Land Electric-Drive Modules
3512C Land Electric-Drive Drilling Module with Dynamic Gas Blending
-
EmissionsU.S. EPA Nonroad Tier 2
-
EmissionsU.S. EPA Nonroad Tier 2
-
Engine Control and ProtectionADEM A3
-
GeneratorSR4B
Engine Specifications
- Emissions
- U.S. EPA Nonroad Tier 2
- Emissions
- U.S. EPA Nonroad Tier 2
- Engine Control and Protection
- ADEM A3
- Generator
- SR4B
- Aspiration
- Turbocharged-Aftercooled
- Bore
- 6.69 in
- Stroke
- 7.48 in
- Displacement
- 3158.0 in3
- Fuel System
- EUI
- Oil Change Interval
- 500.0 hr
- Weight
- 31864.0 lb
- Generator Set Control
- EMCP 4.4
- Voltage
- 600
- Aspiration
- Turbocharged-Aftercooled
- Bore
- 6.69 in
- Displacement
- 3158 in³
- Engine Control and Protection
- ADEM A3
- Fuel System
- EUI
- Generator
- SR4B
- Generator Set Control
- EMCP 4.4
- Oil Change Interval
- 500 h
- Stroke
- 7.48 in
- Weight
- 31864 lb
Dimensions
- Width
- 91.3 in
- Length
- 238.2 in
- Height
- 104.7 in
- Height
- 104.7 in
- Length
- 238.2 in
- Width
- 91.3 in
Capacity for Liquids
- Lube Oil System
- 84.0 gal
- Cooling System
- 41.0 gal
- Cooling System
- 41 gal (US)
- Lube Oil System
- 84 gal (US)
-
Air Inlet System
- Corrosion-resistant aftercooler core
- Air Inlet shutoff
- Regular duty air cleaner
-
Control System
- ADEM A3 ECU, left-hand mounted
- Direct rack control 0-200 mADC, space heater and jacket water heater connection and controls
-
Cooling System
- Caterpillar supplied radiator, 46/CVS-stacked 0.627 ratio, includes blower fan, fan drive, pulley, belt guard, coolant level sensor, regulator, and fuel cooler
- Separate-circuit aftercooled
- Outlet controlled jacket water thermostat
- Jacket water pump - gear driven
- Dual outlet
- Aftercooler water pump - gear driven
- Aftercooler water thermostat
-
Exhaust System
- Dry exhaust manifold
- Dual turbochargers, water cooled bearings
-
Flywheel and Housing
- SAE No. 00 flywheel
- SAE No. 00 flywheel housing
- SAE standard rotation
-
Fuel System
- Fuel filter simplex (LH) with priming pump (LH)
- Fuel transfer pump
- Fuel return line with flexible connection
- Electronic unit injectors
-
Generator Attachments
- Barrel-mounted petroleum terminal box with air filter and pressure differential switch
-
Instrumentation
- Emergency stop button
- Analog gauges:
- Service port connector
- Customer connection terminal blocks
-
EMCP 4.3 Control Panel
- 140 mm (5.5 in) Graphical Display
- Communication
- Controls
- Generator Set Protection
- Outputs
- Inputs
- Other Features
-
Lubrication System
- Crankcase breather
- Oil cooler
- Shallow oil pan
- Oil drain extension, 2 in NPT female connection
- Simplex oil filter
-
Mounting System
- 4.19 m (165 in) length, 412 mm (16.2 in) height tubes, 1.18 m (50.5 in) wide
-
Protection System
- Engine alarms, derate, and shutdown in abnormal operation
-
Starting System
- TDI air starting motor, RH - 1034 kPa (150 psi)
-
General
- Paint - Cat yellow
-
Air Inlet System
- Heavy duty air cleaner
- Remote air inlet adapter - rectangular
- Remote air inlet adapter - round
-
Control System
- Engine control options:
- Load sharing governor, 2301A
-
Cooling System
- Radiator options:
- Coolant level sensor
- Coolant conditioner
- Cooling system connection options (for use with customer-supplied radiator):
- Fan drive and belt guard (for use with remote and customersupplied radiators)
- Fan pulley options (for use with customer-supplied radiator):
-
Exhaust System
- Exhaust expander 297 mm to 340 mm (11.7 in to 13.4 in)
- Flexible fitting, 356 mm (14 in)
- Elbow, 305 mm (12 in)
- Muffler, 356 mm (14 in), spark arresting, includes companion flanges, clean-out box, and spark box
- Muffler, 305 mm (12 in), spark arresting, includes companion flanges, clean-out box, and spark box
-
Fuel System
- Custom fuel filter
- Primary fuel filter
- Primary fuel filter with water separator
-
Generator Attachments
- Barrel-mounted petroleum terminal box
- Current transformers (3)
- Cable access box
-
Instrumentation
- Communications module PL1000T
- Communications module PL1000E
- Thermocouples installed, one per cylinder
-
Lubrication System
- Custom oil filter
- RH installed centrifugal oil filter
- SAE15W40, Caterpillar DEO, 500 hour
- Crankcase fumes disposal
- Oil level regulator
-
Mounting System
- Custom inner base
- Custom outer base
- Package isolator supports (3), for mounting inner base to customer-supplied base
-
Power Take-off
- Alternator, 24V, 68A
-
Protection System
- Explosion relief valves (3)
- Metal particle detector switch
- Metal particle detector with annunciator
-
Starting System
- Custom starting motor
- Air pressure regulator
-
General
- LH installed engine barring group
- Jacket water heater, UL recognized, 120-240V, single phase, 6 kW, LH and RH mounted
- Jacket water heater, UL recognized, 120-480V, single phase, 12 kW, LH and RH mounted
- Jacket water heater lines