New 930M Ag Handler Small Wheel Loader for Sale

930M Ag Handler Small Wheel Loader

Maximum Gross Power

168 hp
Engine Model

Cat® C7.1
Maximum Gross Power

162 HP
Maximum Gross Power

160 HP

Engine

Maximum Gross Power: 168 hp
Engine Model: Cat® C7.1
Maximum Gross Power: 162 HP
Maximum Gross Power: 160 HP
Maximum Gross Power: 1600 r/min
Rated Net Power: 158 HP
Rated Net Power: 154 HP
Rated Net Power: 141 HP
Displacement: 428 in³
Emissions: Engine meets U.S. EPA Tier 4 Final emission standards.
Maximum Gross Power: 170 hp
Maximum Gross Power: 168 hp
Maximum Gross Power: 1800 r/min
Maximum Gross Torque: 601 ft·lbf
Note: *The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
Note: **Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note: Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Net Power: 156 hp
Maximum Gross Power: 1600 r/min
Net Power: 158 hp
Maximum Gross Power: 160 hp
Maximum Gross Power: 162 hp
Stroke: 5.3 in
Maximum Net Torque: 797 N·m
Note: No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Bore: 4.1 in
Net Power: 156 hp
Stroke: 5.3 in
Net Power: 166 hp
Net Power: 164 hp
Bore: 4.1 in
Maximum Net Torque: 587 ft·lbf
Maximum Gross Torque: 795 N·m
Maximum Net Torque: 776 N·m
Net Power: 163 hp
Displacement: 428 in³
Maximum Net Torque: 573 ft·lbf
Maximum Rated Gross Power: 168 hp
Maximum Rated Gross Power: 170 mhp
Displacement: 427 in³
Maximum Gross Torque: 592 ft·lbf
Maximum Net Torque: 572 ft·lbf
Maximum Net Torque: 572 ft·lbf
Maximum Net Torque: 566 ft·lbf
Maximum Net Torque: 566 ft·lbf
Rated Net Power: 162 HP
Rated Net Power: 157 HP
Rated Net Power: 143 HP

Buckets

Bucket Capacities: 2.1-5.0 m³ (2.7-6.5 yd³)
Bucket Capacities: 3.1-5.0 m³ (4.0-6.5 yd³)

Weights

Operating Weight: 31382 lb

Cab

ROPS: ISO 3471:2008
FOPS: ISO 3449:2005 Level II
Note: *The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab
Note: *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Declared Sound Levels: 101 dB(A)
Declared Sound Levels: 68 dB(A)

Axles

Front: Fixed; Locking differential (standard)
Rear: Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

Dimensions and Operating Specifications (Approximate) - 3.1 m³ (4.1 yd³) Bucket

Articulation Angle: 40 degrees
Breakout: 18808 lb
Carry Height: 2 ft
Clearance: 10.42 ft
Clearance: 13.33 ft
Clearance: 11.58 ft
Departure Angle: 33 degrees
Dig Depth: 5.3 in
Dump Angle at Full Lift: 44 degrees
Height: 14.42 ft
Height: 2.17 ft
Height: 1.25 ft
Height: 12.08 ft
Height: 10.92 ft
Height: 18.67 ft
Length: 4.92 ft
Length: 27.25 ft
Length: 6.5 ft
Length: 9.83 ft
Note: *Vary with bucket.
Note: **Vary with tire.
Note: Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
Operating Weight: 31876 lb
Rack Angle at Carry: 48 degrees
Rack Angle at Full Lift: 51 degrees
Reach: 4.42 ft
Tipping Load: 13934 lb
Tipping Load: 16430 lb
Turning Radius: 9.33 ft
Turning Radius: 17.67 ft
Turning Radius: 20.92 ft
Width: 9 ft
Width: 8.33 ft
Width: 6.25 ft

Dimensions and Operating Specifications (Approximate) - 3.5 m³ (4.6 yd³) Bucket

Articulation Angle: 40 degrees
Breakout: 17246 lb
Carry Height: 2 ft
Clearance: 10.17 ft
Clearance: 13.33 ft
Clearance: 11.58 ft
Departure Angle: 33 degrees
Dig Depth: 5.3 in
Dump Angle at Full Lift: 44 degrees
Height: 14.42 ft
Height: 2.17 ft
Height: 1.25 ft
Height: 12.08 ft
Height: 10.92 ft
Height: 19 ft
Length: 4.92 ft
Length: 27.58 ft
Length: 6.5 ft
Length: 9.83 ft
Note: *Vary with bucket.
Note: **Vary with tire.
Note: Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
Operating Weight: 32136 lb
Rack Angle at Carry: 48 degrees
Rack Angle at Full Lift: 51 degrees
Reach: 4.67 ft
Tipping Load: 13592 lb
Tipping Load: 16070 lb
Turning Radius: 9.33 ft
Turning Radius: 17.67 ft
Turning Radius: 21.92 ft
Width: 9 ft
Width: 8.33 ft
Width: 6.25 ft

