New 988 Wheel Loader for Sale

988 Wheel Loader

Net Power

541 HP
Net Power

541 HP
Engine Power

580 hp
Engine Power

580 HP

Engine

Net Power: 541 HP
Net Power: 541 HP
Engine Power: 580 hp
Engine Power: 580 HP
Gross Power: 588 HP
Engine Model: Cat® C18
Rated Speed: 1700/rpm
Peak Power Speed: 1500/rpm
Emissions: U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards, Brazil MAR-1 and China Nonroad Stage IV emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, and U.S. EPA Tier 2 and EU Stage II
Gross Power: 588 hp
Net Power: 538 hp
Bore: 5.7 in
Stroke: 7.2 in
Displacement: 1105 in³
Peak Torque: 2104 lbf·ft
Torque Rise: 58 %
Note: Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio
Note: Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Peak Power Speed: 580 HP
Peak Power Speed: 588 HP
Peak Power Speed: 541 HP
Gross: 580 HP

Operating Specifications

Operating Weight: 112574 lb
Bucket Capacity Range: 4.7-13 m3 (6.2-17 yd3)
Rated Payload: 12.5 t
Rated Payload: 16 t
Cat Truck Match: 770 - 772
Cat Truck Match: 773 - 775

Transmission

Transmission Type: Cat planetary powershift
Forward: 4 mile/h
Forward: 7.2 mile/h
Forward: 12.7 mile/h
Forward: 21.6 mile/h
Reverse: 4.7 mile/h
Reverse: 8.3 mile/h
Reverse: 14.4 mile/h
Direct Drive: Lock-up disabled
Direct Drive: 7.8 mile/h
Direct Drive: 13.9 mile/h
Direct Drive: 24.4 mile/h
Direct Drive: 5 mile/h
Direct Drive: 8.9 mile/h
Direct Drive: 15.8 mile/h

Hydraulic System - Lift/Tilt

Lift: EH- Positive Flow Control, Flow Sharing
Lift: Variable displacement piston
Lift: Variable displacement piston
Maximum Flow at 1: 153 gal/min
Relief Valve Setting: 4757 psi
Cylinders: 210 mm × 1050 mm (8.7 in × 41.3 in)
Cylinders: 266 mm × 685 mm (8.7 in × 27 in)
Pilot System: Variable displacement piston
Relief Valve Setting: 551 psi
Maximum Flow: 13.7 gal/min

Hydraulic Cycle Time (1,400-1,860 rpm)

Rack Back: 4.5 s
Raise: 8 s
Dump: 2.2 s
Lower Float Down: 3.5 s
Total Hydraulic Cycle Time: 18.2 s

Hydraulic System - Steering

Steering System: Pilot, load sensing
Steering System: Piston, variable displacement
Maximum Flow: 71.3 gal/min
Maximum Flow at 1: 71.3 gal/min
Relief Valve Setting: 4351 psi
Total Steering Angle: 86 °
Steering Cycle Times: 3.4 s
Steering Cycle Times: 5.6 s

Air Conditioning System

Air Conditioning: • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the sy

Axles

Front: Fixed
Rear: Trunnion
Oscillation Angle: 13 °

Service Refill Capacities

Diesel Exhaust Fluid Tank: 8.7 gal (US)
Diesel Exhaust Fluid Tank: 8.7 gal (US)
Fuel Tank: 188 gal (US)
Cooling System: 31.7 gal (US)
Coolant: 33 gal (US)
Crankcase: 15.9 gal (US)
Diesel Exhaust Fluid Tank: 8.7 gal (US)
Transmission: 24.3 gal (US)
Transmission: 29 gal (US)
Differential: 49.1 gal (US)
Differential: 49.1 gal (US)
Hydraulic System Factory Fill: 125.5 gal (US)
Hydraulic System: 63.4 gal (US)
Note: • All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl e

Brakes

Brakes: ISO 3450:2011

Operator's Cab

ROPS: ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

Sound Performance - Tier 4 Final / Stage V

Operator Sound Pressure Level: 73 dB(A)
Machine Sound Power Level: 111 dB(A)
Operator Sound Pressure Level: 72 dB(A)
Machine Sound Power Level: 109 dB(A)
Note: * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note: ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note: The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note: The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note: Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Sound Performance - Tier 4 Final/EU Stage V - Standard

Operator Sound Level: 72 dB(A)
Machine Sound Level: 111 dB(A)
Note: The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note: Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Sound Performance - Tier 4 Final / Stage V - Standard

Operator Sound Pressure Level: 73 dB(A)
Machine Sound Power Level: 111 dB(A)

Sound Performance - Tier 3 / Stage IIIA

Operator Sound Pressure Level: 73 dB(A)
Machine Sound Power Level: 112 dB(A)
Operator Sound Pressure Level: 72 dB(A)
Machine Sound Power Level: 110 dB(A)
Note: * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note: ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note: The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note: The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note: Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Sound Performance - Tier 3 / Stage III - Standard

Operator Sound Pressure Level: 73 dB(A)
Machine Sound Power Level: 112 dB(A)

