New 824 Wheel Dozer for Sale

824 Wheel Dozer

Engine Model

Cat® C15
Rated Speed

1800 r/min
Net Power

405 HP
Net Power

405 hp

Engine

Engine Model: Cat® C15
Rated Speed: 1800 r/min
Net Power: 405 HP
Net Power: 405 hp
Net Power: 405 hp
Engine Power: 425 hp
Gross Power: 434 hp
Peak Net Torque: 1479 lbf·ft
Torque Rise: 33%
Maximum Altitude without Derating: 9298 ft
Maximum Altitude without Derating: 9098 ft
Bore: 5.4 in
Stroke: 6.7 in
Displacement: 927.6 in³
High Idle Speed: 2300 r/min
Low Idle Speed: 800 r/min
Emissions: Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emissions standards. The other meets Brazil MAR-1 emission standards, emitting equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Note: Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Note: Two emission configurations are available. One meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emissions standards. The other meets Brazil MAR-1 emission standards, emitting equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Gross Power: 435 HP

Operating Specifications

Operating Weight: 74966 lb
Chip Scoop Operating Weight: 83820 lb
Coal Scoop Operating Weight: 80756 lb

Transmission

Transmission Type: Cat planetary - powershift - ECPC
Forward: 3.8 mile/h
Forward: 6.9 mile/h
Forward: 12.2 mile/h
Forward: 21.6 mile/h
Reverse: 4.3 mile/h
Reverse: 7.8 mile/h
Reverse: 13.9 mile/h
Reverse: 24.7 mile/h

Hydraulic System - Lift/Tilt

Pump Flow at 1: 30.9 gal/min
Main Relief Pressure: 3771 psi
Maximum Supply Pressure: 3495 psi
Cylinders: 120 mm × 1070 mm (4.7 in × 42.1 in)
Cylinder: 140 mm × 230 mm (5.5 in × 9.1 in)

Hydraulic System - Steering

Steering System: Pilot operated, load sensing
Bore: 4.5 in
Stroke: 22.7 in
Steering System: Variable displacement piston
Max Flow at 1: 22.5 gal/min
Relief Valve Setting: 3481 psi
Vehicle Articulation Angle: 86

Service Refill Capacities

Cooling System: 30.6 gal (US)
Engine Crankcase: 9 gal (US)
Transmission: 17.4 gal (US)
Fuel Tank: 206.6 gal (US)
Diesel Exhaust Fluid Tank: 8.5 gal (US)
Differential: 26.4 gal (US)
Differential: 29.1 gal (US)
Hydraulic Tank Only: 35.4 gal (US)
Hydraulic System: 56.5 gal (US)
AC Refrigerant: 20 hg
AC Oil: 4.94 fl oz (US)
Note: All nonroad Tier 4 Final, EU Stage V, and Japan 2014 (Tier 4 Final) diesel engines are required to use:– Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.– Cat engines are compatible with the following renewable, alter

Air Conditioning System

Air Conditioning: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.

Axles

Front: Planetary – Fixed
Rear: Planetary – Oscillating
Oscillation Angle: ±11°

Braking System

Parking Brake: Drum and shoe, spring applied, hydraulic released
Brakes: Multi-disc wet (enclosed) 4 WHL

Sound Performance - Standard

Operator Sound Level: 73 dB(A)
Machine Sound Level: 113 dB(A)

Sound Performance

Operator Sound Level: 73 dB(A)
Machine Sound Level: 113 dB(A)
Operator Sound Level: 72 dB(A)
Machine Sound Level: 110 dB(A)
Note 1: The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70% of maximum engine cooling fan speed.
Note 2: Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note: The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70% of maximum engine cooling fan speed.

