New Cat C32 ACERT Generator Set (EPA Tier 3) for Sale

Cat C32 ACERT Generator Set (EPA Tier 3)

Minimum Rating

730 ekW (913 kVA)
Minimum Rating

730 ekW (913 kVA)
Maximum Rating

940 ekW (1175 kVA)
Maximum Rating

940 ekW (1175 kVA)

Generator Set Specifications

Minimum Rating: 730 ekW (913 kVA)
Minimum Rating: 730 ekW (913 kVA)
Maximum Rating: 940 ekW (1175 kVA)
Maximum Rating: 940 ekW (1175 kVA)
Frequency: 60hz
Frequency: 60hz
Speed: 1800 rpm
Speed: 1800 rpm
Emissions: EPA Tier III

Engine Specifications

Engine Model: Vee-12, 4-stroke-Cycle-Diesel
Aspiration: Turbocharged and aftercooled
Aspiration: Turbocharged and aftercooled
Bore: 5.7 in
Bore: 5.7 in
Stroke: 6.38 in
Stroke: 6.38 in
Displacement: 1959.0 in3
Displacement: 1959 in³
Governor Type: Electronic
Governor Type: Electronic
Fuel System: MEUI
Engine Model: Vee-12, 4-stroke-Cycle-Diesel

Generator Set Configurations

Emissions: EPA Tier III

Generator Set Dimensions

Width: 60.2 in
Width: 60.2 in
Height: 65.6 in
Height: 65.6 in
Weight: 15721.0 lb
Weight: 15721 lb
Length: 162.8 in/4271 mm (minimum), 175.3 in/4452 mm (maximum)

Generator Specifications

Excitation: Permanent magnet
Number of Poles: 4
Number of Bearings: 2 roller bearings
Number of Leads: 6
Insulation: Class H
IP Rating: 23
Voltage Regulator: CDVR

AIR INLET SYSTEM
- Separate circuit after-cooled (SCAC)
- Turbocharger, jacket water cooled
- Turbocharger inlet, 152 mm (6 in) OD straight connection
CONTROL SYSTEM
- If an EMCP panel or MGCP option is not chosen as optional equipment, then start/stop controls must be provided by the customer
- Electronic diagnostics and fault logging
- Engine Protection Mode for extended ambient conditions
- Electronic fuel/air ratio control
COOLING SYSTEM
- Separate Circuit After-Cooling (SCAC) for Heat Exchanged (HEX) & Keel cooled engines
- Jacket Water (JW) and SCAC Heat Exchangers Shell & Tube for HEX cooled engines
- SCAC pump, gear driven
- Jacket water pump, gear driven
- Sea water pump, bronze impeller, gear driven, for HEX cooled engines only
- Jacket water HEX with Sea water pump Connections: 76.2 mm (3in) ID Standard
- 4 Bolt ANSI Flange Connection
- Jacket water HEX without Sea water pump Connection: 2.5" hose barb connection (inlet), 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange (outlet)
- Keel Connections: 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange Connection
- SCAC and JW shunt tanks for maintaining proper Pump inlet pressures
EXHAUST SYSTEM
- Water-cooled exhaust manifold & turbocharger
- 4 Bolt 130 mm (5.12 in) diameter flanged outlet
FLYWHEELS & FLYWHEEL HOUSINGS
- Flywheel Housing, SAE No. 0
- Flywheel, 18 inch, 136 teeth
- SAE standard rotation
FUEL SYSTEM
- Duplex Fuel Filters, Spin-on, RH service
- Fuel connections size: Supply JIC 37 Deg -10 (7/8-14), Return JIC 37 Deg -8 (3/4-16)
- Plate-type fuel cooler installed behind Aftercooler Shunt Tank
- Fuel transfer pump, gear driven
- Manual fuel priming pump
GENERATORS AND GENERATOR ATTACHMENTS
- SR5 form wound
- 2 roller bearings
- Permanent magnet excitation
- 4 pole, 6 leads, Series Star connected
- Caterpillar's Digital Voltage Regulator (CDVR)
- Marine Class H insulation, Class F temperature rise
- Surface mounted platinum (PT100) 3-wire RTDs, 2 per phase on stator and one each on support bearings
- Anti-condensation space heaters (2 elements - 240 VAC, 1000 Watts
- IP23 Protection suitable for use with Fixed Water Based Local Application Fire Fighting Systems (FWBLAFFS)
- System IV insulation for harsh environment protection
LUBE SYSTEM
- Simplex oil filters, RH service
- Deep sump oil pan
- RH service oil filler locations
- RH service dipstick
- Oil pump, gear driven
MOUNTING SYSTEM
- Formed C-channel rails, 300mm (11.81in) height
- Six shipped loose combined helical spring/rubber
- isolators for installation below package base
GENERAL
- Front Damper guard
- Common electrical bondng point on HEX and KEEL cooled engines

ALARM AND PROTECTION
- Remote panels
- MCS Controller
- Power analyzer module
- Oil level, exhaust temperature, air starting pressure, heat exchanger pressure sensors
EXHAUST SYSTEM
- Dry Elbows
- Flexible Fitting
- Flange
- Muffler
- Muffler Spark Arresting
- Rain Cap
AIR INLET SYSTEM
- Air Inlet Cleaner
- Closed Crankcase Ventilation
- Air inlet adapter
CHARGING SYSTEM
- Battery Chargers, Charging Alternators
CONTROL SYSTEM
- Load Sharing Attachment
FUEL SYSTEM
- Water Separator
LUBE SYSTEM
- Duplex Oil Filters, Sump Pump
PROTECTION SYSTEM
- Fuel and Oil Shielding
STARTING SYSTEM
- Electric Starting Motors - Single 24 Volt
- Air Starting Motor
- Dual Starting Motors (Electric and Air)
- Air Start Accessories
- Starting Aids - JW Heaters
- Battery Sets - 24 Volt - Dry