Gas Compression Engines
G3408C Low Emissions Gas Compression Engine
-
Minimum Rating425.0 bhp
-
Maximum Rating425 BHP
-
Maximum Rating425.0 bhp
-
EmissionsNSPS Site Compliant Capable or Non-regulated
Engine Specifications
- Minimum Rating
- 425.0 bhp
- Maximum Rating
- 425 BHP
- Maximum Rating
- 425.0 bhp
- Emissions
- NSPS Site Compliant Capable or Non-regulated
- Emissions
- NSPS Site Compliant Capable or Non-regulated
- Displacement
- 1099 in³
- Displacement
- 1099.0 in3
- Minimum Rating
- 425 BHP
- Compression Ratio
- 8.5:1
- Compression Ratio
- 8.5:1
- Aspiration
- Turbocharged-Aftercooled
- Aspiration
- Turbocharged-Aftercooled
- Rotation
- Counterclockwise
- Rotation from Flywheel End
- Counterclockwise
- Flywheel and Flywheel Housing
- SAE No. 0
- Flywheel and Flywheel Housing
- SAE No. 0
- Flywheel Teeth
- 136
- Flywheel Teeth
- 136
- Weight
- 4950 lb
- Oil Change Interval
- 750 hours
- Oil Change Interval
- 750 hours
- Ignition
- Cat EIS
- Stroke
- 6.0 in
- Stroke
- 6 in
- Bore
- 5.4 in
- Bore
- 5.4 in
Capacity for Liquids
- Cooling System
- 14.5 gal
- Cooling System
- 14.5 gal (US)
- Lube Oil System
- 39.0 gal
- Lube Oil System
- 39 gal (US)
-
Air Inlet System
- Air cleaner — single element with service indicator
-
Control System
- Electronic governor
- Air/fuel ratio control
-
Cooling System
- Thermostats and housing
- Jacket water pump
- Aftercooler water pump
- Aftercooler core
-
Exhaust System
- Watercooled exhaust manifolds
- Dry exhaust elbow
-
Flywheel & Flywheel Housing
- SAE No. 0 flywheel
- SAE No. 0 flywheel housing
- SAE standard rotation
-
Fuel System
- Gas pressure regulator (1.5 to 5 psi gas supply required)
- Natural gas carburetor
-
Ignition System
- Cat Electronic Ignition System (EIS) with detonation sensitive timing
-
Instrumentation
- Service meter
-
Lube System
- Crankcase breather — top mounted
- Oil cooler
- Oil filter — RH
- Oil pan — deep sump
- Oil filler — RH in valve cover and RH dipstick
-
Mounting System
- Engine supports
-
Protection System
- Detonation sensitive timing control
- Shutoff
-
General
- Paint — Cat yellow
- Crankshaft vibration damper and pulleys
- Lifting eyes
- Cylinder block inspection covers
-
Air Inlet System
- Air cleaner — two-stage
- Air inlet adapter
- Precleaner
- Air cleaner rain cap
-
Charging System
- Battery chargers
- Charging alternators
- Ammeter gauge
- Ammeter gauge and wiring
- Control mounting
-
Cooling System
- Radiators
- Blower fan and fan drives for customer suppliedradiators
- Expansion tank
- Heat exchangers
-
Exhaust System
- Flexible fittings
- Elbows
- Flanges
- Rain caps
- Mufflers
- Exhaust manifold — instrument holes at each port
-
Fuel System
- Dual gas regulator
- Carburetor kits
- Fuel filter
-
Ignition System
- CSA ignition
- Ignition ground wiring harness
- Power supply
-
Instrumentation
- Alarm module
- Gauges and instrument panels
-
Mounting System
- Vibration isolators
-
Power Take-offs
- Auxiliary drive pulleys
- Enclosed clutch and clutch support
- Front stub shaft
- Flywheel stub shaft
- Pulley removal
-
Protection System
- Gas valves
- Status control box interconnect wiring harness
-
Starting System
- Air starting motor
- Air pressure regulator
- Air silencer
- Electric start control
- Electric starting motors — single 24V
- Starting aids
- Battery sets — (24V dry), cables, and rack
-
General
- Special paint