Industrial
Cat?� C9.3B Diesel Engine
-
Maximum Power456 hp
-
Maximum Torque1540 lb-ft @ 1400 rpm
-
Rated Speed1800-2200 rpm
-
Minimum Power335 hp
Power Rating
- Maximum Power
- 456 hp
- Maximum Torque
- 1540 lb-ft @ 1400 rpm
- Rated Speed
- 1800-2200 rpm
- Minimum Power
- 335 hp
Emission Standards
- Emissions
- EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014, China NRIV
General
- Engine Configuration
- In-Line 6, 4-Stroke-Cycle Diesel
- Engine Configuration
- In-Line 6
- Bore
- 4.5 in
- Stroke
- 5.9 in
- Bore
- 115 mm (4.53 in)
- Displacement
- 567.5 in³
- Compression Ratio
- 17.0:1
- Stroke
- 149 mm (5.87 in)
- Aspiration
- Turbocharged-Aftercooled (TA)
- Combustion System
- Direct Injection
- Displacement
- 9.3 L (567.5 in³)
- Rotation from Flywheel End
- Counterclockwise
- Aftertreatment
- DOC+DPF+SCR
- Cooling System Capacity
- 22 L (23.6 qts)
- Cooling System
- 22 L (23.6 qts)
- Lube System
- 30 L (31.7 qts)
- Lube System
- 30 L (31.7 qts)
Engine Dimensions - Approximate
- Length
- 44 in
- Width
- 31 in
- Height
- 42 in
- Weight
- 1907 lb
- Height
- 1068 mm (42 in)
- Length
- 1125 mm (44.3 in)
- Weight
- 865 kg (1907 lb)
- Width
- 791 mm (31.1 in)
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
- Length
- 1125 mm (44.3 in)
- Width
- 791 mm (31.1 in)
- Height
- 1068 mm (42 in)
- Weight
- 865 kg (2480 lb)
Aftertreatment Dimensions
- Length
- 36 in
- Width
- 27 in
- Height
- 17 in
- Weight
- 211 lb
Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)
- Length
- 925 mm (36.4 in)
- Width
- 694 mm (27.3 in)
- Height
- 432 mm (17.0 in)
- Weight
- 140 kg (308 lb)
Aftertreatment Dimensions - Approximate
- Height
- 432 mm (17.0 in)
- Length
- 925 mm (36.4 in)
- Weight
- 96 kg (211 lb)
- Width
- 694 mm (27.3 in)
-
Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Mid-mount turbocharged system with front and rear exhaust configurations
-
Control System
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Integrated Electronic Control Unit (ECU)
- Remote fan control
-
Cooling System
- Vertical or RH thermostat outlet
- Centrifugal water pump
- Guidance on cooling system design available through your dealer to ensure equipment reliability
-
Flywheels and Flywheel Housing
- Available SAE 1 power take-off with optional SAE B, SAE C power take-off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Proposed Stage V)
-
Fuel System
- Electronic high pressure common rail
- Primary fuel filter
- Secondary and tertiary fuel filters
- Fuel transfer pump
- Electronic fuel priming
-
Lube System
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Oil dipstick
- Gear driven oil pump
- Choice of front, rear or center sumps
- Open crankcase ventilation system with fumes disposal (optional OCV filter system)
-
Power Take Off (PTO)
- SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
-
General
- Paint: Caterpillar yellow, with optional colors available at request
- Vibration damper
- Lifting eyes
-
Aftertreatment System
- Clean Emissions Module (CEM) consisting of Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC) and high-efficiency Selective Catalytic Reduction (SCR)
- Pump Electronic Control Unit (PETU)
- Available in 12V or 24V systems