Excavators
315 GC Hydraulic Excavator
-
Net Power98 hp
-
Engine ModelCat C3.6
-
Engine Power100 hp
-
Engine Power101 hp (metric)
Engine
- Net Power
- 98 hp
- Engine Model
- Cat C3.6
- Engine Power
- 100 hp
- Engine Power
- 101 hp (metric)
- Net Power
- 100 hp (metric)
- Bore
- 4 in
- Stroke
- 5 in
- Displacement
- 220 in³
- Biodiesel Capability
- Up to B20¹
- Emissions
- Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards
- Note
- Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time
- Note
- ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO
Hydraulic System
- Main System
- 247 L/min (65 gal/min)
- Maximum Pressure
- 5075 psi
- Maximum Pressure
- 5075 psi
- Maximum Pressure
- 3770 psi
Swing Mechanism
- Swing Speed
- 11.5 r/min
- Maximum Swing Torque
- 25815 ft·lbf
Weights
- Operating Weight
- 34000 lb
Service Refill Capacities
- Fuel Tank Capacity
- 49.4 gal (US)
- Cooling System
- 4 gal (US)
- Engine Oil
- 2.1 gal (US)
- Final Drive
- 0.8 gal (US)
- Hydraulic System
- 22.5 gal (US)
- Hydraulic Tank
- 19 gal (US)
Dimensions
- Boom
- Reach 4.65 m (15'3")
- Stick
- Reach R3.0 m (9'10")
- Bucket
- GD 0.53 m³ (0.69 yd³)
- Shipping Height
- 9.2 ft
- Handrail Height
- 9.4 ft
- Shipping Length
- 24.6 ft
- Shipping Length
- 26.5 ft
- Tail Swing Radius
- 5.1 ft
- Counterweight Clearance
- 2.9 ft
- Ground Clearance
- 1.4 ft
- Track Length
- 12.3 ft
- Length to Center of Rollers
- 10 ft
- Track Gauge
- 6.5 ft
- Transport Width
- 8.8 ft
Working Ranges and Forces
- Maximum Digging Depth
- 19.6 ft
- Boom
- Reach 4.65 m (15'3")
- Stick
- Reach R3.0 m (9'10")
- Bucket
- GD 0.53 m³ (0.69 yd³)
- Maximum Reach at Ground Level
- 28.5 ft
- Maximum Cutting Height
- 31.7 ft
- Maximum Loading Height
- 23.6 ft
- Minimum Loading Height
- 6.8 ft
- Minimum Working Equipment Radius
- 7.3 ft
- Bucket Digging Force
- 22180 lbf
- Stick Digging Force
- 13330 lbf
Working Ranges & Forces
- Maximum Depth Cut for 2440 mm
- 19.1 ft
- Maximum Vertical Wall Digging Depth
- 17 ft
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 hg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes.
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
BOOM AND STICKS
- 4.65 m (15'3") Reach boom
-
CAB
- Rollover protective structure (ROPS)
- Comfort Cab: mechanical suspension seat, 203 mm (8") touch screen monitor
-
CAT TECHNOLOGIES
- VisionLink®
- Remote Flash
-
ELECTRICAL SYSTEM
- Maintenance free battery
- LED chassis light, left-side/right-side boom lights, cab lights
- Programmable time-delay LED working lights
- Centralized electrical disconnect switch
-
ENGINE
- Cat C3.6 single turbo diesel engine
- Auto engine speed control
- Engine idle shutdown
- 52°C (125°F) high-ambient cooling capacity without de-rate
- -25°C (-13°F) cold start capability
- Electric fuel priming pump
- Variable speed fan
- Single fuel filtration system
- Double element air filter with integrated precleaner
- Biodiesel capability up to B20
-
HYDRAULIC SYSTEM
- Boom and stick regeneration circuit
- Auto hydraulic warm up
- Auto two speed travel
- Electric main control valve
- Boom and stick drift reduction valve
- Single type electronic pump
- Auxiliary line support
-
SAFETY AND SECURITY
- Rear and right-side-view cameras
- Ground-level engine shutoff switch
- Service platform with anti-skid plate and countersunk bolts
- Signaling/warning horn
- Auto Hammer Stop
-
SERVICE AND MAINTENANCE
- Grouped engine oil and fuel filters
- Ground-level engine oil dipstick
- Sampling ports for Scheduled Oil Sampling (S·O·S)
- Integrated vehicle health management system
- Lockable disconnect switch
-
UNDERCARRIAGE AND STRUCTURES
- Grease lubricated track link
- Tie down points on base frame
- 3830 kg (8,440 lb) counterweight
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
BOOM AND STICKS
- 2.5 m (8'2") Reach stick
- 2.8 m (9'2") Reach stick
- 2.8 m (9'2") Thumb Ready Reach stick
- 3.0 m (9'10") Reach stick
-
HYDRAULIC SYSTEM
- Boom and stick lowering check valves
- Medium-pressure line
- High-pressure line
- Quick coupler line
-
SAFETY AND SECURITY
- Swing alarm
- Inspection lighting
-
CAT TECHNOLOGIES
- VisionLink Productivity
-
UNDERCARRIAGE AND STRUCTURES
- 500 mm (20 in) triple grouser shoes
- 500 mm (20 in) triple grouser shoes with rubber pad
- 500 mm (20") rubber track shoes
- 600 mm (24") triple grouser shoes
- 600 mm (24") rubber track shoes
- 700 mm (28") triple grouser shoes
- 770 mm (30") triple grouser shoes
- 2,500 mm (8'2") blade
- 2,600 mm (8'6") blade
- 2,700 mm (8'10") blade
- $59,500 2021 Cat 272D3XE
- $193,000 2022 Cat 315-07
- 2022 Cat D8T
- $98,500 2019 Cat D3K2LGP
- 2022 Cat D8T
-
Browse All Used Equipment Inventory
View More