Commercial Propulsion Engines
3516C
-
Power Range1650-3386 bhp (1230-2525 bkW)
-
Power Range2000-3385 bhp (1492-2525 bkW)
-
Continuous Ratings2000.0 bhp
-
Heavy Duty Ratings2100.0 bhp
Power Rating
- Power Range
- 1650-3386 bhp (1230-2525 bkW)
- Power Range
- 2000-3385 bhp (1492-2525 bkW)
- Continuous Ratings
- 2000.0 bhp
- Heavy Duty Ratings
- 2100.0 bhp
- Maximum Continuous Ratings
- 2200.0 bhp
Engine Specifications
- Speed Range
- 1200-1800 rpm
- Speed Range
- 1200-1800 rpm
- Emissions
- IMO II
- Emissions
- IMO II
- Aspiration
- TTA
- Aspiration
- TTA
- Bore
- 8.46 in
- Bore
- 8.46 in
- Stroke
- 7.48 in
- Stroke
- 7.48 in
- Displacement
- 4765 in3
- Displacement
- 4765 in³
- Rotation from Flywheel End
- Counterclockwise or Clockwise
- Configuration
- V 16, 4-Stroke-Cycle Diesel
Dimensions & Weights
- Minimum Dry Weight
- 17550.0 lb
- Minimum Dry Weight
- 17550 lb
- Minimum Length
- 143.1 in
- Minimum Height
- 77.4 in
- Minimum Width
- 80.2 in
- Minimum Width
- 80.2 in
- Maximum Length
- 148 in
- Maximum Height
- 84.6 in
- Maximum Width
- 84.3 in
- Minimum Length
- 143.1 in
- Minimum Height
- 77.4 in
-
Air Inlet System
- Corrosion resistant separate circuit freshwater aftercooled, powercore air cleaner
-
Control System
- Dual Caterpillar® A3 Electronic Control Unit (ECU) LH with electronic unit injector fuel system rigid wiring harness (10 amp DC power required to drive ECU)
-
Cooling System
- Gear-driven centrifugal auxiliary sea water pump, geardriven centrifugal jacket water pump, expansion tank for commercial engines, coolant shunt tank on lightweight engines, engine oil cooler, thermostats and housing.
-
ECU Functions
- Programmable low idle, SAEJ1939 data link, Cat® data link, engine diagnostics, general alarm relay, programmable parameters (system application and tattletales), Caterpillar ET service tool interface, remote shutdown, shutdown notify, load feedback, overspeed shutdown, overspeed verify
-
Exhaust System
- Dry gas-tight exhaust manifolds with heat shields, dual turbochargers with watercooled bearings and heat shield. Wastegate on select ratings
-
Fuel System
- Electronically controlled unit injectors, simplex fuel filter (RH) with service indicators, fuel transfer pump
-
Instrumentation
- Marine Power Display of: Engine oil pressure, engine water temperature, fuel pressure, engine speed, fuel consumption, overspeed shutdown notification light, prelube and shutdown override
-
Lube System
- Gear-driven pump, top-mounted dual crankcase breather groups, simplex oil filter, oil filler and dipstick
-
Power Take-Offs
- Accessory drive, two-sided front housing
-
Protection System
- Emergency stop pushbutton, safety shutoff, oil pressure, and water temperature
-
General
- Two lifting eyes mounted to cylinder heads, Caterpillar yellow paint, parts books and maintenance manuals, shrink-wrap.
-
ISO Certification
- Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities.
-
Air Inlet System
- Air Cleaner Removal
- Remote Air Inlet Adapters
-
Charging System
- Battery Chargers
- Charging Alternators
-
Control System
- Throttle Position Sensor
- Throttle Synchronization
-
Cooling System
- Water Level Switch Gauge
- Coolant Level Sensors
- Connections
- Keel Cooling Conversions
- Heat Exchangers
- Auxiliary Water Pumps
- Sea Water Pump Removal
- Coolant Shunt Tanks
- Air Separator
- Marine Gear Cooling
-
Exhaust System
- Exhaust Outlet
- Flexible Fittings
- Elbows
- Flanges
- Flange and Exhaust Expanders
- Mufflers
-
Fuel System
- Fuel Cooler
- Fuel Priming Pumps
- Flexible Fuel Lines
- Rigid Fuel Lines
- Primary Fuel Filter
- Fuel level switch
-
Instrumentation
- PL1000T Communication Module
- PL1000E Communication Module
- Customer Interface
- Thermocouples
- Remote Panel Display
- Remote Cylinder Temperature Display
- Pilot House Instrument Panels
- Marine Gear Sensors
- Engine Vision Display System
-
Lube System
- Oil Pan
- Oil Pan Accessories
- Sump Pumps
- Prelubrication Options
- Lubricating Oil
- CENTRIFUGAL OIL FILTER
-
Mounting System
- Engine Supports
- Vibration Isolation Mountings
-
Power Take-Offs
- Flexible Coupling and Guards
- Front Housing Accessories
- Upper Left Hand Front Location:
- Upper Right Hand Front Location:
- Upper Right Hand Rear Location:
- Lower Left Hand Front Location:
- Lower Left Hand Rear Location:
- Front Housing Accessory Drives
- Upper LH Accessory Drive
- Upper RH Accessory Drive
- Front Power Take Offs
- Crankshaft Pulleys
- Damper Guard Removals
-
Protection System
- Air Inlet Shutoffs
- Switches and Contactors
- Explosion Relief Valve
- Sensors
-
Spare Parts Kits
- Parts Kits
- Pump Kits
- Fuel Transfer
- Lube Oil
-
Special Appearance
- Chrome Plated Relief Valves
- Black Air Cleaners
-
Starting System
- Starting Motors or Barring Device
- Air Starting Motors Options
- Starting Aids
- Battery Sets - 24 Volt - Dry
- Battery Rack
-
General
- Tool Set
- Caterpillar Datalink Wire