Compact Track Loaders
239D3 Compact Track Loader
-
Gross Power67.1 hp
-
Rated Operating Capacities1530 lb
-
Operating Weight7434 lb
-
Vehicle Width66 in
Engine
- Gross Power
- 67.1 hp
- Displacement
- 134.3 in³
- Bore
- 3.3 in
- Stroke
- 3.9 in
- Peak Torque
- 153 ft·lbf
- Net Power
- 65.8 hp
- Net Power
- 66.5 hp
- Engine Model
- Cat C2.2 CRDI
- Net Power
- 65.8 hp
Operating Specifications
- Rated Operating Capacities
- 1530 lb
- Tipping Load
- 4370 lb
- Breakout Force
- 3913 lb
- Rated Operating Capacity with Optional Counterweight
- 2400 lb
- Ground Contact Area
- 1373 in²
- Ground Pressure
- 5.4 psi
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual qui
- Ground Contact Area
- 1716 in²
- Ground Pressure
- 4.4 psi
- Rated Operating Capacities
- 2185 lb
Weights
- Operating Weight
- 7434 lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual qui
Dimensions
- Vehicle Width
- 66 in
- Ground Clearance
- 7.7 in
- Length
- 127.3 in
- Length
- 99.3 in
- Maximum Reach
- 53.4 in
- Turning Radius from Center
- 81.5 in
- Overall Length
- 71.2 in
- Reach
- 22.2 in
- Vehicle Width
- 69.1 in
- Maximum Overall Height
- 143.5 in
- Bucket Pin Height
- 8.6 in
- Length
- 54.5 in
- Clearance at Maximum Lift and Dump
- 81 in
- Bucket Pin Height
- 111.2 in
- Departure Angle
- 34.5°
- Rack Back Angle
- 85.5°
- Turning Radius from Center
- 45.6 in
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1730 mm (68 in) low profile bucket, 320 mm (12.6 in) tracks, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual qui
- Height
- 80.1 in
- Maximum Dump Angle
- 50.3°
- Turning Radius from Center
- 57.4 in
Hydraulic System
- Hydraulic Flow
- 26 gal/min
- Hydraulic Flow
- 3336 psi
- Hydraulic Flow
- 18 gal/min
- Hydraulic Flow
- 3336 psi
- Hydraulic Flow
- 50.9 hp
- Hydraulic Flow
- 35.5 hp
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
Power Train
- Travel Speed
- 7.6 mile/h
- Travel Speed
- 5 mile/h
Service Refill Capacities
- Cooling System
- 3.2 gal (US)
- Engine Crankcase
- 2.6 gal (US)
- Fuel Tank
- 15.1 gal (US)
- Hydraulic System
- 11.9 gal (US)
- Hydraulic Tank
- 9 gal (US)
Noise Level
- Note
- **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spe
- Outside Cab
- 103 dB(A)
- Note
- ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
- Note
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Inside Cab
- 83 dB(A)
Air Conditioning System (if equipped)
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
-
ELECTRICAL
- 12 volt Electrical System
- 80 ampere Alternator
- Ignition Key Start/Stop Switch
- Lights: Gauge Backlighting, Two Rear Tail Lights, Two Adjustable Front and Rear Halogen Lights, Dome Light
- Backup Alarm
- Heavy Duty Battery, 850 CCA
-
OPERATOR ENVIRONMENT
- Gauges: Fuel Level, Hour Meter
- Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged
- Adjustable Vinyl Seat
- Fold In Ergonomic Contoured Armrest
- Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
- ROPS Cab, Open, Tilt Up
- FOPS, Level I
- Top and Rear Windows
- Floor Mat
- Interior Rearview Mirror
- 12 volt Electric Socket
- Horn
- Hand (Dial) Throttle, Electronic
- Adjustable Joystick Controls
- Anti-theft Security System with 6-button Keypad
- Storage Compartment with Netting
-
POWER TRAIN
- Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V emission standards
- Air Cleaner, Dual Element, Radial Seal
- S·O·SSM Sampling Valve, Hydraulic Oil
- Filters, Cartridge-type, Hydraulic
- Filters, Canister-type, Fuel and Water Separator
- ATAAC/Radiator/Hydraulic Oil Cooler (side-by-side)
- Spring Applied, Hydraulically Released Parking Brakes
- Hydrostatic Transmission, Two Speed Travel
- Suspension – Independent Torsion Axles (4)
-
OTHER
- Engine Enclosure, Lockable
- Extended Life Antifreeze, –36° C (–33° F)
- Machine Tie Down Points (6)
- Support, Lift Arm
- Hydraulic Oil Level Sight Gauge
- Radiator Coolant Level Sight Gauge
- Radiator, Expansion Bottle
- Cat ToughGuard™ Hose
- Auxiliary, Hydraulics, Continuous Flow
- Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release
- Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
- Electrical Outlet, Beacon
- Belly Pan Cleanout
- Variable Speed Demand Fan
- Product Link™ PL240, Cellular
-
MANDATORY EQUIPMENT
- Hydraulics, Standard or High Flow
- Quick Coupler, Mechanical or Powered
- High Visibility Seat Belt, 50 mm (2 in) or 75 mm (3 in)
- EU Preparation Package (Europe only)
- Steel Imbed Rubber Track – 320 mm (12.6 in) Block Tread or 400 mm (15.7 in) Bar Tread
- Dual Flange Front Idler/Single Flange Rear Idler
- PERFORMANCE PACKAGES:
– Performance Package H1: Standard Flow Hydraulics (No Self Level)
– Performance Package H2: Standard Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
– Performance Package H3: High Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower) - COMFORT PACKAGES:
– Open ROPS (C0): Static Seat (No Foot Throttle, Headliner, Heater or Door)
– Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) (No Heater or Door)
– Enclosed ROPS with Heater (C2): Foot Throttle, Headliner, Heater and Defroster, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate)
– Enclosed ROPS with A/C (C3): C2 + Air Conditioner
-
OPTIONAL EQUIPMENT
- Hand-Foot Style Controls
- External Counterweights
- Beacon, Rotating
- Engine Block Heater – 120V
- Oil, Hydraulic, Cold Operation
- Paint, Custom
- Product Link PL641, Cellular
- Ride Control
- Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen, Advanced Multi-operator Security System, On-screen Adjustments for Implement Response, Hystat Response and Creep Control
- Work Tool Return to Dig and Work Tool Positioner
- Bluetooth® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)
- $59,500 2021 Cat 272D3XE
- $193,000 2022 Cat 315-07
- 2022 Cat D8T
- $98,500 2019 Cat D3K2LGP
- 2022 Cat D8T
-
Browse All Used Equipment Inventory
View More