Sound Performance - Tier 4 Final / Stage V

Operator Sound Pressure Level: 73 dB(A)
Machine Sound Power Level: 113 dB(A)
Operator Sound Pressure Level: 72 dB(A)
Machine Sound Power Level: 110 dB(A)
Note: * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note: ** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note: The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note: The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note: Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Sound Performance - Suppression

Operator Sound Level: 72 dB(A)
Machine Sound Level: 110 dB(A)

Sound Performance - Tier 3 / Stage IIIA

Operator Sound Pressure Level: 73 dB(A)
Machine Sound Power Level: 113 dB(A)
Operator Sound Pressure Level: 72 dB(A)
Machine Sound Power Level: 110 dB(A)
Note: * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note: ** European Union Directive “2000/14/EC” as amended by “2005/88/EC.” and UK Noise Regulation 2001 No. 1701
Note: The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note: The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note: Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Dimensions (Approximate)

Height to Top of Beacon: 14.5 ft
Height: 14.2 ft
Height: 10.5 ft
Ground Clearance: 2.8 ft
Centerline of Rear Axle to Edge of Bumper: 9.28 ft
Centerline of Front Axle to Hitch: 6.1 ft
Wheel Base: 12.1 ft
Length: 27.6 ft
Ground Clearance to Trunnion: 1.45 ft
Height: 13.5 ft
Width Over Guardrails: 11.04 ft
Ground Clearance: 1.8 ft

Scoops

Coal Scoop Carry Capacity: 17.5 yd³
Coal Scoop Doze Capacity: 35 yd³
Chip Scoop Carry Capacity: 27 yd³
Chip Scoop Doze Capacity: 54 yd³

Straight Blade

Capacity: 6.6 yd³
Width Over End Bits: 177.4 in
Height: 48.4 in
Dig Depth: 17.6 in
Ground Clearance: 41.6 in
Maximum Tilt: 45.9 in
Turning Radius: 23.7 ft
Turning Radius: 10.15 ft

Straight Push Plate Blade

Capacity: 6.6 yd³
Width Over End Bits: 177.4 in
Height: 48.4 in
Dig Depth: 17.6 in
Ground Clearance: 41.6 in
Maximum Tilt: 45.9 in
Turning Radius: 23.2 ft
Turning Radius: 10.2 in³

Semi-Universal Blade

Capacity: 10 yd³
Width Over End Bits: 174.1 in
Height: 61.1 in
Dig Depth: 18.8 in
Ground Clearance: 42 in
Maximum Tilt: 44.1 in
Turning Radius: 23.8 ft
Turning Radius: 10.8 ft

Universal Blade

Capacity: 10 yd³
Width Over End Bits: 171.3 in
Height: 53.1 in
Dig Depth: 18.1 in
Ground Clearance: 41.4 in
Maximum Tilt: 44.6 in
Turning Radius: 23.9 ft
Turning Radius: 11.3 ft

Coal Blade

Capacity: 21.2 yd³
Width Over End Bits: 189 in
Height: 68.7 in
Dig Depth: 18.6 in
Ground Clearance: 42.2 in
Maximum Tilt: 48.9 in
Turning Radius: 24.9 ft
Turning Radius: 11.4 ft

Extended Wear Blade

Capacity: 10.6 yd³
Width Over End Bits: 171.6 in
Height: 53.1 in
Dig Depth: 18.1 in
Ground Clearance: 41.4 in
Maximum Tilt: 44.6 in
Turning Radius: 23.9 ft
Turning Radius: 11.4 ft

