Piscataway Campus
732-885-5555
Bensalem Campus
877-726-7663

Land Drilling Engines and Generator Sets

3508B Land Mechanical Drilling Engine

  • Minimum Rating
    760.0 bhp
  • Maximum Rating
    900 BHP
  • Maximum Rating
    900.0 bhp
  • Emissions
    Non-certified
Engine Specifications
Minimum Rating
760.0 bhp
Maximum Rating
900 BHP
Maximum Rating
900.0 bhp
Emissions
Non-certified
Emissions
Non-certified
Displacement
2111 in³
Rated Speed
1200.0 RPM
Minimum Rating
760 BHP
Bore
6.69 in
Bore
6.7 in
Stroke
7.48 in
Stroke
7.5 in
Displacement
2111.0 in3
Rated Speed
1200 r/min
Aspiration
Turbocharged-Aftercooled
Aspiration
Turbocharged-Aftercooled
Governor and Protection
ADEM A3
Engine Weight
9500.0 lb
Engine Weight
9500 lb
Oil Change Interval
500
Rotation
Counterclockwise
Oil Change Interval
500
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 00
Flywheel and Flywheel Housing
SAE No. 00
Flywheel Teeth
151
Flywheel Teeth
151
Capacity for Liquids
Minimum Cooling System
27 gal (US)
Dimensions
Length
84.1 in
Length
84.1 in
Width
67.0 in
Width
67 in
Height
79.7 in
Height
79.7 in
  • Air Inlet System
    • Separate circuit aftercooler core — corrosion resistant coated (airside), air cleaner (single element w/service indicator)
    • Dual rear-mounted turbochargers
  • Control System
    • ADEM A3 ECU — LH
    • Electronic fuel injector fuel system (10 amp DC power required todrive electronic engine control unit)
  • Cooling System
    • Torque converter connections
    • Thermostats and housing, jacket water pump, gear-drivencentrifugal
    • Connections for radiator cooling
    • Dual outlets: 88.9 mm O.D. (3.5 in) elbow hose connections
    • Separate Circuit Aftercooler (SCAC)
  • Exhaust System
    • Exhaust manifold — dry, stainless steel bellows
    • Dual turbochargers with watercooled bearings
    • Exhaust outlet: 292 mm I.D. (11.5 in), 12-10.5 mm dia. holes EQ SP,376 mm bolt hole dia.
  • Flywheels and Flywheel Housing
    • Flywheel, SAE No. 0 — 151 teeth
    • Flywheel housing — SAE No. 0
  • Fuel System
    • Primary fuel filter
    • Fuel priming pump
    • Fuel filter — RH spin-on type
    • Fuel transfer pump
    • Electronically controlled unit injectors
  • Instrumentation
    • Electronic instrument panel
    • Instrumentation readouts:
  • Lube System
    • Crankcase breather — top-mounted
    • Oil cooler
    • Oil filler and dipstick — RH
    • Oil pump
    • Oil filter — RH spin-on type
    • Rear sump oil pan, 250-hour change interval
    • Oil pan drain valve — 3/4" NPT female connection
  • Mounting System
    • Rails — mounting, floor type
  • Power Take-Offs
    • Front housing — two-sided
  • Protection System
    • ADEM A3 ECU system to provide customer-programmableengine deration strategies to protect against adverse operatingconditions
    • Emergency stop logic inputs provided at 40-pin customer interfaceconnection
    • Air inlet shutoff
  • General
    • Paint — Cat yellow
    • Vibration damper and guard
    • Lifting eyes
    • B-Series LAND
  • Air Inlet System
    • Air cleaner and air cleaner mounting
    • Remote air inlet adapters
    • Air inlet heater
  • Charging System
    • Battery chargers
    • Charging alternators
  • Control System
    • Local speed throttle control
    • Throttle position sensors
    • Load sharing modules
    • Governor conversion
  • Cooling System
    • High gloss black folded core radiators
    • Coolant regulator conversion
    • Belt guard and radiator guard
    • Blower fan
    • Radiator cover
    • Fan drive and fan pulleys
    • Water level switch gauge
    • Coolant level sensors
    • Coolant conditioner
    • Expansion tank
    • Heat exchanger cooling conversion
    • Auxiliary water pump
    • Air separator
  • Emissions Certifications
    • IMO Certification and European Union Certification
  • Exhaust System
    • Flexible exhaust fitting
    • Elbows and flange
    • Flange and exhaust adapters
    • Manifold and mufflers
  • Fuel Systems
    • Flexible fuel lines
    • Fuel cooler
    • Water/fuel separator
    • Fuel level switch
  • Instrumentation
    • Customer management device
    • Remote panel display and remote cylinder temperature display
    • Switches and contactors
    • Gauges and instrument panels
  • Lube System
    • Fumes disposal
    • Oil pans
    • Prelube options
    • Sump pumps
    • Oil Filters
  • Mounting System
    • Vibration isolators
  • Power Take-Offs
    • Front housing
    • Flexible couplings
    • Coupling hub
    • Front accessory drives
    • Auxiliary drive shaft
    • Auxiliary drive pulleys
    • Front stub shaft
    • Damper guard removal
    • Pulleys
    • Flywheel stub shaft
  • Protection System
    • Shutoffs
    • Switches and contractors
    • Explosion relief valve
    • Sensors
    • Oil pressure monitor
    • Shutoff controls
    • Corrosion protection
  • Starting System
    • Air starting motors — electric
    • Air pressure regulator
    • Air silencer
    • Hydraulic starter
    • Air start controls — manual, electric
    • Redundant start
    • Starting aids
    • Battery sets – 24V
    • Battery cable and battery rack