Small Wheel Loaders
930M Small Wheel Loader
-
Maximum Gross Power168 hp
-
Engine ModelCat® C7.1 ACERT™
-
Rated Net Power157 HP
-
Maximum Rated Gross Power164 HP
Engine
- Maximum Gross Power
- 168 hp
- Engine Model
- Cat® C7.1 ACERT™
- Rated Net Power
- 157 HP
- Maximum Rated Gross Power
- 164 HP
- Maximum Rated Gross Power
- 166 HP
- Maximum Rated Gross Power
- 1800 r/min
- Maximum Rated Gross Power
- 164 HP
- Maximum Rated Gross Power
- 166 HP
- Rated Net Power
- 163 hp
- Rated Net Power
- 160 HP
- Maximum Gross Power
- 168 hp
- Maximum Gross Power
- 170 mhp
- Engine Model
- Cat C7.1**
- Maximum Gross Torque
- 601 ft·lbf
- Maximum Gross Torque
- 586 ft·lbf
- Maximum Net Torque
- 588 ft·lbf
- Maximum Net Torque
- 573 ft·lbf
- Note
- Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
- Note
- *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
- Note
- **The Cat C7.1 engine meets Tier 4 Final/Stage V off-highway emission standards.
- Rated Net Power
- 158 mhp
- Rated Net Power
- 156 hp
- Rated Net Power
- 166 mhp
- Displacement
- 427 in³
- Maximum Gross Power
- 160 hp
- Displacement
- 427 in³
- Maximum Gross Power
- 162 mhp
- Maximum Net Torque
- 587 ft·lbf
- Rated Net Power
- 164 hp
- Maximum Net Torque
- 572 ft·lbf
- Rated Net Power
- 156 hp
- Bore
- 4 in
- Bore
- 4 in
- Stroke
- 5 in
- Stroke
- 5 in
- Displacement
- 427 in3
- Displacement
- 427 in³
- Rated Net Power at 1
- 162 hp
- Maximum Gross Torque
- 592 lbf-ft
- Maximum Net Torque
- 566 lbf-ft
- Maximum Net Torque
- 572 lbf-ft
- Maximum Rated Gross Power
- 1600 rpm
- Maximum Rated Gross Power
- 160 hp
- Rated Net Power at 1
- 156 hp
- Rated Net Power at 1
- 158 hp
- Maximum Gross Torque
- 592 lbf-ft
- Maximum Net Torque
- 566 lbf-ft
- Maximum Net Torque
- 572 lbf-ft
- Emissions
- Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
- Note
- * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
- Emissions
- Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
- Maximum Net Torque
- 572 lb/ft
- Maximum Net Torque
- 572 lb/ft
- Maximum Rated Gross Power
- 162 HP
- Maximum Rated Gross Power
- 160 HP
- Maximum Rated Gross Power
- 1600 r/min
- Note
- Spark arrestor performance as standard – Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
- Rated Net Power
- 156 HP
Buckets
- Bucket Capacities
- 2.1-5.0 m3 (2.7-6.5 yd3)
- Bucket Capacities
- 2.1-5.0 m3 (2.7-6.5 yd3)
- Bucket Capacities
- 3.1-5.0 m³ (4.0-6.5 yd³)
- Bucket Capacities
- 2.1-2.7 m³ (2.7-3.5 yd³)
- Bucket Capacities
- 2.1-2.7 m3 (2.7-3.5 yd3)
- Bucket Capacities
- 3.1-5.0 m3 (4.0-6.5 yd3)
Weights
- Operating Weight
- 30879 lb
- Operating Weight
- 31382 lb
Tires
- Standard Size
- 20.5 R25, radial (L-3)
- Other Choices Include
- 20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3)
- Other Choices Also Include
- 20.5-25 16PR (L-5); 600/65 R25 radial (L-3); Skidder/Agriculture; Flexports Gen II
- Note
- Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
- Note
- Other tire choices are available. Contact your Cat dealer for details.
- Note
- In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
- Other Choices Include
- 20.5 R25, radial (L-2); 20.5 R25, radial (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 16PR (L-5); 600/65 R25 radial (L-3); Skidder/Agriculture; Solid Tires
- Standard Size
- 20.5 R25, radial (L-3)
Axles
- Front
- Fixed; Locking differential (standard)
- Rear
- Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
- Rear
- Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
- Front
- Fixed; Locking differential (standard)
Cab
- ROPS
- SAE J1040 MAY94, ISO 3471-1994.
