Gas Compression Electric Motors
CN5086 Electric Motor
-
Voltage4000V ± 10%/60 Hz
-
Type of EXClass 1 Division 2, Group A,B,C,D T3 (NEC or CEC)
-
Number of Poles8
-
Electric Motor TypeSquirrel Cage Induction Motor
Electric Motor Specifications
- Voltage
- 4000V ± 10%/60 Hz
- Type of EX
- Class 1 Division 2, Group A,B,C,D T3 (NEC or CEC)
- Number of Poles
- 8
- Electric Motor Type
- Squirrel Cage Induction Motor
- Full Load Speed
- 894 r/min
- Mounting Designation
- F1 or F2
- Number of Poles
- 8
- Enclosure Type
- WP-II
- Insulation
- Class F
- Service Factor
- 1.15 SF
- Standards
- NEMA MG1
- Max Ambient Temperature
- 104 °F
- Max Altitude Before Derate
- 3000 ft
- Duty
- Continuous
- Temperature Rise
- Class B at rated load
- Connection of Stator Winding
- Star
- Full Load Current
- 658 Amps
- Locked Rotor Amps
- 520% Code E
- Locked Rotor Torque
- 60%
- Breakdown Torque
- 190%
- No Load Current
- 200 Amps
- Rated Torque
- 29366 lb-ft
- Shaft
- 8.5 in
- Connection of Stator Winding
- Star
- Duty
- Continuous
- Enclosure Type
- WP-II
- Full Load Current
- 658 Amps
- Insulation
- Class F
- Locked Rotor Amps
- 520% Code E
- Locked Rotor Torque
- 60%
- Maximum Altitude
- 3000 ft
- Maximum Ambient Temperature
- 104 °F
- No Load Current
- 200 Amps
- Rated Torque
- 29366 lb/ft
- Shaft
- 8.5 in
- Standards
- NEMA MG1
- Temperature Rise
- Class B at rated load
-
Bearings
- Self-lubricated sleeve bearings
- Insulated non-drive end bearings to reduce bearing currents
- Bearing RTDs for temperature monitoring
-
Rotors
- Designed for minimal vibration
- Dynamic balancing at full operational speed
- Fabricated copper squirrel cages
- Oversized, forged, keyless shaft
- AISI 4140/DIN42CrMo4 shaft
-
Stators
- Radial air ducts ensure uniform and efficient cooling
- Vacuum pressure impregnated with specially formulated epoxy resin
- 2X RTDS per Phase
- Space heater
- Welded and machined stator core retains its rigidity throughout motor life to ensure a sealed and homogeneous insulation system that results in high dielectric strength, excellent heat transfer and the elimination of hazardous internal partial discharges
Buckets - Loader: 3.1m³ (4yd³) Material Handling Bucket for Wheel Loaders 
Buckets - Loader: 14.5 m³ (19 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 17.2 m³ (22.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14.5 m³ (19 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14 m³ (18.25 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14 m³ (18.25 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 11.9 m³ (15.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 11.9 m³ (15.5 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 4.2 m3 (5.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Fusion™ Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 4.2 m3 (5.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge