New 995 Wheel Loader for Sale

995 Wheel Loader

Engine Model

Cat® 3516E
Emissions

U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
Engine Power

1847 hp
Gross Power

1870 hp

Engine

Engine Model: Cat® 3516E
Emissions: U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
Engine Power: 1847 hp
Gross Power: 1870 hp
Net Power: 1739 hp
Net Power: 1696 hp
Bore: 6.7 in
Stroke: 8.5 in
Displacement: 4766 in³
Peak Torque: 8549 lb/ft
Torque Rise: 39%
Note: The power ratings apply when tested under the reference conditions for the specified standard.
Note: The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
Note: The gross power advertised is with the fan at maximum speed.

Operating Specifications

Operating Weight: 543772 lb
Operating Weight: 547675 lb
Rated Payload: 60 ton (US)
Rated Payload: 50 ton (US)
Rated Payload: 55 ton (US)
Rated Payload: 50 ton (US)
Note: *Please contact your local dealer to determine if your application is suitable for this increased rated payload.
Cat Truck Match: 785/789
Cat Truck Match: 789/793/794
Bucket Capacity Range: 17.2-43.6 m3 (22.3-57 yd3)

Transmission

Transmission Type: Cat Planetary Power Shift
Forward: 4.6 mile/h
Forward: 8 mile/h
Forward: 13.6 mile/h
Reverse: 5 mile/h
Reverse: 8.8 mile/h
Reverse: 14.9 mile/h
Direct Drive: Lock-up disables
Direct Drive: 8.7 mile/h
Direct Drive: 15.2 mile/h
Direct Drive: Lock-up disables
Direct Drive: 9.6 mile/h
Direct Drive: 16.8 mile/h
Note: Travel speeds based on 58/85-57 tires.

Hydraulic System - Lift/Tilt

Lift: Positive Flow Control
Lift: Variable Displacement Piston
Maximum Flow at 1: 541 gal/min
Relief Valve Setting: 5004 psi
Cylinders: 370 × 1713 mm (14.6 × 67.4 in)
Cylinders: 310 × 1086 mm (12.2 × 42.8 in)
Pilot System: Open Loop and Pressure Reducing

Hydraulic Cycle Times

Rack Back: 4.9 s
Raise: 12.6 s
Dump: 3.1 s
Lower Float Down: 4.2 s
Total Hydraulic Cycle Time: 23.5 s

Complete System Fill

Fuel Tank: 856 gal (US)
Fuel Tank: 1414 gal (US)
Cooling System: 138 gal (US)
Engine Crankcase: 76 gal (US)
Transmission: 110 gal (US)
Differential: 220 gal (US)
Differential: 200 gal (US)
Hydraulic Tank: 270 gal (US)
Hydraulic Tank: 100 gal (US)
Oil Renewal System: 20 gal (US)
Note: *Not available on Tier 4 Final/Stage V machines. Not available in all regions.

Axles

Front: Fixed
Rear: Trunnion
Oscillation Angle: 9°

Brakes

Brakes: ISO 3450:2011

Cooling System

Ambient Capability Hydraulically Driven Demand Fan: 109.4 °F
Ambient Capability Hydraulically Driven Demand Fan: 131 °F
Ambient Capability Hydraulically Driven Demand Fan: 127.4 °F

Sound Performance - Standard

Operator Sound Level: 74 dB(A)
Machine Sound Level: 119 dB(A)
Note: The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c

Sound Performance - Suppression

Operator Sound Level: 73 dB(A)
Machine Sound Level: 117 dB(A)
Note: The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c

Hydraulic System - Steering

Steering System: Pilot, Load Sensing
Steering System: Piston, Variable Displacement
Maximum Flow at 1: 233 gal/min
Relief Valve Setting: 4496 psi
Total Steering Angle: 80 degrees
Steering Cycle Times: 7.6 s
Steering Cycle Times: 4.3 s

