in
Displacement: 3574.0 in3
Displacement: 3574 in³
Rotation from Flywheel End: Counterclockwise or Clockwise
Configuration: Vee 12, 4-Stroke-Cycle Diesel

Dimensions & Weights

Minimum Dry Weight: 16508.0 lb
Minimum Dry Weight: 16508 lb
Minimum Length: 104.2 in
Minimum Length: 104.2 in
Maximum Length: 104.2 in
Minimum Height: 87.5 in
Minimum Height: 87.5 in
Maximum Height: 87.5 in
Minimum Width: 80.2 in
Minimum Width: 80.2 in
Maximum Width: 80.2 in

Air Inlet System
- Separate circuit aftercooler core, corrosion resistant coated (air side)
- Powercore air cleaner
Control System
- Dual Caterpillar A4 Electronic Engine Control with Electronic Unit Injector Fuel System
- Rigid Wiring Harness (10 amp DC power required to drive Electronic Engine Control Module)
Exhaust System
- 3500C engines:
Fuel System
- Fuel transfer pump
- Electronically Controlled Unit Injectors
Lube System
- Crankcase breather groups, Top mounted
- Oil filler and dipstick, LH or RH
- Oil pump, gear type
- 250 or 1000 hour sump oil pan
Mounting System
- 3500C engines:
Power Takeoffs
- Accessory drives: Lower RH, lower LH
- Front housing, two-sided
Protection System
- A4 Electronic Monitoring System provides customer programmable engine derating strategies to protect against adverse operating conditions
- Emergency stop push button (located in Electronic Instrument Panel)
- Safety shutoff protection:
General
- Vibration damper and guard
- Lifting eyes
- NOTE: Engines for heat exchanger cooling do NOT include heat exchange
Flywheel and Flywheel Housing
- Flywheel, SAE No. 00, 183 teeth
- Flywheel housing, SAE No. 00
Cooling System
- Oil cooler
- Thermostats and housing, Full open temperature 92 C (198 F)
- Jacket water pump, gear driven, centrifugal
- Auxiliary fresh water pump
- Aftercooler system: If using glycol, up to maximum 20% glycol concentration is allowed
Instrumentation
- Electronic service meter, instrument panel (24V), start/stop switch, emergency stop button, maintenance due light, diagnostic light, warning light, maintenance clear switch, start motor magnetic switch, 15 and 3A breakers
- Graphical Unit (Color Marine Power Display) for analog or digital of:

Air Inlet System
- Air Inlet Adapters
Charging System
- Battery Chargers
- Charging Alternator
Control System
- Throttle Control
Cooling System
- Coolant Shunt Tank
- Cooling System Options
Exhaust System
- Flexible Fittings
- Elbows
- Flanges
- Flange and Exhaust Expanders
- Mufflers
Fuel System
- Fuel Cooler Heat Exchanger - Sea Water
- Primary Fuel Filter
- Fuel Level Switch
- Rigid Fuel Lines
- Flexible Fuel Lines
Instrumentation
- Communication Modules
- Color Marine Power Display System
- Pilot House Instrument Panels
- Marine Gear Sensors
Lube System
- Sump Pumps
- Lubricating Oil
Power Take-Offs
- Stub Shafts
- Crankshaft Pulleys
- Damper Guard
- Flexible Coupling and Guards
Marine Society Requirements
- Green Passport Documentation
- Spray Shielding
Protection System
- Shutoff and Alarm Contactors
Special Appearance Packages
- Special Appearance Packages with Chrome Covers
- Yacht Class Finish
Starting System
- Air Starting Motor Options
- Battery Sets - 24 Volt - Dry
- Battery Rack
Mounting System
- Engine Supports
- Vibration Isolation Mountings
Paints
- Paint Color Options
Packing
- Shrink Wrap Protection
- Storage Preservation with Glycol Solution/Vapor Corrosion Inhibitor
- Export Boxing
- Export Packaging