Electric Rope Shovels

Dipper Payload

120 t

Dipper Capacity

30.6-62.7 m3 (40-82 yd3)

Length of boom

67.0 ft

Overall length of dipper handle

47.0 ft

Note

Dependent on application and material density

Dipper Payload

120 t

Note

Dependent on application and material density

Working Weight

3056000 lb

Net weight

2173820.0 lb

Note

These weights will vary slightly depending upon dipper and optional equipment selection

Note

All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) treads

Ballast

667150 lb

Note

These weights will vary slightly depending upon dipper and optional equipment selection

Note

All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.

Crawler Mounting

46.6 m2 (288 kPa); 501.7 ft2 (41.8 psi)

Hoist

A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.

Planetary Propel

Dual-motor independent drive

Revolving Frame

27.49 ft

Revolving Frame

12.07 ft

Swing

Two planetary gearboxes, each driven by a vertically mounted motor, are mounted on either side of the revolving frame.

Swing

Dual-output pinion shafts from each gearbox engage the swing rack.

Turntable

17.26 ft

Turntable

50

Turntable

10.75 in

Turntable

14.83 ft

Turntable

9.5 in

Crawler Dimensions

36 ft

Crawler Dimensions

38 ft

Ground Bearing Pressure

47 m2 (297 kPa); 501 ft2 (43 psi)

Ground Bearing Pressure

Ground bearing pressure is dependent upon many factors

Planetary Propel

Dual-motor independent drive

Hoist

A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.

Upper Works Overall Width

41.9 ft

Ground Bearing Pressure

Ground bearing pressure is dependent upon many factors

Hoist

A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.

Planetary Propel

Dual-motor independent drive

Crawler Dimensions

36 ft

Crawler Dimensions

38 ft

Ground Bearing Pressure

36 m2 (380 kPa); 386 ft2 (55 psi)

Ground Bearing Pressure

47 m2 (297 kPa); 501 ft2 (43 psi)

Swing

Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.

Type

Automatic, single-line system for open gear lubricant and grease

Components

Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room

Components

External FastFil from lower level

Components

External FastFil from lower level

Lights

HPS lights on boom feet, top of A-frame, machinery house, lube room, control room, and utility room.

Lights

Incandescent lights for ground lights and on walkways.

Main Electrical Systems

350 kVA, 7200V primary

Trail cable

SHD-3-#1/0 at 8000V

Transformer

350 kVA, 7200V primary

Power Requirements

7,200V, 13,800V

Power Requirements

934-1308 kW

Power Requirements

3 phase, 50/60 Hz, 7,200V

Power Requirements

6,000V, 6,600V, 7,200V, 11,000V

Power Requirements

7,200V, 13,800V

Power Requirements

934-1308 kW

Power Requirements

3737 kW

Power Requirements

Other voltage options available to suit customer requirements

System Voltage

50/60 Hz, 7,200V

Drive

IGBT Acutrol drive system

Boom

welded, impact-resistant steel

Boom

96.0 in

Boom

twin-grooved, flame-hardened

Boom

34.0 in

Boom

3.0 in

Rope Data

single

Rope Data

8 x 37

Rope Data

2.75 in

Rope Data

8 × 37

Rope Data

2.5 in

Rope Data

1

Rope Data

single dual

Rope Data

2

Rope Data

1

Rope Data

1

Rope Data

4

Rope Data

1

Rope Data

2.75 in

Rope Data

2.5 in

Rope Data

2.5 in

Rope Data

3.25 in

Rope Data

0.75 in

Rope Data

High impact ropes available as an option

Crowd

Rope Crowd with the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.

Crowd

(Optional) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.

Type

One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.

Rope Data

3.25 in

Rope Data

4

Rope Data

2.5 in

Rope Data

1

Rope Data

0.75 in

Rope Data

1

Rope Data

2.75 in

Rope Data

2

Rope Data

High impact ropes available as an option

Rope Data

2.5 in

Rope Data

1

Crowd

Rope Crowd with the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.

Crowd

(Optional) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.

Maximum dumping radius

71.0 ft

Dipper Capacities

30.6-62.7 m3 (40-82 yd3)

Dipper Payload

120 ton (US)

Maximum Dumping Height

28.9 ft

Operating Weight

3056000 lb

Maximum clearance radius

30.64 ft

Maximum cutting height

58.4 ft

Maximum cutting radius

82.68 ft

Maximum dumping radius

71.0 ft

Operator

34.81 ft

Overall width

43.0 ft

Radius of level floor

57.32 ft

Dumping Height

28.9 ft

Cutting Height

53.5 ft

Cutting Radius

80 ft

Radius of Level Floor

56.1 ft

Revolving Frame Tail Swing Radius

30.5 ft

Note

Optimal working ranges based on loading a Cat 797F truck.

Note

*All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.