Dimensions - Standard Lift - Approximate

B: 28.8 ft
Clearance at Maximum Lift: 19.8 ft
Dump Angle at Maximum Lift: –50.0 degrees
Front Axle Centerline to Bucket Tip: 21.9 ft
Ground to Bumper Clearance: 4.4 ft
Ground to Center of Axles: 6 ft
Ground to Lower Hitch Clearance: 2.9 ft
Ground to Top of Exhaust Stacks: 23.2 ft
Ground to Top of Hood: 18.6 ft
Ground to Top of ROPS: 23.4 ft
Maximum Overall Height: 39.3 ft
Maximum Overall Length: 64.6 ft
Note: Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
Rack Angle at Maximum Lift: 59.5 degrees
Rack Back Angle: 47.7 degrees
Rack Back Angle: 39.7 degrees
Reach: 9.6 ft
Rear Axle: 20.4 ft
Tread Width: 14.1 ft
Wheel Base: 22.3 ft
Width: 18.8 ft

Dimensions - High Lift - Approximate

B: 31.6 ft
Clearance at Maximum Lift: 22.6 ft
Dump Angle at Maximum Lift: –50.0 degrees
Front Axle Centerline to Bucket Tip: 24.2 ft
Ground to Bumper Clearance: 4.4 ft
Ground to Center of Axles: 6 ft
Ground to Lower Hitch Clearance: 2.9 ft
Ground to Top of Exhaust Stacks: 23.2 ft
Ground to Top of Hood: 18.6 ft
Ground to Top of ROPS: 23.4 ft
Maximum Overall Height: 42.1 ft
Maximum Overall Length: 66.9 ft
Note: Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
Rack Angle at Maximum Lift: 59.4 degrees
Rack Back Angle: 53.5 degrees
Rack Back Angle: 45 degrees
Reach: 9.4 ft
Rear Axle: 20.4 ft
Tread Width: 14.1 ft
Wheel Base: 22.3 ft
Width: 18.8 ft

POWER TRAIN
- Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI^™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
- Engine prelube
- Fuel priming pump (electric)
- Ground-level engine shutoff
- Engine air intake (above hood) precleaner
- Aluminum Modular Radiator (AMR)
- Automatic, ether starting aid
- Electronic throttle lock
- Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
- Rimpull control system
- Planetary powershift, 3F/3R electronic control transmission
- Delayed engine shutdown
- Oil-cooled, multi-disc, service brakes
- Electro-hydraulic parking brake
LINKAGE
- Standard lift
ELECTRICAL
- Alternator
- Batteries, low maintenance
- 10/15 amp, 24V to 12V converter
- Disconnect switch to bumper
- LED warning lights (pattern selectable)
- LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
- Emergency jump-start receptacle
- Starter and transmission lockout in bumper
- 24V starting and charging system
- Electric starters
OPERATOR ENVIRONMENT
- Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
- Bonded glass, tinted
- Trainer seat
- Dual-lever lift and tilt function controls
- Implement kickouts
- Air conditioner
- Cab pressure indicator
- Graphical touchscreen information display conveys real-time operating information
- Heater, defroster, auto temperature controls
- Powered cab precleaner
- Operator presence status
- Starting/charging system malfunction
- Electronic OMM
- Operator controls help
- Two USB charging ports
- CB mounting, 12V/24V power and antenna
- 14-pin service port
- 12V power
- Selectable application profiles
- Entertainment radio mute
- Push-To-Start (PTS)
- Warning/indicator instrumentation
- Keypad control with indicator lights
- Dome light in cab
- Lunchbox and beverage holders
- Electro-hydraulic force feedback steering
- Vital Information Management System (VIMS^™) with information display: external data port, cycle timer
- Coat hook
- Gauge instrumentation with configurable widgets:
  – Status indicators
  
  – Wheel rev counter
  
  – Simplified payload
  
  – Tire pressure monitoring system (optional)
  
  – Bucket angle
  
  – Coolant temperature
  
  – Hydraulic oil temperature
  
  – Fuel level
  
  – Power train oil temperature
  
  – Engine speed (tachometer)
  
