Gas Compression Engines
G3508 Low Emission Gas Compression Engine
-
Minimum Rating524.0 bhp
-
Maximum Rating670 BHP
-
Maximum Rating670.0 bhp
-
EmissionsNSPS Site Compliant Capable or Non-regulated
Engine Specifications
- Minimum Rating
- 524.0 bhp
- Maximum Rating
- 670 BHP
- Maximum Rating
- 670.0 bhp
- Emissions
- NSPS Site Compliant Capable or Non-regulated
- Emissions
- With Customer supplied Aftertreatment, 2g/bhp-hr NOx
- Minimum Rating
- 524 BHP
- Displacement
- 2105 in³
- Ignition
- ADEM™ A3
- Air
- ADEM™ A3
- Length
- 96 in
- Width
- 70 in
- Height
- 76 in
- Weight
- 11950 lb
-
Air Inlet System
- Remote air inlet adapters
-
Charging System
- Battery chargers
-
Cooling System
- Jacket water thermostats and housing — full open temperature 98°C (208°F)
- Jacket water pump — gear driven, centrifugal, non-self-priming
- Aftercooler water pump — gear driven, centrifugal, non-self-priming
- Aftercooler core for sea-air atmosphere
- Aftercooler thermostats and housing — full open temperature 35°C (95°F)
- Aftercooler — raw water, cleanable
-
Exhaust System
- Exhaust manifolds — watercooled
-
Flywheels & Flywheel Housings
- SAE No. 00 flywheel
- SAE No. 00 flywheel housing
- SAE standard rotation
-
Fuel System
- Gas pressure regulator
- Natural gas carburetor
- Fuel gas shut-off valve (24V DC)
-
Instrumentation
- Advisor panel
- Advisor interconnect harness
-
Lubrication System
- Crankcase breathers — top mounted
- Oil cooler
- Oil filter — RH
- Oil pan — shallow
- Oil sampling valve
- Turbo oil accumulator
-
Mounting System
- Rails, engine mounting
-
Power Take-Offs
- Front housing — two-sided
- Front lower LH accessory drive
-
Protection System
- Electronic shutoff system
- Gas shutoff valve
-
General
- Paint — Cat yellow
- Vibration damper and guard
-
Air Inlet System
- Remote air inlet adapters
-
Charging System
- Battery chargers
-
Cooling System
- Aftercooler core
- Thermostatic valves
- Connections
- Expansion and overflow tank
- Water level switch gauge
-
European Certifications
- European Union certifications
-
Exhaust System
- Flexible fittings
- Elbows
- Flanges
- Flange and exhaust expanders
- Mufflers
-
Fuel System
- Fuel filter
-
Instrumentation
- Customer communication modules
-
Lubrication System
- Oil filters — duplex
- Oil pan drain
- Oil level regulator
- Sump pumps
- Lubricating oil
-
Mounting System
- Rails
- Vibration isolators
-
Power Take-Offs
- Auxiliary drive shaft
- Auxiliary drive pulleys
- Front stub shaft
- Pulleys
-
Protection System
- Gas valve
- Explosion relief valves
-
Starting System
- Air pressure regulator
- Air silencer
- JW heaters
- Battery sets (24-volt dry)
- Battery accessories
-
General
- Flywheel guard removal
- Engine barring group
- Premium 8:1 pistons
Buckets - Loader: 3.1m³ (4yd³) Material Handling Bucket for Wheel Loaders 
Buckets - Loader: 14.5 m³ (19 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 17.2 m³ (22.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14.5 m³ (19 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14 m³ (18.25 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14 m³ (18.25 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 11.9 m³ (15.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 11.9 m³ (15.5 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 4.2 m3 (5.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Fusion™ Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 4.2 m3 (5.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge