Land Drilling Engines and Generator Sets
3512 Land Mechanical Drilling Engine
-
Minimum Rating1020.0 bhp
-
Maximum Rating1800 BHP
-
Maximum Rating1800.0 bhp
-
EmissionsNon-certified
Engine Specifications
- Minimum Rating
- 1020.0 bhp
- Maximum Rating
- 1800 BHP
- Maximum Rating
- 1800.0 bhp
- Emissions
- Non-certified
- Emissions
- Non-certified
- Displacement
- 3158 in³
- Rated Speed
- 1800.0 RPM
- Minimum Rating
- 1020 BHP
- Bore
- 6.69 in
- Bore
- 6.69 in
- Stroke
- 7.48 in
- Stroke
- 7.48 in
- Displacement
- 3158.0 in3
- Rated Speed
- 1800 r/min
- Aspiration
- Turbocharged-Aftercooled
- Aspiration
- Turbocharged-Aftercooled
- Governor and Protection
- W3161
- Engine Weight
- 11462.0 lb
- Engine Weight
- 11462 lb
- Oil Change Interval
- 500
- Rotation
- Counterclockwise
- Oil Change Interval
- 500
- Rotation from Flywheel End
- Counterclockwise
- Flywheel and Flywheel Housing
- SAE No. 00
- Flywheel and Flywheel Housing
- SAE No. 00
- Flywheel Teeth
- 183
- Flywheel Teeth
- 183
Capacity for Liquids
- Minimum Cooling System
- 41 gal (US)
Dimensions
- Length
- 105.3 in
- Length
- 105.3 in
- Width
- 67.0 in
- Width
- 67 in
- Height
- 67.7 in
- Height
- 67.7 in
-
Air Inlet System
- Corrosion-resistant aftercooler core
- Regular duty air cleaner
- Service indicator
-
Control System
- Governor, Woodward 3161 — RH
- Pneumatic control
- Governor control - positive locking
-
Cooling System
- Thermostats and housing (dual outlet)
- Jacket water pump, gear driven
-
Exhaust System
- Dry exhaust manifold
- Exhaust flexible fitting, adapters, and flanges
-
Flywheel and Housing
- SAE No. 00 flywheel
- SAE No. 00 flywheel housing
- SAE standard rotation
-
Fuel System
- Fuel filter
- Fuel transfer pump
- Flexible fuel lines
- Fuel priming pump
-
Instrumentation
- Analog instrument gauges:
-
Lubrication System
- Crankcase breather
- Oil cooler
- Oil filter
- Shallow oil pan
- Oil drain extension, 2 in NPT female connection
-
Mounting System
- Rails, mounting, floor type
-
Power take-offs
- Accessory drive
- Front housing, two-sided
-
Protection System
- Manual shutoff control, LH
- Junction box
- Safety shutoff protection, energized to shutdown
-
Starting System
- Air starting motor
- Air silencer
-
General
- Paint - Cat yellow
- Vibration damper and guard
- Lifting eyes
-
Air Inlet System
- Heavy duty air cleaner
- Remote air inlet adapters
-
Control System
- Load sharing governor, 2301A
- Load sharing module
- Governor conversion to 0-200 mA direct rack control
- Local speed throttle control
- Throttle position sensors
-
Cooling System
- High gloss black folded core radiators and conventionalcore radiators
- Belt guard
- Blower fan
- Fan drive and fan pulley
- Radiator cover
- Water level switch gauge
- Air separator
- Coolant level sensors
- Connections
-
Exhaust System
- Exhaust elbows
- Exhaust mufflers
-
Fuel System
- Primary fuel filter
-
Generator and Attachments
- Low voltage extension box
- Potential and current transformers
- Air filter
- Cable access box
- Bearing RTDs
-
Instrumentation
- Customer management device
- Gauges and instrumentation panels
- Switches and contactors
-
Lubrication System
- Crankcase fumes disposal
- Oil pan accessories
-
Power Take-off
- Crankshaft pulley
- Front stub shaft
- Charging alternator
- Air compressor
-
Protection System
- Explosion relief valves (3)
- Shutoffs
- Switches and contactors
-
Starting System
- Manual air starter
- Air pressure regulator
-
General
- Flywheel guard