New 725 Articulated Truck for Sale

725 Articulated Truck

Engine Model

Cat C9.3
Bore

4.5 in
Stroke

45.2 in
Displacement

567.5 in³

Engine

Engine Model: Cat C9.3
Bore: 4.5 in
Stroke: 45.2 in
Displacement: 567.5 in³
Peak Engine Torque Gross: 1275 ft·lbf
Gross Power: 342 HP
Net Power: 338 HP
Engine Model: Cat® C9.3
No Engine De: 3000 ft
Peak Engine Torque Net: 1263 ft·lbf
Net Power: 334 HP
Peak Engine Torque Speed: 1200 r/min
Note: The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Emissions: The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
Note: Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions.
Note: The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note: DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio

Weights

Rated Payload: 26.5 ton (US)

Body Capacities

Heaped: 19.6 yd³
Struck: 14.4 yd³
Tailgate Heaped SAE 2: 20.4 yd³
Tailgate Struck: 14.5 yd³

Transmission

Forward: 5 mT/hr
Forward: 9.4 mT/hr
Forward: 14.4 mT/hr
Forward: 22.1 mT/hr
Forward: 30.7 mT/hr
Forward: 36.3 mT/hr
Reverse: 5.5 mT/hr

Sound Levels

Interior Cab: 69 dB(A)
Note: The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling
Note: Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Operating Weights

Total: 103886 lb
Rear Axle: 23699 lb
Total: 50975 lb
Total: 52910 lb
Center Axle: 33944 lb
Front Axle: 5511 lb
Center Axle: 23699 lb
Center Axle: 10242 lb
Rear Axle: 33457 lb
Front Axle: 36484 lb
Rear Axle: 9757 lb
Front Axle: 30974 lb

Body Plate Thickness

Side Plates: 0.43 in
Front Plate: 0.28 in
Base Plate: 0.51 in

Service Refill Capacities

Fuel Tank: 91 gal (US)
Cooling System: 18 gal (US)
Hydraulic System: 29.1 gal (US)
Engine Crankcase: 8 gal (US)
Transmission: 10 gal (US)
Final Drives: 33 gal (US)
Output Transfer Gear Box: 5 gal (US)
DEF Tank: 4 gal (US)
Final Drive: 1.6 gal (US)
Steering: 24 gal (US)

Body Hoist

Raise Time: 10 s
Lower Time: 8 s

Steering

Lock to Lock: 4.75 seconds @ 60 rpm

Standards

Brakes: ISO 3450 – 2011
Cab: ISO 3449 Level II – 2008
Cab: ISO 3471 – 2008
Steering: ISO 5010 – 2007

Body Plate

Type: High strength Brinell HB450 wear resistant steel

Turning Circle

Turning Dimensions: 153 in
Turning Dimensions: 210 in
Turning Dimensions: 294 in
Turning Dimensions: 318 in
Turning Dimensions: 45°
Note: Dimensions are for machines equipped with 23.5R25 tires.

Optimal Loader/Truck Pass Matching

Wheel Loader: 5
Wheel Loader: 4-5
Wheel Loaders: 4
Hydraulic Excavators: 5-6
Wheel Loaders: 3-4
Hydraulic Excavators: 4-5

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
- Air conditioning with R134A refrigerant
- Machine operation monitoring system includes:
  – Action lamp
  – Engine oil pressure
  – Primary steering system
  – Left and right turn signal
  – High beam
  – Coolant temperature
  – Tachometer
  – Parking brake
  – Fuel level
  – Transmission oil temperature
  – Brake system
  – Transmission hold
  – Hoist control
  – Hydraulic system
  – Charging system
  – Retarder
  – Transmission fault
  – Traction control system
  – Check engine lamp
- Windows opening both sides, tinted
- Storage:
  – Cup holder
  – Flask receptacle
  – Under seat storage
  – Door pocket
  – Behind operator seat storage
  – Coat hook
- Glass windows:
  – Front, laminated and tinted
  – Sides and rear, toughened and tinted
- Seats:
  – Operator: fully adjustable, air suspension
  – Trainer: padded with lap belt
- Tilt and telescopic steering wheel
- Retractable belt: Operator seat and second seat
- Adjustable air vents
- Heater and defroster with four-speed fan
- Sun visor
- Touchscreen display incorporating the rearview camera video feed
- Windshield wiper and washer, two speed, intermittent (front)
- Combined gear selection and hoist control lever
- Windshield wiper and washer, two speed (rear)
- Liquid Crystal Display (LCD):
  – Alert indicator
  – Selected gear and direction
  – Speed or auto shift
  – Review Operation and Maintenance Manual (OMM)
  – Primary steering failure warning
  – Seat belt warning
  – Secondary steering failure warning
  – Diesel Particulate Filter (DPF) regeneration filter
  – Machine Security System (MSS) ready
  – Secondary steering energy source engaged
  – Hour meter
  – Retarder active
- Secondary steering – electro hydraulic
- Mirrors: extensive arrangement for improved visibility
CAT TECHNOLOGIES
- Product Link
- Cat Detect with Stability Assist
ELECTRICAL AND LIGHTING
- Electrical system: 24-volt, 5A 24- to 12-volt converter
- Lighting systems:
  – Cab interior
  – Two head lamps
  – Two width marker
  – Two reversing
  – Work light/cab access light
  – Two stop/tail lights
  – Front and rear direction indicators
- Main disconnect switch
- Horn
- Batteries (two) maintenance free
- Remote starting receptacle (cables not included)
POWER TRAIN
- Differentials: standard with automatic clutched inter- and cross-axle differential locks
- Cat Clean Emission Module (CEM) and exhaust aftertreatment package
- Cat C9.3 engine
- Three axle, six-wheel drive
- Retarder: engine compression brake
- Dual circuit oil immersed, enclosed brakes – all wheels
- Auto shift six-speed forward and single speed reverse transmission
SAFETY
- Reverse alarm
- Rearview camera
- ROPS/FOPS cab
GUARDS
- Front dump body spill guard, integral part of fabricated body
- Crankcase
- Axle
- Rear window
- Radiator
OTHER STANDARD EQUIPMENT
- Vandalism protection: lockable caps
- Mud flaps: wheel arch and body mounted with transportation tiebacks
- Sound suppression (only standard in Europe)
- S·O·S sampling valves
- Tires, six 23.5R25

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
OPTIONAL EQUIPMENT
- Cold weather coolant –51° C (–60° F)
- Infrared glass – high ambient cab
- Auto lube installation for automatic greasing of bearings
- Cold weather start attachment
- Bare chassis (no body) standard wheel base
- Roof mounted High Intensity Discharge (HID) work lights
- Product Link Elite: PLE641 (cellular). Product Link is optional.
- Heated/cooled seat
- Exhaust heated body
- Fuel additive – anti-waxing
- Flashing LED beacon
- Body liners
- Ether start
- Four-point seat belt
- Machine Security System (MSS)
- Cat Production Measurement payload monitoring system
- Sound suppression (only standard in Europe)
- Fast fuel fill
- Wheel chocks
- Engine block heater
- Heated rearview motorized mirrors
- Window blinds
- Bluetooth radio stereo system
- Scissor tailgate