Gas Compression Engines
CG137-8 Gas Compression Engine
-
Minimum Rating400.0 bhp
-
Maximum Rating400 BHP
-
Maximum Rating400.0 bhp
-
EmissionsNSPS Site Compliant Capable
Engine Specifications
- Minimum Rating
- 400.0 bhp
- Maximum Rating
- 400 BHP
- Maximum Rating
- 400.0 bhp
- Emissions
- NSPS Site Compliant Capable
- Emissions
- NSPS Site Compliant Capable
- Displacement
- 1099 in³
- Displacement
- 1099.0 in3
- Minimum Rating
- 400 BHP
- Compression Ratio
- 10.25:1
- Compression Ratio
- 10.25:1
- Aspiration
- Turbocharged-Aftercooled
- Aspiration
- Turbocharged-Aftercooled
- Rotation
- Counterclockwise
- Rotation from Flywheel End
- Counterclockwise
- Flywheel and Flywheel Housing
- SAE No. 0
- Flywheel and Flywheel Housing
- SAE No. 0
- Flywheel Teeth
- 136
- Flywheel Teeth
- 136
- Weight
- 6250 lb
- Oil Change Interval
- 750 hours
- Oil Change Interval
- 750 hours
- Ignition
- Electronic ADEM A4
- Air
- Electronic ADEM A4
- Stroke
- 6.0 in
- Stroke
- 6 in
- Bore
- 5.4 in
- Bore
- 5.4 in
Capacity for Liquids
- Cooling System
- 14.5 gal
- Cooling System
- 14.5 gal (US)
- Lube Oil System
- 39.0 gal
- Lube Oil System
- 39 gal (US)
-
Air Inlet System
- Air cleaner — single element with service indicator
- Optional air inlet adapter and rain cap — recommended for weather protection
-
Control System
- ADEM A4
- Class 1, Division 2, Group C & D and Zone 2
-
Cooling System
- Jacket water thermostats and housing — full open temperature 98°C (208°F)
- Jacket water pump — gear driven, centrifugal, non-self-priming
- Aftercooler water pump — gear driven, centrifugal, non-self-priming
- Aftercooler core — for treated water and sea air atmosphere
-
Exhaust System
- Exhaust manifolds — watercooled
- Exhaust elbow — dry 203 mm (8 in)
-
Flywheels & Flywheel Housings
- Flywheel, SAE No. 14 or 18
- Flywheel housing, SAE No. 0
- SAE standard rotation
-
Fuel System
- Gas pressure regulator
- Natural gas carburetor
-
Lube System
- Crankcase breather — top mounted
- Oil cooler
- Oil filter — RH
- Oil filler in valve cover, dipstick — RH
-
Protection System
- ADEM A4 protection
- The following include alarm and shutdown:
- The following is display only
-
General
- Paint, Caterpillar yellow
- Crankshaft vibration damper and drive pulleys
- Lifting eyes
- Cylinder block inspection covers
-
Charging Alternator
- 24V, 60A CSA alternator
-
Exhaust System
- Exhaust flex fitting
- Exhaust elbow
- Exhaust flange — ANSI
-
Instrumentation
- Operator interface panel
- Operator interface panel enclosure
- 15', 20', 50' interconnect harness
-
Starting System
- Air pressure regulator
- Air start silencer
- Vane starter
- Electric starter
- Turbine starter
-
Fuel System
- Fuel filter
-
Air Inlet System
- Precleaner
- Rain cap
Buckets - Loader: 2.9m³ (3.75yd³) Material Handling Bucket for Wheel Loaders 
Buckets - Loader: 17.2 m³ (22.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14.5 m³ (19 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14.5 m³ (19 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14 m³ (18.25 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 11.9 m³ (15.5 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 11.9 m³ (15.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14 m³ (18.25 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Fusion™ Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 4.2 m3 (5.5 yd3) Fusion™ Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 4.2 m3 (5.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge