Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Cold Planer

PM822 Cold Planer

  • Milling Width
    88 in
  • Rated Power
    806 hp
  • Operating Weight
    80910 lb
  • Maximum Milling Depth
    13 in
Cutting System
Milling Width
88 in
Maximum Milling Depth
13 in
Rotor Speeds
100 / 109 / 118 rpm
Number of Bits
193
Power Train
Rated Power
806 hp
Engine
Cat C18 twin-turbo
Maximum Travel Speed
3.7 mile/h
Maximum Milling Speed
328 ft/min
Global Emissions
Tier 4 Final / Stage IV
Weights
Operating Weight
80910 lb
Transport Weight
72312 lb
Dimensions
Operating Length
47.64 ft
Operating Width
10.2 ft
Height
13.29 ft
Maximum Truck Clearance
15.94 ft
Minimum Right Cutting Radius
5.91 ft
Minimum Left Cutting Radius
6.56 ft
Conveyor Swing
60 degrees from center
Transport Length
40.78 ft
Transport Width
8.99 ft
Transport Height
9.84 ft
Service Refill Capacities
Cooling System
27.5 gal (US)
Engine Oil
17.2 gal (US)
Fuel Tank
292.7 gal (US)
Hydraulic Tank
29.9 gal (US)
Water Spray System Tank
898.2 gal (US)
  • OPERATOR ENVIRONMENT
    • Ground control keypads
    • Single high-resolution LCD touchscreen display
    • 12-volt power receptacle
  • CAT CONNECT TECHNOLOGY
    • Cat Product Link
    • Cat GRADE
  • CONVEYOR
    • Grease tensioner
    • Material removal boost feature
  • ROTOR SYSTEM
    • Automatic plunge-cut
    • Automatic transition feature
    • Obstacle jump
    • Three cutting speeds
  • POWERTRAIN
    • Auto engine idle control
    • High capacity cooling system
    • Dual propel pumps
    • Automatic load control
  • HYDRAULIC SYSTEM
    • Dual pump hydraulic propel system
    • Traction control
  • SERVICE AND MAINTENANCE
    • Sampling ports for Scheduled Oil Sampling (S·O·S℠)
    • Power hood
    • Platform-level engine oil dipsticks
    • Rotor chamber water spray system
    • Air compressor
    • Accessory drive system
    • 3400 L (898 gal) onboard water tank
    • Side water fill valve
  • SAFETY AND SECURITY
    • Platform handrails
    • Signaling/warning horn
    • Wide-dispersion LED work lights
  • OPERATOR ENVIRONMENT
    • Dual high-resolution LCD touchscreen displays
    • Hydraulically folding canopy with LEDs
    • Air-ride suspension seats
    • Windscreens
  • CAT CONNECT TECHNOLOGY
    • Inboard ski
    • Sonic sensor (averaging or string line)
    • Ground level grade controls and displays
  • CONVEYOR
    • Dust abatement system
    • Remote camera (loading conveyor)
  • ROTOR SYSTEM
    • System K Rotor - Course (25 mm)
    • System K Rotor - Course (18 mm)
    • System K Rotor - Standard (15 mm)
    • System K Rotor - Fine (8 mm)
    • System K Rotor - Micro (6 mm)
    • System H Rotor - Micro (6x2 mm)
    • Diamond bits
    • Bit bucket trays
    • Pneumatic bit removal tool
    • Tool holder extractor
    • Rotor turning device with pendant control
  • POWERTRAIN
    • CE certificate
  • HYDRAULIC SYSTEM
    • Water tank transfer pump
    • Fuel transfer pump
  • SERVICE AND MAINTENANCE
    • High pressure washdown
    • Low pressure washdown
    • Additional spray bars
  • SAFETY AND SECURITY
    • Perimeter LED strip lights
    • Magnetic LED work light
    • Warning beacon (fixed or magnetic mount)
    • Truck signal lights
    • Remote camera (rear, front, magnetic mount)
Buckets - Loader: 2.9m³ (3.75yd³) Material Handling Bucket for Wheel Loaders
Buckets - Loader: 3.1m³ (4yd³) Material Handling Bucket for Wheel Loaders
Buckets - Loader: 3.1m³ (4yd³) Material Handling Bucket for Wheel Loaders
Buckets - Loader: 2m³ (2.6yd³) Material Handling Bucket for Wheel Loaders
Buckets - Loader: 2.7m³ (3.5yd³) Material Handling Bucket for Wheel Loaders
Buckets - Loader: 2.5m³ (3.25yd³) Material Handling Bucket for Wheel Loaders
Buckets - Loader: 2.8m³ (3.65yd³) Material Handling Bucket for Wheel Loaders
Buckets - Loader: 2.5m³ (3.25yd³) Material Handling Bucket for Wheel Loaders
Buckets - Loader: 17.2 m³ (22.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge
Buckets - Loader: 2.3m³ (3yd³) Material Handling Bucket for Wheel Loaders
Buckets - Loader: 14.5 m³ (19 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge
Buckets - Loader: 14.5 m³ (19 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge
Buckets - Loader: 14 m³ (18.25 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge
Buckets - Loader: 11.9 m³ (15.5 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge
Buckets - Loader: 11.9 m³ (15.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge
Buckets - Loader: 14 m³ (18.25 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge
Buckets - Loader: 5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge
Buckets - Loader: 5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge
Buckets - Loader: 5.0 m3 (6.5 yd3) Fusion™ Light Material Bucket With Bolt-On Cutting Edge
Buckets - Loader: 4.2 m3 (5.5 yd3) Fusion™ Light Material Bucket With Bolt-On Cutting Edge
Buckets - Loader: 4.2 m3 (5.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge