New Cat?� 3512 Industrial Diesel Engine for Sale

Cat^?� 3512 Industrial Diesel Engine

Minimum Power

1020.0 bhp
Maximum Power

1500 HP
Maximum Power

1500 hp
Maximum Power

1500.0 bhp

Power Rating

Minimum Power: 1020.0 bhp
Maximum Power: 1500 HP
Maximum Power: 1500 hp
Maximum Power: 1500.0 bhp
Maximum Torque: 4580 lb-ft @ 1400 rpm
Maximum Torque: 4580 lb-ft @ 1400 rpm
Rated Speed: 1200-1800 rpm
Rated Speed: 1200-1800 rpm
Minimum Power: 1020 HP
Minimum Power: 1020 hp
Rated Speed: 1200-1800 rpm

Emission Standards

Emissions: Non-certified
Emissions: Non-Certified
Emissions: Non-Certified

General

Engine Configuration: V-12, 4-Stroke-Cycle Diesel
Engine Configuration: V-12, 4-Stroke-Cycle Diesel
Engine Configuration: V-12, 4-Stroke-Cycle Diesel
Bore: 170 mm (6.7 in)
Bore: 170 mm (6.7 in)
Bore: 6.7 in
Bore: 6.7 in
Stroke: 7.5 in
Stroke: 7.5 in
Stroke: 190 mm (7.5 in)
Stroke: 190 mm (7.5 in)
Displacement: 3161 in³
Displacement: 3161 in³
Displacement: 51.8 L (3161 in³)
Aspiration: Turbocharged Aftercooled
Displacement: 51.8 L (3161 in³)
Compression Ratio: 13.0:1
Compression Ratio: 13.0:1
Compression Ratio: 13.0:1
Aspiration: Turbocharged Aftercooled
Aspiration: Turbocharged Aftercooled
Rotation: Counterclockwise
Rotation from Flywheel End: Counterclockwise
Rotation from Flywheel End: Counterclockwise
Aftertreatment: -
Aftertreatment: -
Lube System: 310.4 l (327.9 qt)
Lube System: 310.4 l (327.9 qt)

Engine Dimensions - Approximate

Length: 105 in
Length: 105 in
Width: 67 in
Width: 67 in
Height: 68 in
Height: 68 in
Weight: 13400 lb
Weight: 13400 lb
Height: 1720 mm (68 in)
Length: 2676 mm (105 in)
Weight: 6078 kg (13,400 lb)
Width: 1703 mm (67 in)

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

Length: 2676 mm (105 in)
Width: 1703 mm (67 in)
Height: 1720 mm (68 in)
Weight: 6078 kg (13,400 lb)

Air Inlet System
- Aftercooler core, corrosion resistant coated (air side)
- Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
- Turbocharger, rear mounted
- Jacket water aftercooled
Control System
- Governor, RH, 3161 with self contained synthetic oil sump
- Air-fuel ratio control
- Mechanical speed control, without torque control
- Governor control
- Positive locking
Cooling System
- Thermostats and housing
- Jacket water pump, centrifugal
Exhaust System
- Exhaust manifold, dry
Flywheels and Flywheel Housing
- SAE No. 00 flywheel
- 183 flywheel teeth
- SAE No. 00 flywheel housing
Fuel System
- Fuel filter, with service indicators, cartridge type with RH service
- Fuel transfer pump
Instrumentation
- Instrument Panel, RH
- Engine oil pressure gauge
- Fuel pressure gauge
- Oil filter differential gauge
- Jacket water temperature gauge
- Service meter, electric
- Tachometer
Lube System
- Crankcase breather, top mounted
- Oil cooler
- Oil filler
- Oil dipstick
- Oil pump
- Oil filter, cartridge type with RH service
- Shallow oil pan
- Fumes disposal (not installed)
Mounting System
- Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
Power Take Off
- Accessory drive, upper RH
- Front housing, single sided
Protection System
- Junction box
- Manual shutoff, RH
- Safety shutoff protection, energized to shutdown
- Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
- Water temperature
- Overspeed
- 3161 governor solenoid energized to shutdown
Starting System
- Starting switch
General
- Vibration damper
- Lifting eyes
- Paint: Caterpillar yellow, with optional colors available at request