Industrial
Cat?� C1.1 Diesel Engine
-
Minimum Power18.4 bhp
-
Maximum Power28.2 HP
-
Maximum Power28.2 hp
-
Maximum Power28.2 bhp
Power Rating
- Minimum Power
- 18.4 bhp
- Maximum Power
- 28.2 HP
- Maximum Power
- 28.2 hp
- Maximum Power
- 28.2 bhp
- Maximum Torque
- 52 lb-ft @ 2300 rpm
- Maximum Torque
- 49.4 lb-ft @ 2400 rpm
- Rated Speed
- 2200-3400 rpm
- Rated Speed
- 2200-3400 rpm
- Minimum Power
- 19.7 HP
- Minimum Power
- 19.7 hp
- Rated Speed
- 2200-3400 rpm
Emission Standards
- Emissions
- U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
- Emissions
- U.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.
- Emissions
- U.S. EPA Tier 4 Interim Equivalent
General
- Engine Configuration
- Inline 3, 4-Stroke-Cycle Diesel
- Engine Configuration
- Inline 3, 4-Stroke-Cycle Diesel
- Engine Configuration
- Inline 3, 4-Stroke-Cycle Diesel
- Bore
- 77 mm (3.03 in)
- Bore
- 77 mm (3.0 in)
- Bore
- 3 in
- Bore
- 3 in
- Stroke
- 3.2 in
- Stroke
- 3.2 in
- Stroke
- 81 mm (3.19 in)
- Stroke
- 81 mm (3.2 in)
- Displacement
- 69 in³
- Displacement
- 69 in³
- Displacement
- 1.13 L (69 in³)
- Aspiration
- Naturally Aspirated (NA)
- Displacement
- 1.13 L (67 in³)
- Compression Ratio
- 23.0:1
- Compression Ratio
- 23.0:1
- Compression Ratio
- 23:1
- Aspiration
- Naturally Aspirated (NA)
- Aspiration
- Naturally Aspirated (NA)
- Combustion System
- Indirect Injection
- Combustion System
- Indirect Injection
- Combustion System
- Indirect Injection
- Rotation
- Counterclockwise
- Rotation from Flywheel End
- Counterclockwise
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- -
- Aftertreatment
- -
- Lube System
- 3.4-4.4 L (3.6-4.6 qt)
- Lube System
- 3.4-4.4 L (3.6-4.6 qt)
Engine Dimensions - Approximate
- Length
- 19.3 in
- Length
- 19.3 in
- Width
- 15.7 in
- Width
- 15.7 in
- Height
- 22.7 in
- Height
- 22.7 in
- Weight
- 191 lb
- Weight
- 191 lb
- Height
- 576 mm (22.7 in)
- Length
- 491 mm (19.3 in)
- Weight
- 87 kg (191 lb)
- Width
- 400 mm (15.7 in)
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
- Length
- 491 mm (19.33 in)
- Width
- 400 mm (15.7 in)
- Height
- 576 mm (22.7 in)
- Weight
- 87 kg (191 lb)
-
Air Inlet System
- Inlet manifold with choice of inlets.
-
Control System
- Alternator 12 volt 40 amp
- Starter motor 12 volt
- Glow plug starting aid
-
Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
-
Flywheel and Flywheel Housing
- SAE No. 6 1/2 flywheel
- Choice of SAE No. 5 or standard backplate flywheel housing
-
Fuel System
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
-
Lube System
- Low profile oil pan
- Spin-on lube oil filter
- Lube oil pressure switch
-
General
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Paint: Caterpillar yellow, with optional colors available at request