New R3000H Underground Mining Loader for Sale

R3000H Underground Mining Loader

Engine Model

Cat® C15 ACERT™
Engine Model

Cat® C15
Rated Power

1800.0 rpm
Engine Power

401 hp

Engine

Engine Model: Cat® C15 ACERT™
Engine Model: Cat® C15
Rated Power: 1800.0 rpm
Engine Power: 401 hp
Gross Power: 409.0 hp
Engine Power: 401 hp
Bore: 5.4 in
Stroke: 6.8 in
Displacement: 927.6 in³
Bore: 5.4 in
Note: Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Stroke: 6.8 in
Displacement: 927.6 in3
Note: All rating conditions are based on ISO/TR 14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifi
Note: No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines.
Note: Optional Ventilation Reduction package available.
Note: Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.
Gross Power: 398 HP
Rated Power: 1800 r/min
Gross Power: 401 HP
Gross Power: 409 HP
Gross Power: 409 HP
Gross Power: 409 HP
Gross Power: 398 HP

Operating Specifications

Nominal Payload Capacity: 44092 lb
Nominal Payload Capacity: 44092.0 lb
Gross Machine Mass: 180779 lb
Static Tipping Load: 104199 lb
Static Tipping Full Turn Ahead Lift Arms Horizontal: 88191 lb
Breakout Force: 61773 lb
Gross Machine Mass: 177273.0 lb

Weights

Empty: 123580.0 lb
Empty: 128448 lb
Operating Mass: 128448 lb
Operating Mass: 54558 lb
Operating Mass: 73853 lb
Operating Mass: 172540 lb
Operating Mass: 125187 lb
Operating Mass: 47316 lb
Loaded: 167672.0 lb
Loaded: 172540 lb
Note: *Calculated weight.
Empty: 52104.0 lb
Empty: 71475 lb
Loaded: 122733.0 lb
Loaded: 44938 lb
Empty: 54558 lb
Empty: 73853 lb
Loaded: 125187 lb
Loaded: 47316 lb

Transmission

Forward 1: 3.4 mph
Forward: 3 mile/h
Forward 2: 6.0 mph
Forward: 5.7 mile/h
Forward 3: 10.7 mph
Forward: 10.2 mile/h
Forward 4: 19.6 mph
Forward: 17.5 mile/h
Reverse 1: 4.1 mph
Reverse: 4.1 mile/h
Reverse 2: 7.6 mph
Reverse: 7.1 mile/h
Reverse: 12.7 mile/h
Reverse: 19.4 mile/h

Hydraulic Cycle Times

Raise: 8.8 s
Dump: 1.85 s
Lower: 3.54 s
Total Cycle Time: 14.2 s

Bucket Capacities

Bucket Capacities: 8.9-11.6 m³ (11.6-15.2 yd³)
Dump Bucket: 11.6 yd³
Dump Bucket: 12.4 yd³
Dump Bucket: 13.7 yd³
Light Material Bucket: 15.2 yd³
Dump Bucket: 10.9 yd3
Dump Bucket: 11.6 yd3
Dump Bucket: 13.7 yd3
Note: *High penetration bucket versions also available.
Dump Bucket: 15.2 yd³
Dump Bucket: 10.9 yd³
Dump Bucket: 11.6 yd³
Dump Bucket: 13.7 yd³
Note: *High penetration bucket versions also available.

Turning Dimensions

Outside Clearance Radius: 296.7 in
Inner Clearance Radius: 127.8 in
Axle Oscillation: 8 °
Articulation Angle: 42.5 °
Note: **Clearance dimensions are for reference only.
Axle Oscillation: 8.0 Degrees
Articulation Angle: 42.5 Degrees
Note: **Clearance dimensions are for reference only.

Tires

Tire Size: 35/65 R33 VSNT
Tire Size: 35/65 R33

Service Refill Capacities

Engine Crankcase: 9 gal (US)
Transmission: 16.4 gal (US)
Hydraulic Tank: 37 gal (US)
Cooling System: 19.8 gal (US)
Front Differential and Final Drives: 31.4 gal (US)
Front Differential and Final Drives: 42 gal (US)
Rear Differential and Final Drives: 44.1 gal (US)
Fuel Tank: 406.5 gal (US)
Engine Crankcase: 9.0 gal
Cooling System: 19.8 gal
Front Differential and Final Drives: 31.4 gal
Fuel Tank: 406.5 gal
Hydraulic Tank: 37.0 gal
Rear Differential and Final Drives: 33.5 gal
Transmission: 16.4 gal
Rear Differential and Final Drives: 33.5 gal (US)

Standards

Brakes: ISO 3450-2011, CAN-CSA 424.30-M90
Standards: Rollover Protective Structure (ROPS)/Falling Object Protective Structure (FOPS) Certified Cab
Cab: ISO 3449-2005 Level II
Cab: ISO 3471-2008
Steering: ISO 5010-2007

