New AD30 Underground Mining Truck for Sale

AD30 Underground Mining Truck

Engine Model

Cat® C15 ACERT™
Engine Model

Cat® C15
Gross Power

409 HP
Emissions

401 HP

Engine

Engine Model: Cat® C15 ACERT™
Engine Model: Cat® C15
Gross Power: 409 HP
Emissions: 401 HP
Engine Power: 401 hp
Gross Power: 409 hp
Emissions: 401 HP
Engine Power: 401 hp
Bore: 5.4 in
Net Power: 377.0 hp
Stroke: 6.8 in
Gross Power: 409 HP
Gross Power: 409 HP
Displacement: 928 in³
Note: Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Bore: 5.4 in
Note: All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specific
Stroke: 6.8 in
Note: Engine derate will commence at an altitude of 2743 m (8,999 ft).
Displacement: 928.0 in3
Note: Optional Ventilation Reduction package available.
Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available.
Note: Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.
Rated Power: 1800 r/min
Gross Power: 409 HP

Operating Specifications

Nominal Payload Capacity: 66139 lb
Gross Machine Mass: 132300 lb
Gross Machine Mass: 132300 lb
Body Capacities: 11.3-17.5 m³ (14.8-22.9 yd³)

Weights

Empty: 63647 lb
Empty: 42944 lb
Empty: 20704 lb
Loaded: 132277 lb
Front Axle: 42944 lb
Rear Axle: 20704 lb
Loaded: 58451 lb
Front Axle: 58451 lb
Rear Axle: 73826 lb
Loaded: 73826 lb

Weight Distribution

Empty: 67.50%
Empty: 32.50%
Loaded: 44.20%
Loaded: 55.80%
Front Axle: 67.5 %
Rear Axle: 32.5 %
Front Axle: 44.2 %
Rear Axle: 55.8 %

Transmission

Forward 1: 4.2 mph
Forward: 3.9 mile/h
Forward 2: 7.6 mph
Forward: 7 mile/h
Forward 3: 13.9 mph
Forward: 12.9 mile/h
Forward 4: 25.4 mph
Forward: 22.8 mile/h
Reverse 1: 4.8 mph
Reverse: 4.4 mile/h
Note: Maximum travel speeds with standard 26.5 × R25 tires.

Final Drives

Differential Ratio: 3.38:1
Differential Ratio: 3.38:1
Final Drive Ratio: 4.76:1
Total Reduction Ratio: 16.13:1
Total Reduction Ratio: 16.13:1
Note: Fully floating axles.

Body Hoist

Raise: 10.5 s
Lower: 11.2 s
Total Cycle Time: 21.7 s

Body Capacities

Body 1: 14.8 yd³
Body 2: 18.8 yd3
Body 2: 18.8 yd³
Body 3: 22.9 yd³
Wide Body: 21.9 yd³
Ejector Body: 19.9 yd³
Ejector Body: 21.9 yd³
Note: Heaped SAE 2:1.

Turning Dimensions

Outside Clearance Radius: 337.4 in
Inner Clearance Radius: 198 in
Axle Oscillation: 10 °
Articulation Angle: 42.5 °
Frame Oscillation: 10 Degrees

Dimensions

Tunnel Clearance Height: 157.5 in
Height to Top of Load: 123.3 in
Loading Height: 93.9 in
Overall Height: 220.5 in
Height to Top of ROPS: 102.4 in
Overall Length: 4000.0 in
Wheelbase: 204.7 in
Ground Clearance: 15.7 in
Dump Clearance: 22.0 in
Rear Wheel to Body Raised: 41.8 in
Rear Axle to Tail: 63.3 in
Max Overall Length: 423.0 in
Centerline of Front Axle to Centerline of Hitch: 70.9 in
Front Axle to Front Bumper: 131.7 in
Height to Top of Body: 100.3 in
Overall Tire Width: 104.3 in

ROPS

ROPS Standards: ROPS (Roll Over Protection Structure) for cab offered by Caterpillar meets ISO 3471, SAE J1040, AS2294.2, EN13510 ROPS Criteria.
ROPS Standards: ROPS (Roll Over Protection Structure) for cab offered by Caterpillar meets ISO 3471, SAE J1040, AS2294.2, EN13510 ROPS Criteria.
FOPS Standards: FOPS (Falling Objects Protection Structure) meets ISO 3449, SAE J231, AS2294.3, EN13627 FOPS Criteria.
FOPS Standards: FOPS (Falling Objects Protection Structure) meets ISO 3449, SAE J231, AS2294.3, EN13627 FOPS Criteria.

Service Refill Capacities

Engine Crankcase: 9 gal (US)
Transmission: 18.0 gal
Transmission: 18 gal (US)
Hydraulic Tank: 87.0 gal
Hydraulic Tank: 38 gal (US)
Cooling System: 20.0 gal
Cooling System: 20 gal (US)
Front Differential and Final Drives: 15 gal (US)
Rear Differential and Final Drives: 15 gal (US)
Fuel Tank: 132.0 gal
Fuel Tank: 108 gal (US)

Tires

Tire Size: 26.5 × R25

Standards

Standards: ROPS/FOPS Certified Cab

Brakes

Standards: ISO3450, AS2958.1, CAN-CSA424.30-M90

Weights (Other Engine Models)

Operating Mass: 42944 lb
Operating Mass: 132277 lb
Operating Mass: 73826 lb
Operating Mass: 63647 lb
Operating Mass: 58451 lb
Operating Mass: 20704 lb

