Industrial
Cat?� C1.1 Diesel Engine
-
Maximum Power24 hp
-
Maximum Torque63 lb-ft @ 1600 rpm
-
Rated Speed2800 rpm
-
Minimum Power19.3 hp
Power Rating
- Maximum Power
- 24 hp
- Maximum Torque
- 63 lb-ft @ 1600 rpm
- Rated Speed
- 2800 rpm
- Minimum Power
- 19.3 hp
Emission Standards
- Emissions
- U.S. EPA Tier 4 Final, EU Stage V
General
- Engine Configuration
- In-Line 3, 4-Stroke-Cycle Diesel
- Engine Configuration
- In-Line 3
- Bore
- 3 in
- Stroke
- 3.2 in
- Bore
- 77 mm (3.03 in)
- Displacement
- 69 in³
- Compression Ratio
- 23.0:1
- Stroke
- 81 mm (3.19 in)
- Aspiration
- Naturally Aspirated (NA)/Turbocharged (T)
- Combustion System
- Indirect Injection
- Displacement
- 1.13 L (69 in³)
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- -
- Cooling System Capacity
- 1.9 L (2 qt)
- Cooling System
- 1.9 L (2 qt)
- Lube System
- 3.4-4.4 L (3.6-4.6 qt)
- Lube System
- 3.4-4.4 L (3.6-4.6 qt)
Engine Dimensions - Approximate
- Length
- 19.3 in
- Width
- 15.8 in
- Height
- 22.7 in
- Weight
- 211 lb
- Height
- 576 mm (22.7 in)
- Length
- 491 mm (19.33 in)
- Weight
- 87 kg (191 lb)
- Width
- 400 mm (15.74 in)
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
- Length
- 491 mm (19.33 in)
- Width
- 400 mm (15.74 in)
- Height
- 576 mm (22.7 in)
- Weight
- 87 kg (191 lb)
-
Air Inlet System
- Inlet manifold with choice of inlets.
-
Control System
- Alternator 12 volt 65 amp
- Starter motor 12 volt
- Glow plug starting aid
-
Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
-
Flywheel and Flywheel Housing
- SAE No. 6 1/2 flywheel
- Choice of SAE No. 5 or standard backplate flywheel housing
- U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
-
Fuel System
- Fuel injection pump
- Spin-on fuel filter
-
Lube System
- Low profile oil pan
- Spin-on lube oil filter
- Lube oil pressure switch
-
Power Take Off (PTO)
- Provision for Power Take Off (PTO)
-
General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request