TIRES, RIMS, AND WHEELS
- Tires Arrangements: Tires Must Be Selected From the Mandatory Attachments Section, Choose Between:
  – Tire, 35/65 R33, VSNT, Bridgestone
  – Tire, 35/65 R33, VSDL, Bridgestone
- Rims (set of four):
  – Five Piece, Tubeless
ELECTRICAL
- Alarm, Reversing
- Alternator, 95 Amp
- Battery Disconnect Switch, Ground Level
- Batteries, Low Maintenance
- Diagnostic Connector
- Engine Shutdown Switch
- Lighting:
  – External, Front, Rear, Halogen
  – Stop, Dual, Halogen
- Receptacle Group, Auxiliary Start
- Starter, Electric, 24-Volt
- Starting and Charging System
OPERATOR ENVIRONMENT
- Automatic Brake Application (ABA)
- Cab Enclosed:
  – ROPS/FOPS Certified
  – Air Conditioning
  – Cab Pressurizer and Filter
  – Dome Light
  – Heater
  – Radio Ready Compartment for Radio and Speakers
  – Salt Resistant Air Conditioner
- Caterpillar Electronic Monitoring System (CEMS), (dash instrumental panels)
- Horns, Electric
- Instrumentation/Gauges:
  – Speedometer/Tachometer
  – Fuel Level
  – Hydraulic Oil Temperature
  – Engine Coolant Temperature
- Operator Presence System
- Light, Warning, Residual Brake
- Low Hydraulic Level Warning
- Pilot Hydraulic Implement Controls (single joystick)
- Seat:
  – Seat, Suspension, Vinyl
- Seat Belt, Retractable
POWER TRAIN
- Brakes, Full Hydraulic Enclosed Wet Multiple-Disc Spring Applied, Fluid Released (SAFR^™)
- Engine:
  – Cat C15 6 Cylinder Diesel
  – Air-To-Air Aftercooler (ATAAC)
- Exhaust:
  – Particulate Filter, Flow Thru
  – Particulate Filter, Wall Flow
- Filter, Engine, Remote Mounted
- Fuel Adapters:
  – Standard Fill, Dual, Rubber Coated, Double Steel Braided Fuel Lines
- Fuel Priming Aid
- Park Brake Switch Engagement, Choose Between:
  – Push to Apply
  – Pull to Apply
- Precleaner, Engine Air Intake
- Torque Converter with Automatic Lock-Up Clutch
- Transmission, Automatic Planetary Powershift (4F/4R)
- Transmission Neutralizer
OTHER STANDARD EQUIPMENT
- Windows:
  – Single Pane
- Brake Axle Cooling
- Brake Light
- Cap, Radiator, Manual Release
- Catalytic Exhaust Purifier/Muffler
- Dump Bucket (8.9 m3/11.6 yd3)
- Bucket Lip:
  – Modular Weld-On
  – Lip Weldings – Full Weld Edge or Tack Weld Edge and Corners
- Decals, International Picto Graphics
- Fenders, Front, Rear
- Firewall
- Fuel Systems:
  – Dual Fuel Tanks
  – Fuel System Manual Shut Off Taps
- Guards, Engine and Transmission
- Handholds (Access On/Off Top Deck)
- Lift Arm Positioner for Return to Dig
- Radiator Grill, Swing Out
- Service Oil Sample
- Valve, Drain, Transmission Oil Filter
- Valve, Hydraulic, Standard

POWER TRAIN
- Engine Options:
  – Engine, Ventilation Reduction (VR)
  – VR Engine, Flow Thru Ready
  – Engine, Tier 3
- Exhaust:
  – Exhaust, Purifier, Muffler
- Fuel Adapters:
  – Standard Fill, Dual, Stainless Steel Covered, Single Braided Fuel Lines
  – Fast Fill, Dual, Rubber Coated, Double Steel Braided Fuel Lines
  – Fast Fill, Dual, Stainless Steel Covered, Single Braided Fuel Lines
- Secondary Steering System
ELECTRICAL
- Battery Disconnect Switch, In Cab
- Lighting:
  – Cat LED Worklights
OPERATOR ENVIRONMENT
- Camera, Color Rear Facing
- Duct, Air, Flow Diverter
- Idle Timer (enclosed cab)
- Instrumentation/Gauges:
  – Brake Pressure
- Seat:
  – Seat, Suspension, Tee, Vinyl
  – Seat, Suspension, Air, Vinyl
  – Seat Cover
TECHNOLOGY PRODUCTS
- Command for Underground*
- Vital Information Management System (VIMS) Gen 3
- Payload System, Loadrite
- Remote Control Interface (excludes Transmitter and Receiver) – RCT
- *Please consult with your Regional Commercial or Technology Representative prior to upgrading your machine to Command for Underground.
TIRES, RIMS, AND WHEELS
- Rim Identification Numbering
- Spare Rim, Tubeless
OTHER OPTIONAL EQUIPMENT
- Brake release arrangements:
  – Recovery hook
  – Recovery bar
- Buckets:
  – Various Sizes, Dump (9.5 m3/12.4 yd3, 10.5 m3/13.7 yd3)
  – Light Materials, Dump (11.6 m3/15.2 yd3)
  – Light Materials, Dump, Uninstalled (11.5 m3/15.0 yd3)*
- Bucket Lip:
  – Bolt On Lips
  – Durilock
- Ground Engaging Tools (GET):
  – Cutting Edge, Cat Weld-On
  – Cutting Edge, Bolt-On Half Arrow
  – Cutting Edge, Shrouds, Durilock
  – Mechanically Attached Wear Plate System (MAWPS) – Bucket Lip Protection
  – Heel Shrouds
  – Wear Bars
  – Liners
  – Overflow Guard
- Faster Fill and Evacuation Systems:
  – Engine, Fast Fill
  – Radiator, Fast Fill
  – Hydraulic, Fast Fill
  – Transmission, Fast Fill
- Draw Bar Attachment, Bolt-On
- Fire Suppression System:
  – Foam, Water Based
- Fluids:
  – Arctic Coolant
  – Arctic Fuel
- Guard, Light and Window
- Handrails
- Lubrication System:
  – Automatic
  – Centralized
- Mine Transfer
- Reversible Steering
- Reflective Tape
- Ride Control System
- Service Tools:
  – Collet Jacking Bolts
  – Recovery Bar
- Vandalism Protection
- Windows:
  – Dual Pane
- Wear Protection Bars:
  – Cab/ROPS
  – Hydraulic Tank
  – Radiator