Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Industrial

Cat® C13 Industrial Power Unit

  • Minimum Power
    385.0 bhp
  • Maximum Power
    520 hp
  • Maximum Power
    520.0 bhp
  • Rated Speed
    1800-2100 rpm
Power Rating
Minimum Power
385.0 bhp
Maximum Power
520 hp
Maximum Power
520.0 bhp
Rated Speed
1800-2100 rpm
Minimum Power
385 hp
Rated Speed
1800-2100 rpm
Emission Standards
Emissions
U.S. EPA Tier 4 Final, EU Stage IV Nonroad Emission Standards. Designed to meet proposed EU Stage V Nonroad Emission Standards.
Emissions
U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 and Korea Tier 4 Final emissions standards
General
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
130 mm (5.12 in)
Bore
130 mm (5.12 in)
Bore
5.1 in
Stroke
6.2 in
Stroke
157 mm (6.18 in)
Stroke
157 mm (6.18 in)
Displacement
762.8 in³
Compression Ratio
17.0:1
Displacement
12.5 L (762.8 in³)
Displacement
12.5 L (762.8 in³)
Aspiration
Turbocharged Aftercooled (TA)
Aspiration
Turbocharged Aftercooled (TA)
Compression Ratio
17:1
Rotation from Flywheel End
Counterclockwise
Aftertreatment
DOC+DPF+SCR
Rotation
Counterclockwise
Cooling System Capacity
60.7 L (64.2 qt)
Cooling System
60.7 L (64.2 qt)
Lube System
34 L (35.9 qt)
Lube System
34 L (35.9 qt)
Power Unit Dimensions
Length
83.5 in
Width
49 in
Height
82 in
Weight
5080 lb
Power Unit Dimensions - Approximate
Length
2085-2122 mm (82.1-83.5 in)
Width
1157-1247 mm (45.6-49 in)
Height
1928-2082 mm (75.9-81.97 in)
Weight
2085-2304 kg (4596-5080 lb)
PETU Dimensions - Tier 4 Final Only
Length
33.6 in
Width
11.3 in
Height
21.7 in
Weight
42.8 lb
Volume Capacity
51.1 qt (US)
Cat Regeneration System Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)
Diameter
330.2 mm (13 in)
Width
779.8-1069 mm (30.7-42.1 in)
Height
451.3-654 mm (17.8-25.7 in)
Weight
248-259 kg (547-571 lb)
Cat Regeneration System Aftertreatment Dimensions - Approximate
Diameter
330.2 mm (13 in)
Height
451.3-654 mm (17.8-25.7 in)
Weight
248-259 kg (547-571 lb)
Width
779.8-1069 mm (30.7-42.1 in)
PETU Dimensions - Tier 4 Final, Stage IV Only
Volume Capacity
48.4 L (51.1 qt)
Length
854 mm (33.6 in)
Width
287 mm (11.3 in)
Height
551 mm (21.7 in)
Weight
19.42 mm (42.8 lb)
Passive Regeneration System Aftertreatment Dimensions - Approximate
Length
974.8 mm (38.4 in)
Width
958.3 mm (37.7 in)
Height
547.2 mm (21.5 in)
Weight
140 kg (308.6 lb)
  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
    • Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage V)
  • Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
    • Integrated Electronic Control Unit (ECU)
    • Remote fan control
  • Cooling System
    • Vertical or RH thermostat outlet
    • Centrifugal water pump
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels and Flywheel Housing
    • SAE No. 1 flywheel housing
    • Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage V).
  • Fuel System
    • MEUI injection
    • Primary fuel filter
    • Secondary fuel filters
    • Fuel transfer pump
    • Electronic fuel priming
  • Lube System
    • Open crankcase ventilation system
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Oil dipstick
    • Gear driven oil pump
    • Choice of front, rear or center sumps
    • Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage V)
  • Power Take Off (PTO)
    • SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
  • General
    • Paint: Cat yellow
  • U.S. EPA Tier 4 Final, EU Stage V Aftertreatment/ Clean Emissions Control Equipment
    • Cat Regeneration System
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • Aftertreatment Electronic Control Unit (ECU)
    • NOx Reduction System (NRS)
    • Pump Electronic Control Unit (PETU)
    • Selective Catalytic Reduction (SCR)
    • Available in 12V or 24V systems