Transmission

Reverse: 8 mile/h
Forward and Reverse: 1-13 km/h (0.6-8 mph)
Forward and Reverse: 8 mile/h
Forward and Reverse: 17 mile/h
Forward and Reverse: 25 mile/h
Note: Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintaine
Forward: 8 mile/h
Forward: 1-13 km/h (0.6-8 mph)
Reverse: 25 mile/h
Reverse: 8 mile/h
Forward: 17 mile/h
Forward: 25 mile/h
Reverse: 17 mile/h

Steering

Steering Cycle Times: 2.4 s
Maximum Flow: 34 gal/min
Maximum Steering Torque: 37155 ft·lbf
Maximum Steering Torque: 27747 ft·lbf
Maximum Working Pressure: 3500 psi
Number of Steering Wheel Turns: 3.5 turns
Steering Articulation Angle: 40°
Steering Cycle Times: 2.4 s
Note: Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cylinder: 2.8 in
Steering Cylinder: 17.2 in
Note: Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Steering Cycle Times: 2.8 s
Steering Cylinder: 1.6 in

Loader Hydraulic System

Hydraulic Cycle Time: 1.4 s
Hydraulic Cycle Time: 1.8 s
Hydraulic Cycle Time: 4.3 s
Hydraulic Cycle Time: 7.5 s
Hydraulic Cycle Time: 1.6 s
Hydraulic Cycle Time: 1.8 s
Hydraulic Cycle Time: 4.8 s
Hydraulic Cycle Time: 8.2 s
Maximum Flow: 50 gal/min
Maximum Flow: 50 gal/min
Maximum Flow: 42 gal/min
Maximum Working Pressure: 4061 psi
Note: *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.
Relief Pressure: 4351 psi
Relief Pressure: 4061 psi
Relief Pressure: 4061 psi
Cycle Times: 10.1 s
Note: Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Cycle Times: 1.5 s
Cycle Times: 9.3 s
Cycle Times: 2.7 s
Cycle Times: 5.1 s
Cycle Times: 2.7 s
Relief Pressure: 4061 psi
Cycle Times: 1.7 s
Relief Pressure: 4351 psi
Note: Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Cycle Times: 5.7 s
Maximum Flow: 50 gal/min
Lift Cylinder: 4.3 in
Tilt Cylinder: 21.9 in
Tilt Cylinder: 2.8 in
Lift Cylinder: 2.4 in
Tilt Cylinder: 5.1 in
Lift Cylinder: 28.7 in

Service Refill Capacities

Axles: 6.9 gal (US)
Axles: 6.6 gal (US)
Cooling System: 7.9 gal (US)
Diesel Exhaust Fluid: 5 gal (US)
Engine Crankcase: 5.3 gal (US)
Fuel Tank: 51.5 gal (US)
Hydraulic System: 43.6 gal (US)
Hydraulic Tank: 23.8 gal (US)
Note: DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Transmission: 2.2 gal (US)

Tires

Note: Other tire choices are available. Contact your Cat dealer for details.
Note: Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note: Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other Choices Include: 20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX
Standard Size: 20.5 R25, radial (L-3)

Power Train

Note: *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph).
Rear Axle: Oscillating
Note: Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Front Axle: Fixed
Front Axle: Locking differential standard
Rear Axle: ± 10.5 degrees
Brakes: Inboard wet disc
Rear Axle: Limited slip differential optional
Brakes: Spring applied hydraulically released
Rear Axle: ± 7 degrees

Air Conditioning System

Air Conditioning: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Dimensions with Bucket - Standard Lift

Height: 1.3 ft
Rack Angle at Carry: 43 °
Departure Angle: 33 °
Length: 9.8 ft
Length: 6.5 ft
Turning Radius: 19.5 ft
Carry Height: 1.3 ft
Width: 8.3 ft
Note: **Vary with tire.
Dig Depth: 3.9 in
Turning Radius: 17.7 ft
Clearance: 11.75 ft
Clearance: 9.1 ft
Rack Angle at Full Lift: 54 °
Height: 17.1 ft
Width: 8.4 ft
Height: 2.25 ft
Height: 12.8 ft
Operating Weight: 31125 lb
Width: 6.3 ft
Turning Radius: 9.4 ft
Reach: 3.6 ft
Length: 24.9 ft
Clearance: 10.9 ft
Length: 4.9 ft
Height: 12.2 ft
Articulation Angle: 40 °
Height: 10.9 ft
Note: Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Note: *Vary with bucket.
Dump Angle at Full Lift: 48 °