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
SAFETY
- Camera, rear vision
- Alarm, back-up
- Light, warning switched (LED beacon)
- Lighting, access stairway
- Cab Integrated Object Detection System (CIODS) ready
- Mirror, internal (panoramic)
- Mirrors, rearview (externally mounted)
- Seat belt with minder, retractable, 76 mm (3 in) wide
- STIC control system with lockout
- Emergency platform egress
- Stairway, left and right rear access
- Toe kicks
EFFICIENCY
- Hydraulically driven demand fan
POWER TRAIN
- Air to air aftercooler
- Auto shift
- Brakes, full hydraulic, enclosed, wet multiple disc service brakes
- Cat clean emission module (Tier 4 Final/Stage V equivalent)
- Electro-hydraulic parking brake
- Electronic Clutch Pressure Control (ECPC)
- Engine, Cat C15 - U.S. EPA Tier 4 Final/EU Stage V/Korea Stage V and Japan 2014 emissions standards or Brazil MAR-1 emission standards, emitting equivalent to U.S. EPA Tier 3 and EU Stage IIIA
- Fuel priming pump (electric)
- Fuel to air cooler
- Integrated braking system
- Muffler (under hood) (Tier 3/Stage IIIA)
- Radiator, Aluminum Modular (AMR)
- Separated cooling system
- Single Clutch Speed Shifting (SCSS)
- Throttle lock
- Torque converter with Lock Up Clutch (LUC)
- Transmission, planetary, with 4F/4R speed range control
ELECTRICAL
- Alternator, 150 amp
- Batteries, maintenance-free (4 – 1,000 CCA)
- Electrical system, 24V
- Lighting system, halogen (front and rear)
- Lights, directional (rear)
- Starter, electric (heavy duty)
- Starting receptacle for emergency start
OPERATOR ENVIRONMENT
- Radio, CB (ready)
- 12V power port for mobile phone or laptop connection
- Air conditioner
- Cab, sound-suppressed pressurized, internal four-post rollover protective structure/ falling objects protective structure (ROPS/ FOPS), radio ready for entertainment includes antenna, speakers, converter (12-volt 10/15-amp), and power port
- Cab door, sliding window (LH)
- Coat and hard hat hooks
- Electro-hydraulic tilt and lift controls
- Finger tip shifting controls
- Flip-up armrest
- Heater and defroster
- Horn, electric
- Implement hydraulic lockout
- Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage V) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
- Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
- Cab precleaner, powered
- Light, (dome) cab
- Lunch box and beverage holders
- Seat, premium plus containing forced air heating and cooling, two-way thigh adjustment, power lumbar and back bolster adjustment, ride stiffness adjustment, dynamic end dampening, and leather finish
- Sun visor, front
- Rubber mounted, laminated, tinted glass
- Transmission gear (indicator)
- Vital Information Management System (VIMS): – Graphical information display – External data port – Customizable operator profiles
- Wet-arm wipers/washers (front and rear): – Intermittent wipers (front and rear)
COLD WEATHER
- Starting aid (ether) automatic
- Mirrors, heated
- Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)
OTHER
- Guard, driveshaft
- Guards, crankcase and power train
OTHER STANDARD EQUIPMENT
- Fold down exhaust stack for shipping
- Fuel tank, 782 L (207 gal)
- Hitch, drawbar with pin
- Hoses, Cat XT
- Hydraulic, engine, and transmission oil coolers
- Secondary steering
- Steering, load sensing
- Vandalism protection caplocks
- Venturi stack
SERVICE
- Ground level engine shutoff
- Ground level lockable master disconnect switch
- Doors, service access (locking)
- Ecology drains for engine, radiator, transmission, hydraulic tank
- Engine, crankcase, 500 hour interval with CJ-4 oil
- Engine precleaner
- Fire suppression ready
- Oil change system, high speed
- Oil sampling valves
- Product Link
- Total hydraulic filtration system

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
- Radio, AM/FM/AUX/USB/BLUETOOTH
BLADES
- Blade, Straight
- Blade, Straight with Push Plate
- Blade, Semi-U
- Blade, U
- Blade, Extended Wear U
- Blade, Coal U
COLD WEATHER
- Heater, engine coolant, 120V
- Heater, engine coolant, 240V
- Antifreeze, –50° C (–58° F)
OTHER
- Counterweight, Front
MISCELLANEOUS
- Film (ANSI) (Tier 4 Final/Stage V equivalent)
- EU certification (Tier 4 Final/Stage V equivalent)
- Plate – year of manufacture (Tier 3/Stage IIIA equivalent)
SERVICE
- Tire Pressure Monitoring System
- Dual stage engine precleaner
POWER TRAIN
- No-spin rear axle