Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Medium Wheel Loaders

950G Series II Wheel Loader

  • Engine Model
    Caterpillar 3126B with ATAAC
  • Flywheel Power
    183 HP
  • Maximum Flywheel Power
    196 HP
  • Peak Torque
    669 ft-lb
Engine
Engine Model
Caterpillar 3126B with ATAAC
Flywheel Power
183 HP
Maximum Flywheel Power
196 HP
Peak Torque
669 ft-lb
Total Torque Rise
53 %
Bore
4.3 in
Stroke
5 in
Displacement
439 in³
Weights
Operating Weight
39198 lb
Buckets
Bucket Capacities
2.7-3.5 m3 3.5-4.5 yd3
Maximum Bucket Capacity
4.5 yd³
Operating Specifications
Static Tipping Load
23411 lb
Breakout Force
34666 lb
Transmission
Forward
4.3 mile/h
Forward
7.9 mile/h
Forward
13.9 mile/h
Forward
23 mile/h
Reverse
4.7 mile/h
Reverse
8.6 mile/h
Reverse
15.2 mile/h
Reverse
24.9 mile/h
Hydraulic System
Bucket
3000 psi
Hydraulic Cycle Time
6.5 s
Hydraulic Cycle Time
2.7 s
Hydraulic Cycle Time
11 s
Pilot System
8.9 gal/min
Pilot System
375 psi
Pilot System
500 psi
Loader Hydraulic System
Hydraulic Cycle Time
1.8 s
Brakes
Brakes
Meets required standards.
Axles
Front
Fixed front
Rear
Oscillating +/-13?
Maximum Single
18.5 in
Tires
Tires
Choose from a variety of tires to match your application.
Cab
ROPS
Meets SAE and ISO standards.
Service Refill Capacities
Fuel Tank
75.3 gal (US)
Cooling System
14.5 gal (US)
Crankcase
8 gal (US)
Transmission
9 gal (US)
Differential
9.5 gal (US)
Differential
9.5 gal (US)
Hydraulic System
40 gal (US)
Hydraulic Tank
23 gal (US)
  • Electrical
    • Alarm, back-up
    • Alternator (70-amp, brushless)
    • Batteries, maintenance-free (2) 950CCA
    • Ignition key, start/stop switch
    • Lighting system, halogen (6 total)
    • Main disconnect switch
    • Starter, electric, heavy-duty
    • Starting and charging system (24-volt)
  • Operator Environment
    • Bucket/Work Tool function lockout
    • Cab, pressurized and sound suppressed
    • Cigar lighter and ashtray
    • Coat hooks (2) with straps
    • Computerized Monitoring System
    • Controls, lift and tilt function
    • Heater and defroster
    • Horn, electric (steering wheel mounted)
    • Lunchbox, beverage holders, personal tray
    • Mirrors, rearview (internally mounted)
    • Seat, KAB (cloth) mechanical suspension
    • Seatbelt, retractable, 76 mm (3 in) wide
    • Steering column, adjustable, tilt (telescope on CCS)
    • Wet-arm, wipers/washers (front and rear)
    • Window, sliding (left and right side)
  • Power Train
    • Brakes, full hydraulic enclosed wet-disc
    • Engine, Cat 3126B diesel with ATAAC
    • Fan, radiator, hydraulically driven, variable speed
    • Filters, fuel/engine air, primary/secondary
    • Fuel priming pump (electric)
    • Fuel/water separator
    • Muffler, sound suppressed
    • Precleaner, engine air intake
    • Radiator, unit core (6 fins per inch) with ATAAC
    • Starting aid (air inlet heater)
    • Switch, transmission neutralizer lockout
    • Torque converter (free wheel stator)
    • Transmission, automatic planetary power shift (4F/4R)
    • Variable Shift Control (VSC)
  • Other Standard Equipment
    • Automatic bucket positioner
    • Counterweight
    • Doors, service access (locking)
    • Ecology drains (engine, transmission and hydraulic oil)
    • Fenders, steel front and rear
    • Hitch, drawbar with pin
    • Hood, non-metallic power tilting
    • Kickout, lift and tilt (CCS only), automatic
    • Linkage, Z-bar, cast crosstube/tilt lever
    • Product Link Ready
    • Sampling valves (engine, transmission, and hydraulic oil)
    • Sight Gauges:
    • Vandalism protection caplocks
  • Hydraulics
    • Couplings, Caterpillar O-ring face seals
    • Diagnostic pressure taps
    • Hoses, Cat XT™
    • Hydraulic oil cooler (swing-out)
    • Steering, load sensing
  • Antifreeze
    • Premixed 50% concentration of Extended Life Coolant with freeze protection to -34° C (-29° F).
  • Differentials. limited slip (front or rear), No-SPIN
    • (rear axle only)
Forks: 1524 mm (60 in) Pallet Forks
Forks: 1220 mm (48 in) Pallet Forks
Forks: 1220 mm (48 in) Hydraulic Forks
Forks: 1070 mm (42 in) Pallet Forks
Forks: 1219 mm (48 in) Pallet Fork Tine
Forks: 1525 mm (60 in) Pallet Fork Tine
Forks: 1219 mm (48 in) Pallet Fork Tine
Forks: 2184mm (86in) Millyard Pole Fork
Forks: 1219 mm (48 in) Pallet Fork Tine
Forks: 1067 mm (42 in) Pallet Fork Tine
Forks: 2776mm (109in) Millyard Fork
Forks: 2419mm (96in) Millyard Fork
Forks: 2776mm (109in) Millyard Fork
Forks: 2802mm (110in) Logging Fork
Forks: 2286mm (90in) Millyard Fork
Forks: 2738mm (108in) Logging Fork
Forks: 2479mm (98in) Logging Fork
Forks: 2419mm (96in) Logging Fork
Forks: 1524mm (60in) Log & Lumber Fork; Fusion™
Forks: 2298mm (90in) Logging Forks
Forks: 1219mm (48in) Log & Lumber Fork; Fusion™; 96″ carriage