Gas Compression Electric Motors
CN3086 Electric Motor for Gas Compression
-
Voltage4000V & 4160V ± 10%/60 Hz
-
Type of EXClass 1 Division 2 Group A,B,C,D T3 (NEC or CEC)
-
Number of Poles8
-
Electric Motor TypeSquirrel Cage Induction Motor
Electric Motor Specifications
- Voltage
- 4000V & 4160V ± 10%/60 Hz
- Type of EX
- Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)
- Number of Poles
- 8
- Electric Motor Type
- Squirrel Cage Induction Motor
- Full Load Speed
- 892 r/min
- Mounting Designation
- F1 or F2
- Number of Poles
- 8
- Enclosure Type
- WP-II
- Insulation
- Class F
- Service Factor
- 1.15 SF (1.0 VFD)
- Standards
- NEMA MG1
- Maximum Ambient Temperature
- 104 °F
- Maximum Altitude
- 3300 ft
- Duty
- Continuous
- Temperature Rise
- Class B at rated load
- Connection of Stator Winding
- Star
- Full Load Current
- 390 Amps
- Locked Rotor Amps
- 490% Code E
- Locked Rotor Torque
- 50%
- No Load Current
- 108 Amps
- Rated Torque
- 17658 lb/ft
- Shaft
- 8.5 in
-
Bearings
- Bearing RTDs for temperature monitoring
- Insulated non-drive end bearings to reduce bearing currents
- Anti-friction on 1500 hp (optional)
-
Rotors
- Designed for minimal vibration
- Dynamic balancing at full operational speed
- Fabricated copper squirrel cages
- Forged, keyless shaft
- AISI 4140/DIN42CrMo4 shaft
-
Stators
- Radial air ducts ensure uniform and efficient cooling
- Vacuum pressure impregnated with specially formulated epoxy resin
- 2X RTDS per Phase
- Space heater
- Welded and machined stator core retains its rigidity throughout motor life to ensure a sealed and homogeneous insulation system that results in high dielectric strength, excellent heat transfer and the elimination of hazardous internal partial discharges
Buckets - Loader: 2.9m³ (3.75yd³) Material Handling Bucket for Wheel Loaders 
Buckets - Loader: 17.2 m³ (22.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14.5 m³ (19 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14.5 m³ (19 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14 m³ (18.25 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 11.9 m³ (15.5 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 11.9 m³ (15.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14 m³ (18.25 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Fusion™ Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 4.2 m3 (5.5 yd3) Fusion™ Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 4.2 m3 (5.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge