Diesel Fire Pumps
Cat?� 3406C Fire Pump Engine
-
Minimum Power292.0 bhp
-
Maximum Power482 hp
-
Maximum Power482.0 bhp
-
Rated Speed1750-2300 rpm
Power Rating
- Minimum Power
- 292.0 bhp
- Maximum Power
- 482 hp
- Maximum Power
- 482.0 bhp
- Rated Speed
- 1750-2300 rpm
- Minimum Power
- 292 hp
- Rated Speed
- 1750-2300 rpm
Emission Standards
- Emissions
- Non-Certified. Available for global non-regulated areas. FM Approved, UL Listed
- Emissions
- Non-Certified. Available for global non-regulated areas. FM Approved, UL Listed
General
- Engine Configuration
- Inline 6, 4-Stroke-Cycle Diesel
- Bore
- 5.4 in
- Bore
- 137.2 mm (5.4 in)
- Stroke
- 6.5 in
- Displacement
- 893 in³
- Stroke
- 165.1 mm (6.5 in)
- Compression Ratio
- 14.5:1
- Aspiration
- Turbocharged Aftercooled
- Displacement
- 14.6 L (893 in³)
- Aspiration
- Turbocharged Aftercooled
- Rotation from Flywheel End
- Counterclockwise
- Compression Ratio
- 14.5:1
- Aftertreatment
- -
- Rotation
- Counterclockwise
- Cooling System
- 32.2 L (34 qt)
- Lube System
- 34.1 L (36 qt)
Engine Dimensions - Approximate
- Length
- 65.4 in
- Height
- 52.6 in
-
Air Inlet System
- Dry or watercooled manifold and turbocharger
-
Charging System
- Charging Alternator, 24 volt, 35 amp
-
Control System
- Hydra-mechanical governor
-
Cooling System
- Thermostats and housing
- Jacket water pump, gear driven, centrifugal
- Heat exchanger
- Expansion tank
- FM Required Raw Water Cooling Loops: 1.5" iron, horizontal or vertical, 1.5" 316 stainless steel, horizontal or vertical
- Optional Radiator, not UL listed or FM approved
-
Exhaust System
- Exhaust manifold, water-cooled (wet) or dry
- Exhaust elbow, dry, 152 mm (6 in), 4 bolt flange
-
Flywheels and Flywheel Housing
- SAE No. 1 flywheel
- SAE No. 1 flywheel housing
- SAE standard rotation
-
Fuel System
- Fuel filter, LH
- Fuel transfer pump
- Primary fuel filter / water separator
-
Instrumentation
- Instrument panel, LH
- Engine oil pressure gauge
- Fuel pressure gauge
- Water temperature gauge
- Service meter
-
Lube System
- Crankcase breather
- Oil cooler
- Lube oil filter
- Oil filler in valve cover and dipstick, both RH
- Rear sump oil pan
- Oil filler in valve cover
- Dipstick
-
Mounting System
- Supports
-
Power Take-Offs
- Flywheel stub shaft
-
Protection System
- Stop-Start System, automatic (compatible with NFPA 20 requirements, able to be energized from either of two battery sources and capable of manual starter actuation)
-
General
- Vibration damper and guard
- Lifting eyes
- Paint - fire pump red, optional radiator painted black