Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Gas Compression Engines

G3412C Low Emissions Gas Compression Engine

  • Minimum Rating
    637.0 bhp
  • Maximum Rating
    637 BHP
  • Maximum Rating
    637.0 bhp
  • Emissions
    NSPS Site Compliant Capable
Engine Specifications
Minimum Rating
637.0 bhp
Maximum Rating
637 BHP
Maximum Rating
637.0 bhp
Emissions
NSPS Site Compliant Capable
Emissions
NSPS Site Compliant Capable
Displacement
1649 in³
Displacement
1649.0 in3
Minimum Rating
637 BHP
Compression Ratio
8.5:1
Compression Ratio
8.5:1
Aspiration
Turbocharged-Aftercooled
Aspiration
Turbocharged-Aftercooled
Rotation
Counterclockwise
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 0
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
136
Flywheel Teeth
136
Weight
4720 lb
Oil Change Interval
750 hours
Oil Change Interval
750 hours
Ignition
Cat EIS
Stroke
6.0 in
Stroke
6 in
Bore
5.4 in
Bore
5.4 in
Capacity for Liquids
Cooling System
14.5 gal
Cooling System
14.5 gal (US)
Lube Oil System
45.0 gal
Lube Oil System
45 gal (US)
  • Air Inlet System
    • Air cleaner — single element with service indicator
  • Control System
    • Electronic governor
    • Air/fuel ratio control on 1.0 g/bhp-hr NOx engines
  • Cooling System
    • Thermostats and housing
    • Jacket water pump
    • Aftercooler water pump
    • Aftercooler core
  • Exhaust System
    • Watercooled exhaust manifolds
    • Dry exhaust elbow
  • Flywheels & Flywheel Housings
    • SAE No. 0 flywheel
    • SAE No. 1 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Gas pressure regulator (1.5 to 5 psi gas supply required)
    • Natural gas carburetor
  • Ignition System
    • Cat Electronic Ignition System (EIS) with detonationsensitive timing
  • Instrumentation
    • Service meter
  • Lube System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter — RH
    • Oil pan — deep sump
    • Oil filler — RH in valve cover and RH dipstick
  • Mounting System
    • Engine supports
  • Protection System
    • Detonation sensitive timing control
    • Shutoff
  • General
    • Paint — Cat yellow
    • Crankshaft vibration damper and pulleys
    • Lifting eyes
  • Air Inlet System
    • Air cleaner — two-stage
    • Air inlet adapter
    • Precleaner
    • Air cleaner rain cap
  • Charging System
    • Battery chargers
    • Charging alternators
    • Ammeter gauge
    • Ammeter gauge and wiring
    • Control mounting
  • Cooling System
    • Radiators
    • Blower fan and fan drives for customer suppliedradiators
    • Expansion tank
    • Heat exchangers
  • Exhaust System
    • Flexible fittings
    • Elbows
    • Flanges
    • Rain caps
    • Mufflers
  • Fuel System
    • Dual gas regulator
    • Carburetor kits
    • Fuel filter
  • Ignition System
    • CSA ignition
    • Ignition ground wiring harness
    • Power supply
  • Instrumentation
    • Alarm module
    • Gauges and instrument panels
  • Mounting System
    • Vibration isolators
  • Power Take-Offs
    • Auxiliary drive pulleys
    • Enclosed clutch and clutch support
    • Front stub shaft
    • Flywheel stub shaft
    • Pulley removal
  • Protection System
    • Gas valves
    • Status control box interconnect wiring harness
  • Starting System
    • Air starting motor — electric air start control
    • Air pressure regulator
    • Air silencer
    • Electric starting motors — single 24-volt
    • Starting aids
    • Battery sets
  • General
    • Special paint