- ROPS
- ISO 3471:2008
- FOPS
- SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
- FOPS
- ISO 3449:2005 Level II
- Note
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Note
-
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are:
– Standard cab: 68 ±3 dB(A)
– Deluxe cab: 66 ±2 dB(A) - Note
- *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Steering
- Steering Cylinder
- 2.8 in
- Steering Cylinder
- 1.6 in
- Steering Cylinder
- 17.2 in
- Maximum Flow
- 34 gal/min
- Maximum Working Pressure
- 3500 psi
- Maximum Steering Torque
- 37155 lbf-ft
- Maximum Steering Torque
- 27747 lbf-ft
- Steering Cycle Times
- 2.8 seconds
- Steering Cycle Times
- 2.4 seconds
- Maximum Flow
- 34 gal/min
- Maximum Steering Torque
- 37155 ft·lbf
- Maximum Steering Torque
- 27747 ft·lbf
- Maximum Working Pressure
- 3500 psi
- Note
- Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
- Note
- Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
- Steering Cycle Times
- 2.4 s
- Steering Cycle Times
- 2.8 s
- Steering Cylinder
- 2.8 in
- Steering Cylinder
- 1.6 in
- Steering Cylinder
- 17.2 in
- Steering Cycle Times
- 2.4 s
- Number of Steering Wheel Turns
- 3.5 turns
- Steering Articulation Angle
- 40°
Loader Hydraulic System
- Maximum Flow
- 50 gal/min
- Maximum Flow
- 50 gal/min
- Maximum Flow
- 42 gal/min
- Maximum Working Pressure
- 3626 psi
- Relief Pressure
- 4061 psi
- Relief Pressure
- 3626 psi
- Relief Pressure
- 4061 psi
- Lift Cylinder
- 4.7 in
- Lift Cylinder
- 2.6 in
- Lift Cylinder
- 28.7 in
- Tilt Cylinder
- 5.9 in
- Tilt Cylinder
- 3.5 in
- Tilt Cylinder
- 21.9 in
- Cycle Times
- 5.1/5.7 seconds
- Cycle Times
- 1.5/1.7 seconds
- Cycle Times
- 2.7/2.7 seconds
- Cycle Times
- 9.3/10.1 seconds
- Note
- * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
- Cycle Times
- 1.5/1.7 seconds
- Cycle Times
- 2.7/2.7 seconds
- Cycle Times
- 5.1/5.7 seconds
- Cycle Times
- 9.3/10.1 seconds
- Lift Cylinder
- 4.7 in
- Lift Cylinder
- 2.6 in
- Lift Cylinder
- 28.7 in
- Maximum Flow
- 50 gal/min
- Maximum Flow
- 50 gal/min
- Maximum Flow
- 42 gal/min
- Maximum Working Pressure
- 3771 psi
- Note
- *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
- Note
- Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
- Note
- Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
- Relief Pressure
- 4061 psi
- Relief Pressure
- 3771 psi
- Relief Pressure
- 4061 psi
- Tilt Cylinder
- 5.9 in
- Tilt Cylinder
- 3.5 in
- Tilt Cylinder
- 21.9 in
- Hydraulic Cycle Time
- 2.7 s
- Hydraulic Cycle Time
- 5.7 s
- Hydraulic Cycle Time
- 1.5 s
- Hydraulic Cycle Time
- 5.1 s
- Hydraulic Cycle Time
- 2.7 s
- Hydraulic Cycle Time
- 10.1 s
- Hydraulic Cycle Time
- 1.7 s
- Hydraulic Cycle Time
- 9.3 s
- Maximum Flow
- 50 gal/min
Service Refill Capacities
- Fuel Tank
- 51.5 gal
- Cooling System
- 7.9 gal
- Engine Crankcase
- 5.3 gal
- Transmission
- 2.2 gal
- Front Axles
- 6.9 gal
- Rear Axles
- 6.6 gal
- Hydraulic System
- 43.6 gal
- Hydraulic Tank
- 23.8 gal
- Diesel Exhaust Fluid
- 5.0 gal
- Cooling System
- 7.9 gal (US)
- Diesel Exhaust Fluid
- 5 gal (US)
- Engine Crankcase
- 5.3 gal (US)
- Front Axles
- 6.9 gal (US)
- Fuel Tank
- 51.5 gal (US)
- Hydraulic System
- 43.6 gal (US)
- Hydraulic Tank
- 23.8 gal (US)
- Rear Axles
- 6.6 gal (US)
- Transmission
- 2.2 gal (US)
- Note
- DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Transmission
- Forward and Reverse
- 1-13 km/h (0.6-8 mph)
- Forward and Reverse
- 8 mph
- Forward and Reverse
- 17 mph
- Forward and Reverse
- 25 mph
- Note
- * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1.
- Note
- Factory default is 7 km/h (4.4 mph).
