Industrial
Cat?� C0.5 Diesel Engine
-
Minimum Power11.0 bhp
-
Maximum Power13.7 HP
-
Maximum Power13.7 hp
-
Maximum Power13.7 bhp
Power Rating
- Minimum Power
- 11.0 bhp
- Maximum Power
- 13.7 HP
- Maximum Power
- 13.7 hp
- Maximum Power
- 13.7 bhp
- Maximum Torque
- 22 lb-ft @ 2600 rpm
- Rated Speed
- 2800-3600 rpm
- Rated Speed
- 2800-3600 rpm
- Minimum Power
- 11 HP
- Minimum Power
- 11 hp
- Rated Speed
- 2800-3600 rpm
Emission Standards
- Emissions
- U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
- Emissions
- U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
- Emissions
- U.S. EPA Tier 4 Interim Equivalent
General
- Engine Configuration
- Inline 2, 4-Stroke-Cycle Diesel
- Engine Configuration
- Inline 2, 4-Stroke-Cycle Diesel
- Engine Configuration
- Inline 2, 4-Stroke-Cycle Diesel
- Bore
- 67 mm (2.64 in)
- Bore
- 67 mm (2.64 in)
- Bore
- 2.6 in
- Bore
- 2.6 in
- Stroke
- 2.8 in
- Stroke
- 2.8 in
- Stroke
- 72 mm (2.83 in)
- Stroke
- 72 mm (2.83 in)
- Displacement
- 31 in³
- Displacement
- 31 in³
- Displacement
- 0.5 L (31 in³)
- Aspiration
- Naturally Aspirated (NA)
- Displacement
- 0.5 L (31 in³)
- Compression Ratio
- 23.5:1
- Compression Ratio
- 23.5:1
- Compression Ratio
- 23.5:1
- Aspiration
- Naturally Aspirated (NA)
- Aspiration
- Naturally Aspirated (NA)
- Combustion System
- Indirect Injection
- Combustion System
- Indirect Injection
- Combustion System
- Indirect Injection
- Rotation
- Counterclockwise
- Rotation from Flywheel End
- Counterclockwise
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- -
- Aftertreatment
- -
- Lube System
- 1.61-2.01 L (1.70-2.12 qt)
- Lube System
- 1.61-2.01 L (1.70-2.12 qt)
Engine Dimensions - Approximate
- Length
- 16 in
- Length
- 16 in
- Width
- 14.6 in
- Width
- 14.6 in
- Height
- 20.6 in
- Height
- 20.6 in
- Weight
- 126 lb
- Weight
- 126 lb
- Height
- 523 mm (20.6 in)
- Length
- 407 mm (16 in)
- Weight
- 57 kg (126 lb)
- Width
- 371 mm (14.6 in)
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
- Length
- 407 mm (16 in)
- Width
- 371 mm (14.6 in)
- Height
- 523 mm (20.6 in)
- Weight
- 57 kg (126 lb)
-
Air Inlet System
- Inlet manifold with choice of inlets.
-
Control System
- Alternator 12 volt 14 amp
- Starter motor 12 volt
- Glow plug starting aid
-
Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
-
Flywheel and Flywheel Housing
- SAE No. 6 1/2 flywheel
- Choice of SAE No. 5 or standard backplate flywheel housing
-
Fuel System
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
-
Lube System
- Closed circuit breather
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
-
General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request