New G3306B Gas Compression Engine for Sale

G3306B Gas Compression Engine

Engine Specifications

Minimum Rating: 145.0 bhp
Maximum Rating: 211 BHP
Maximum Rating: 211.0 bhp
Emissions: NSPS 2010
Emissions: With Caterpillar or Customer supplied AFRC & Aftertreatment, 0.1g and 0.5g/bhp-hr NOx
Displacement: 638.0 in3
Minimum Rating: 145 BHP
Compression Ratio: 10.5:1
Compression Ratio: 10.5:1
Aspiration: Naturally Aspirated or Turbocharged-Aftercooled
Aspiration: Naturally Aspirated or Turbocharged - Aftercooled
Rotation: Counterclockwise
Rotation from Flywheel End: Counterclockwise
Flywheel and Flywheel Housing: SAE No. 1
Flywheel and Flywheel Housing: SAE No. 1
Flywheel Teeth: 156
Flywheel Teeth: 156
Displacement: 638 in³
Oil Change Interval: 750 hours
Oil Change Interval: 750 hours
Ignition: ADEM A4
Air: ADEM A4
Stroke: 6.0 in
Stroke: 6 in
Bore: 4.8 in
Bore: 4.8 in
Length: 60 in
Width: 38 in
Height: 50 in
Weight: 2090 lb

Capacity for Liquids

Air Inlet System
- Air cleaner — intermediate duty, dry
- Air cleaner rain cap (shipped loose)
- Service indicator
Control System
- ADEM A4
Cooling System
- Thermostats and housing — full open temperature 97°C (207°F)
- Jacket water pump — gear-driven, centrifugal, non-self-priming
Exhaust System
- Exhaust manifolds — watercooled
- Exhaust elbow — dry
- 102 mm (4 in)
- Three-way catalyst — 1.0 g NOx and 0.5 g NOx catalyst options
Flywheels & Flywheel Housings
- Flywheel, SAE No. 1
- Flywheel housing, SAE No. 1
- SAE standard rotation
Fuel System
- Air/fuel ratio control
- Gas pressure regulator
- Requires 10.3-34.5 kPa (1.5-5 psi) gas
- Natural gas carburetor
Ignition System
- ADEM A4 ignition
Lube System
- Crankcase breather, top mounted
- Oil cooler
- Oil filter
- Oil pan, full sump
- Oil filler and dipstick
Protection System
- The following parameters include alarm and shutdown

Charging Alternator
- 24V, 35A alternator
- 24V, 35A CSA alternator*
Cooling System
- Radiators
- Jacket water pump inlet adapter
Exhaust System
- Exhaust flex fitting — ANSI flange
- Exhaust elbow
- Exhaust flange — ANSI flange
Guards
- Fan guard
- Damper guard
Ignition System
- CSA certified electronics and ignition
Instrumentation
- Operator interface panel
- Operator interface panel enclosure
- 15', 20' and 50' interconnect harness
Starting System
- Air pressure regulator
- Air start silencer
- Vane starter
- Electric starter
- Turbine starter