- Forward and Reverse
- 1-13 km/h (0.6-8 mph)
- Forward and Reverse
- 8 mile/h
- Forward and Reverse
- 17 mile/h
- Forward and Reverse
- 25 mile/h
- Note
- *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
Operating Specifications
- Full Turn Tip Load
- 18670 lb
- Full Turn Tip Load
- 18670 lb
Power Train
- Front Axle
- Fixed
- Front Axle
- Locking differential
- Rear Axle
- Oscillating
- Rear Axle
- ± 10.5 degrees
- Rear Axle
- ± 7 degrees
- Rear Axle
- Limited slip differential
- Brakes
- Inboard wet disc
- Brakes
- Spring applied hydraulically released
- Brakes
- Spring applied hydraulically released
- Brakes
- Inboard wet disc
- Front Axle
- Fixed
- Front Axle
- Locking differential
- Note
- Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
- Note
- Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
- Rear Axle
- Oscillating
- Rear Axle
- ± 10.5 degrees
- Rear Axle
- ± 7 degrees
- Rear Axle
- Limited slip differential
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Sound
- Note
- European Union Directive “2000/14/EC”
- Operator Sound Pressure
- 72 dB(A)
- Average Exterior Sound Pressure
- 101 dB(A)
Sustainability
- Recyclability
- 94%
-
POWER TRAIN
- Axle Duo-Cone™ seal guards
- Auto idle shut down feature
- Cat C7.1 engine
– Power modes (Standard and Performance)
– Power by range (High Power in Range 4)
– Turbocharged and aftercooled
– Diesel particulate filter (Fit for Life) - Coded start (requires secondary display)
- Differential lock in front axle
- Enclosed wet disc full hydraulic brakes
- Hydraulically driven demand cooling fan
- Hydrostatic transmission with electronic control
– Operator modes (Default, TC, Hystat, and Ice)
– Directional Shift Aggressiveness (fast, medium, slow)
– Rimpull control, adjust wheel torque
– Creeper control, adjust ground speed - Parking brake, electric
- Single plane cooling package wide six fins per inch density
- Oil sampling ports
- Throttle lock and max speed limiter
-
HYDRAULICS
- Automatic lift lower and tilt kickouts, adjustable in-cab
- Bucket and fork modes, adjustable in-cab
- Cylinder damping at kickout and mechanical end stops
- Fine mode control (fast, medium, slow)
- Hydraulic response setting (fast, medium, slow)
- Load sensing hydraulics and steering
- Seat-mounted hydraulic joystick controls
-
ELECTRICAL
- Alternator, 115 amp, heavy duty
- Batteries, 1,000 CCA (2) 24V system, disconnect switch
- Back-up alarm
- Emergency shutdown switch
- Halogen work and roading lights, LED rear tail lights
- Product Link™ PRO with three year subscription
- Remote jump start post
- Resettable main and critical function breakers
-
OPERATOR ENVIRONMENT
- 75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator
- Automatic temperature control
- Cab, pressurized
- Camera, rearview, with dedicated display
- External heated mirrors with lower parabolic
- Ground level cab door release
- Hydraulic control lockout
- Mirror, single
- Lunch box storage
- Radio ready speakers
- Rear window defrost, electric
- Column mounted multi function control – lights, wipers, turn signal
- Tilt and telescopic steering wheel
- Tinted front glass
- Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
- Suspension seat, fabric
-
OTHER STANDARD EQUIPMENT
- Large-access enclosure doors with adjustable close/open force
- Cat optimized Z-bar linkage with parallel lift
- Recovery hitch, with pin
- Remote mounted lubrication points
- Lockable compartments and enclosures
-
OPTIONAL EQUIPMENT
- Autolube, integrated in secondary display
- Auxiliary flow, third and fourth function
- Differential, limited slip, rear
- Beacon light, strobe
- Cab, deluxe (standard in Europe)
– Camera, rearview integrated into advanced display
– Electrically adjustable external heated mirrors (2)
– Secondary display to enable features and adjust parameters
– LED interior lighting
– Sunscreen, front and rear
– Touchscreen secondary display
– Ride control adjustable speed activation
– Preventative maintenance reminders
– Integrated help function (26 languages) - Camera, roof mounted, front view with separate display
- Cold start package
– Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total) - Counterweight, additional options
- Coupler (Fusion and ISO 23727)
- Debris packages (low, medium, high)
- Fenders (extended cover and full coverage)
- Guarding packages
- Linkage, high lift
- Lights, auxiliary, halogen or LED with engine and DEF compartment lights
- Payload Technology
– Cat Production Measurement (CPM)
– CPM Printer - Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
- Radio packages
- Rear Object Detection
- Ride Control System, adjustable through secondary display
- Seats
– Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
– Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest. - Steering
– Dual mode and secondary - Tire Pressure Monitoring (TPM)
Buckets - Loader: 3.4m³ (4.5yd³) Material Handling Bucket for Wheel Loaders 
Buckets - Loader: 14.5 m³ (19 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 17.2 m³ (22.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14 m³ (18.25 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14 m³ (18.25 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14.5 m³ (19 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 11.9 m³ (15.5 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 11.9 m³ (15.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 4.2 m3 (5.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge -
$59,500
2021 Cat 272D3XE
-
$193,000
2022 Cat 315-07
-
2022 Cat D8T
-
$98,500
2019 Cat D3K2LGP
-
2022 Cat D8T
-
Browse All Used Equipment Inventory
View More