TIRES, RIMS, AND WHEELS
- Tires must be selected from the Mandatory Attachments section. Choose from below:
  – Tire, 26.5 × 25 VSNT Bridgestone
  – Tire, 26.5 × 25 VSDL Bridgestone
- Rims (set of four) – five pieces, tubeless
ELECTRICAL
- 12V power supply in cab
- Alarm, reversing
- Alternator, 95 amp
- Battery disconnect switch, ground level
- Circuit breaker, 80-amp
- Corrosive protection spray
- Diagnostic connector
- Disconnect switch, two post, ground level
- Lights:
  – Headlights with dimmer switch
  – Brake and tail lights
  – Reversing lights, automatic when reverse gear selected
  – Work light, rear, cab mounted
- Low maintenance batteries
- Receptacle group, auxiliary start
- Shutdown switch, ground level
- Starting and charging system
OPERATOR ENVIRONMENT
- Cab, ROPS/FOPS certified
- Open operator station ROPS/FOPS structure
- Caterpillar Electronic Monitoring System (CEMS), dash instrument panels
- Operator Presence System
- Automatic Brake Application (ABA)
- Electric horns
- Gauges:
  – Engine coolant temperature
  – Transmission coolant temperature
  – Hydraulic oil temperature
  – Fuel level
  – Speedometer
  – Tachometer
- Indicator lights:
  – Alert warning light
  – Body up position warning
  – High beam
  – Residual brake pressure warning
  – Retarder application
  – Turn signal
- Low hydraulic level warning
- Mirrors, rear view
- Seat, suspension operator seat with retractable seat belt
- Seat, trainer/passenger with seat belt
- Steering wheel, tilt/telescopic
POWER TRAIN
- Axle, arrangement:
  – Standard width, front – rear
- Brake retarder control, automatic
- Brakes:
  – All wheel disc
  – Oil cooled
  – Multiple-disc (SAFR^™)
- Control throttle shifting
- Electric fuel priming pump
- Engine:
  – Cat C15 six cylinder diesel engine
  – Air-to-air aftercooler (ATAAC)
- Exhaust, turbo compartment shielding
- Four wheel drive
- Gear blockout with tray up, programmable
- Ground speed limiting, programmable
- Long life coolant
- Parking brakes, four wheels
- Precleaner, engine air intake
- Radiator, cross flow; Radiator cap manual release
- Secondary steering system
- Transmission, automatic planetary power shift (4F/1R)
- Torque converter with automatic lockup
OTHER STANDARD EQUIPMENT
- Adapters, oil sample
- Alarm, tray up
- Body dump and ejector:
  – Dump, (14.4 m3/18.8 yd3)
- Cap, radiator, manual release
- Catalytic exhaust purifier/muffler group
- Centralized lubrication points
- Fenders:
  – Front, rear flaps
- Firewall
- Fuel system manual shut off tap
- Front rubber bumpers
- Handholds (access on/off top deck)
- Handrails
- Hitch, articulated and oscillated
- Lifting lugs, frame
- Lubrication system:
  – Centralized, dump body
- Operation and Maintenance Manual – English and other applicable local languages to select
- Scheduled Oil Sampling (S·O·SSM) port:
  – Coolant
  – Engine oil
  – Hydraulic oil
  – Transmission oil
- Spill guard, front, for body
- Swing out radiator grill
- Tow pin, front and rear

POWER TRAIN
- Axle, arrangement:
  – Wide body, front – rear
- Brake pressure gauges
- Engine options:
  – Engine, Ventilation Reduction (VR)
  – Equivalent to Tier 3
- After treatment options (for use with VR engine only) Diesel Particulate Filter (DPF) (flow through) filter
- Fast Fill System:
  – Coolant
  – Engine oil
  – Fuel (dual tanks)
  – Hydraulic oil
  – Transmission oil
- Park Brake Switch Engagement – Push to Apply/Pull to Apply
ELECTRICAL
- Battery shutdown:
  – Ground Level Isolation, In Cab Isolation Switch
  – Ground Level Isolation, Engine Shutdown Switch
  – Ground Level Isolation, In Cab Isolation, Engine Shutdown Switch
- Lights:
  – Headlights with dimmer switch, LED
  – Reversing lights, automatic when reverse gear selected, LED
  – Work light, rear, cab mounted, LED
OPERATOR ENVIRONMENT
- Operator’s station ROPS/FOPS enclosed:
  – Air conditioning
  – Cab pressurizer and filter
  – Dome light
  – Heater
  – Radio ready compartment for radio and speakers
  – Sun visor
  – Window, sliding cab door
- Seat:
  – Suspension seat Cat Comfort TLV2, vinyl
  – Suspension seat tee, mechanical
- Seat cover:
  – Tee and Cat Comfort TLV2
  – Seat cover, companion
TECHNOLOGY
- Vital Information Management System (VIMS) Gen 3
- Payload:
  – Truck Payload Measurement System (TPMS)
TIRES, RIMS, AND WHEELS
- Rim identification numbering
- Spare rim, tubeless
OTHER OPTIONAL EQUIPMENT
- Body dump and ejector:
  – Dump, (11.3 m3/14.8 yd3)
  – Dump, (16.8 m3/21.9 yd3) (wide body configuration)
  – Dump, (17.5 m3/22.9 yd3)
  – Ejector, (15.2 m3/19.9 yd3)
  – Ejector, (16.8 m3/21.9 yd3)
- Body liners, impact and/or wear
- Camera – color rear facing
- Cover, anti vandalism for shipping
- Fenders:
  – Wide body, front, rear flaps
- Fire suppression system:
  – Foam, water based
- Fluids:
  – Arctic fuel
  – Arctic coolant
- Lubrication system:
  – Automatic, dump or ejector body
  – Centralized, ejector body
- Mine transfer
- Reflective tapes
- Service tools