  – Transmission gear
  
  – Ground speed
  
  – Engine hour meter
SAFETY
- Ground-access ladders
- Rear-vision camera
- Front frame access with steps
- Front walkway around cab
- Pump bay access ladders with T-handle and platform
- Tie-offs on ROPS and radiator guards
- Steering frame lock
- Stairways on both sides of the machine
- LED stairway and access lights
- Toe kicks
- Electric (field and shop) horns
- Retractable seatbelt, 76 mm (3 in) wide
- Trainer seat with lap belt, 76 mm (3 in) wide
- Back-up alarm
- Secondary steering
MACHINE CONTROL AND GUIDANCE
- MineStar^™ Health ready
- MineStar GUIDE ready
- MineStar Edge ready
FUEL TANK
- 12 hour (3240 L/856 gal)
COOLING
- Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
GROUND-LEVEL SERVICE CENTER
- Service center light
- Implement and cooling fan oil level indicator
- Steering and brake oil level indicator
- Window washer solvent level indicator
- Transmission oil level indicator
- DEF level indicator (if equipped)
- Fuel level indicator
- Engine oil level indicator
- Engine coolant level indicator
- Automatic lubrication system grease tank level indicator
- DEF purge indicator lamp
- Transmission lockout and LED
- Starter lockout and LED
- Heavy-duty battery disconnect switch
- Stairway light switch
- Service lighting switch (if equipped)
- Fuel shutoff engine shutdown switch
- Engine oil fast-fill port
- Transmission oil fast-fill port
- Steering and brake hydraulic oil fast-fill port
- Steering and brake hydraulic oil drain port
- Oil renewal system fast-fill port (if equipped)
- Engine coolant fast-fill port
- DEF fill port (HRC only)
- Implement and cooling fan hydraulic oil fast-fill port
- Implement and cooling hydraulic oil drain port
- Automatic lubrication system grease tank fill port
- 24V jump-start receptacle
- 240V jacket water and engine oil heater plug (if equipped)
- 12V power port
- VIMS key switch
- 14-pin machine data port
SERVICE
- EH steering eliminates need for neutralizer adjustment
- In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
- High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
- Pump efficiency monitoring
- Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
- Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
- Rock guards on linkage grease lines
- Cat O-ring face seal couplings
- Lockable service access doors
- Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
- High-speed engine oil change system
- Ground-level fast-fill fuel system
- Transmission guard
- Drawbar hitch with pin
- Cat XT^™ hoses
- Left-side service center
- Oil sampling valves
- Automatic Autolube filling shutoff valve
- Telematics and Cat Electronic Technician service port in bumper
- Air filter remaining useful life sensor
- Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
- Rear access to cab and service platform
- Load-sensing steering
- Supplemental steering system
- Vandalism protection caplocks
- Cooling cleanout service package
- VIMS download and Cat Electronic Technician service port in bumper
- Service lights (engine bay, service center)
- EH steering eliminates need for neutralizer adjustment
EFFICIENCY
- On demand throttle, HP Plus, and Enhanced ECO Modes
- Variable displacement implement pumps
- Variable displacement load sensing steering
- Variable displacement cooling fan pump
- Torque converter lock-up clutch

POWER TRAIN
- Oil Renewal System (ORS)* (for increased time between oil changes)
LINKAGE
- High lift
OPERATOR ENVIRONMENT
- Rubber-mounted, high-impact resistant solar control glass
- Trainer seat with suspension
- Joystick lift and tilt function controls
- Bluetooth^®-enabled machine security
- Sun screen, pull down (front and rear)
- AM/FM/AUX radio
- AM/FM/AUX/USB/BT/CD/SAT radio
SAFETY
- Powered ground-access stairs
- Cat Detect (Rear Object Detection)
- Wheel chocks
COLD WEATHER
- Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
- Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
- 240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
- Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
- Heated mirrors (recommended for below-freezing temperatures)
MACHINE CONTROL AND GUIDANCE
- Cat Payload with Overload Prevention
- New Autodig Components:
  – Tire slip prevention
  
  – Lift stall prevention
  
  – Tire set
- Operator coaching
FUEL TANK
- 24 hour (5350 L/1414 gal)
COOLING
- High ambient package (recommended for site conditions that do not exceed 53° C [127° F])
RIMS AND TIRES
- Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
- Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
- Tires – 58/85-57 84PR L4 (require 47" rims)
SPARE RIMS
- 1194 mm (47") 152 mm (44 × 57) (6") flange
- 1194 mm (47") 127 mm (47 × 57) (5") flange
SERVICE
- Product Link^™ satellite
- Product Link cellular
- Product Link (dual mode – satellite/cellular)
- Additional service lights (pump bay, front frame and bumper)
SOUND
- Sound-suppression package