Auxiliary Engines
C4.4 (Electronic Control System)
Engine Specifications
- Rated Engine Speed
- 1500 / 1800 rpm
- Bore
- 4.13 in
- Stroke
- 5 in
- Displacement
- 268 in³
- Aspiration
- Turbocharged - Aftercooled and turbo only aspiration (Turbocharged aspiration only for 65ekW (71bkW))
- Governor
- Electronic (A5 ECM)
- Configuration
- In-line 4, 4-stroke-cycle diesel
- Refill Capacity
- Lube Oil System w/Oil filter change: 11 L 2.8 gal)
- Oil Change Interval
- 500 hours
- Cooling
- Heat exchanger, combined circuit keel cooling, or separate circuit keel cooling
- Rotation from Flywheel End
- Counterclockwise
- Emissions
- U.S. EPA Tier 3, EU Stage V, China II
- Flywheel Housing
- SAE No. 03 with SAE 11.5 flywheel (126 teeth)
Dimensions & Weights
- Length
- 33.7 in
- Height
- 40.9 in
- Minimum Width
- 30.6 in
- Maximum Width
- 32 in
- Minimum Engine Dry Weight
- 1200 lb
- Maximum Engine Dry Weight
- 1278 lb
Power Rating
- Power Range
- 71 - 129 bkW
Generator Set Specifications
- Frequency
- 50 / 60
-
COOLING SYSTEM
- Gear-driven jacket-water and auxiliary water pumps
- Engine mounted air cleaner and expansion tank
- Integral plate-type oil cooler
-
EXHAUST SYSTEM
- Watercooled exhaust manifold and turbocharger
-
FUEL SYSTEM
- Common Rail fuel system
- Electric fuel priming pump
-
GENERAL
- Internal engine balancing shaft
- Self-tensioning multi-vee belt drive
-
LUBE SYSTEM
- Open crankcase ventilation system
-
MOUNTING SYSTEM
- Engine mounted fuel and oil filter
- Engine mounted customer interface and control relays
-
STARTING SYSTEM
- 12V or 24V starter motor
-
GENERAL
- MGGP 200 Gauge Panel and interface harness
- Engine shutdown sensors and shutdown controller
- Double wall high pressure fuel lines
- EMCP engine control panel
- Exhaust elbow and bellows
- Rear mounting feet
- Glow plugs
- Jacket water heater
- Jacket water connections (keel cooled)
- SOSSM sample points
- Glow plugs