Dimensions with Bucket - High Lift

Length: 6.5 ft
Departure Angle: 33 °
Height: 18.7 ft
Reach: 4.4 ft
Dump Angle at Full Lift: 48 °
Width: 8.4 ft
Length: 9.8 ft
Width: 6.3 ft
Length: 4.9 ft
Height: 2.25 ft
Note: *Vary with bucket.
Clearance: 10.7 ft
Height: 14.4 ft
Height: 12.2 ft
Carry Height: 1.9 ft
Clearance: 11.6 ft
Turning Radius: 17.7 ft
Turning Radius: 20.6 ft
Rack Angle at Full Lift: 51 °
Rack Angle at Carry: 47 °
Length: 27 ft
Note: **Vary with tire.
Height: 10.9 ft
Turning Radius: 9.4 ft
Clearance: 13.4 ft
Width: 8.3 ft
Note: Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Dig Depth: 5.3 in
Articulation Angle: 40 °
Operating Weight: 31441 lb
Height: 1.3 ft

Operating Specifications

Full Turn Tip Load: 19424 lb

Sustainability

Recyclability: 94%

POWER TRAIN
- Auto idle shut down feature
- Cat C7.1 engine
  - Power modes (Standard and Performance)
  - Power by range (High Power in Range 4)
  - Turbocharged and aftercooled
  - Diesel particulate filter (Fit for Life)
- Coded start (requires secondary display)
- Differential lock in front axle
- Enclosed wet disc full hydraulic brakes
- Oil sampling ports
- Hydraulically driven demand cooling fan
- Hydrostatic transmission with electronic control
  - Operator modes (Default, TC, Hystat^™, and Ice)
  - Directional Shift Aggressiveness (fast, medium, slow)
  - Rimpull control, adjust wheel torque
  - Creeper control, adjust ground speed
- Axle Duo-Cone^™ seal guards
- Parking brake, electric
- Single plane cooling package wide six fins per inch density
- Throttle lock and max speed limiter
HYDRAULICS
- Automatic lift lower and tilt kickouts, adjustable in-cab
- Bucket and fork modes, adjustable in-cab
- Cylinder damping at kickout and mechanical end stops
- Fine mode control (fast, medium, slow)
- Hydraulic response setting (fast, medium, slow)
- Load sensing hydraulics and steering
- Load sensing hydraulics and steering
ELECTRICAL
- Alternator, 115 amp, heavy duty
- Batteries, 1,000 CCA (2) 24V system, disconnect switch
- Back-up alarm
- Halogen work and roading lights, LED rear tail lights
- Product Link^™ PRO with three year subscription
- Remote jump start post
- Resettable main and critical function breakers
OPERATOR ENVIRONMENT
- Cab, pressurized
- 75 mm (3 in) retractable seat belt, with audible alarm and indicator
- Automatic temperature control
- External heated mirrors with lower parabolic
- Hydraulic control lockout
- Ground level cab door release
- Suspension seat, fabric
- Lunch box storage
- Radio ready speakers
- Rear window defrost, electric
- Mirror, single
- Column mounted multi function control – lights, wipers, turn signal
- Tilt and telescopic steering wheel
- Tinted front glass
- Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
- Camera, rear view
OTHER STANDARD EQUIPMENT
- Cat optimized Z-bar linkage with parallel lift
- Large-access enclosure doors with adjustable close/open force
- Recovery hitch, with pin
- Remote mounted lubrication points
- Lockable compartments and enclosures

OPTIONAL EQUIPMENT
- Auto lube, integrated in secondary display
- Auxiliary flow, third and fourth function
- Beacon light, strobe
- Cab, deluxe (standard in Europe)
  - Camera, rear view integrated into advanced display
  - Electrically adjustable external heated mirrors (2)
  - Secondary display to enable features and adjust parameters
  - LED interior lighting
  - Sunscreen, front and rear
  - Touchscreen secondary display
  - Ride control adjustable speed activation
  - Preventative maintenance reminders
  - Integrated help function (26 languages)
- Camera, roof mounted, front view with separate display
- Cat Production Measurement weigh scale system integrated into secondary display
- Cold start package
  - Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
- Coupler, (Fusion and ISO 23727)
- Fenders (extended cover and full coverage)
- Differential, limited slip, rear
- Guarding packages
- Lights, auxiliary, halogen or LED with engine and DEF compartment lights
- Linkage, high lift
- Payload Technology
  - Cat Production Measurement (CPM)
  - CPM Printer
- Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
- Radio packages
- Ride Control System, adjustable through secondary display
- Seats
  - Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
  - Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
- Steering
  - Dual mode and secondary
- Tire Pressure Monitoring (TPM)
- Counterweight, additional options
- Debris packages (low, medium, high)
- Rear Object Detection