Dimensions (Approximate) - Standard Lift Linkage

Ground to Top of ROPS: 13.8 ft
Ground to Top of Exhaust Stacks: 14.8 ft
Ground to Top of Hood: 10.9 ft
Rear Axle: 10.5 ft
Front Axle Centerline to Bucket Tip: 14 ft
Wheel Base: 14.9 ft
Maximum Overall Length: 39.3 ft
Ground to Lower Hitch Clearance: 1.9 ft
Clearance at Maximum Lift: 11.9 ft
B: 18 ft
Maximum Overall Height: 24.5 ft
Reach: 6.5 ft

Dimensions (Approximate) - High Lift Linkage

Ground to Top of ROPS: 13.8 ft
Ground to Top of Exhaust Stacks: 14.8 ft
Ground to Top of Hood: 10.9 ft
Rear Axle: 10.5 ft
Front Axle Centerline to Bucket Tip: 15.3 ft
Wheel Base: 14.9 ft
Maximum Overall Length: 40.7 ft
Ground to Lower Hitch Clearance: 1.9 ft
Clearance at Maximum Lift: 13.3 ft
B: 19.3 ft
Maximum Overall Height: 25.8 ft
Reach: 6.8 ft

Buckets

Bucket Capacities: 4.7-13 m3 (6.2-17 yd3)

Sound Performance - Tier 4 Final/Stage IV - Standard

Machine Sound Level: 111 dB(A)
Operator Sound Level: 72 dB(A)

Sound Performance - Tier 4 Final/Stage IV: Suppression

Operator Sound Level: 72 dB(A)
Machine Sound Level: 109 dB(A)

Sound Performance - Tier 2 Equivalent/Stage II: Standard

Machine Sound Level: 112 dB(A)
Operator Sound Level: 73 dB(A)

Sound Performance - Tier 2 Equivalent/Stage II: Suppression

Machine Sound Level: 110 dB(A)
Operator Sound Level: 72 dB(A)

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
ELECTRICAL
- Alarm, back-up
- Alternator, single 150 amp
- Batteries, dry
- Converter, 10/15 amp, 24V to 12V
- Lighting system (LED, work lights, access and service platform lighting)
- Starting and charging system, 24V
- Auxiliary jump start receptacle
- Starter lockout in bumper
- Transmission lockout in bumper
OPERATOR ENVIRONMENT
- Graphical Information Display, displays real time operating information, performs calibrations and customizes operator settings
- CB radio ready
- Air conditioner
- Cat Vision, rear vision camera system
- Cab, sound suppressed and pressurized, integrated rollover protective structure/falling objects protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 5-amp) and power port
- Controls, lift and tilt function
- Heater, defroster
- Horn, electric
- Instrumentation, gauges: – Coolant temperature – Engine hour meter – Hydraulic oil temperature – Powertrain oil temperature
- Light, cab, dome
- Lunchbox, beverage holders
- Radio, AM/FM/CD/MP3 Bluetooth^®
- Mirrors, rearview (externally mounted)
- Rimpull Control System (RCS)
- Seat, deluxe
- Seat belt minder
- Seat belt, retractable, 76 mm (3 in) wide
- Steering and Transmission Integrated Control (STIC^™) System
- UV glass
- Vital Information Management System (VIMS^™) with Graphical Information Display: External Data Port
- Wet-arm wipers/washers (front and rear): – Intermittent front and rear wipers
- Lights, directional
POWERTRAIN
- Brakes, oil-cooled, multi-disc, service/secondary
- Case drain screens
- Electro hydraulic parking brake
- Engine, C18 Mechanically Actuated Electronic Unit Injection (MEUI^™) diesel, turbocharged/aftercooled
- Ground level engine shutdown switch
- Turbine precleaner, engine air intake
- Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
- Radiator, Aluminum Modular Radiator (AMR)
- Starting aid, ether, automatic
- Throttle lock, electronic
- Torque converter, Impeller Clutch (ICTC) with Lock up clutch (LUC), Rimpull Control System
- Transmission, planetary powershift, 4F/3R electronic control
- Manual switch and automatic fuel priming
- Cat Production Measurement ready
ADDITIONAL EQUIPMENT
- Base machine price includes a rim allowance
- Hydraulically driven demand fan
- Couplings, Cat O-ring face seals
- Doors, service access (locking)
- Ecology drains for engine, radiator, hydraulic tank
- Fuel tank, 712 L (188 gal)
- Hitch, drawbar with pin
- Hoses, Cat XT^™
- Hydraulic, steering and brake filtration/screening system
- Cat Clean Emission Module (CEM)
- Oil sampling valves
- Rear access to cab and service platform
- Steering, load sensing
- Toe kicks
- Vandalism protection caplocks

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
POWERTRAIN
- –50° C (–58° F) antifreeze
- Crankcase guard
- Engine oil change system, high speed, Wiggins
- High ambient cooling – software
- Cat Production Measurement
OPERATOR ENVIRONMENT
- Cab precleaner
- LED warning strobe
- Window pull down visor
- Handrail mounted mirrors
ADDITIONAL EQUIPMENT
- Additional counterweight
- Front and rear roading fenders
- Fast fill fuel system (Shaw-Aero)
- Cold weather package: additional starter and 2 batteries, engine block heater 120V or 240V, heated fuel lines
OTHER OPTIONAL CONFIGURATIONS
- Aggregate Handler
- Block Handler
- Millyard
- Steel Mill