New Cat C7.1 ACERT Generator Set for Sale

Cat C7.1 ACERT Generator Set

Minimum Rating

100 ekW (125 kVA)
Minimum Rating

100 ekW (125 kVA)
Maximum Rating

200 ekW (250 kVA)
Maximum Rating

200 ekW (250 kVA)

Generator Set Specifications

Minimum Rating: 100 ekW (125 kVA)
Minimum Rating: 100 ekW (125 kVA)
Maximum Rating: 200 ekW (250 kVA)
Maximum Rating: 200 ekW (250 kVA)
Frequency: 50 Hz or 60 Hz
Frequency: 50 Hz or 60 Hz
Speed: 1500 rpm (50 hz) or 1800 rpm (60 hz)
Speed: 1500 rpm (50 hz) or 1800 rpm (60 hz)
Emissions: EPA Tier 3, IMO II, EU CC2

Engine Specifications

Engine Model: In-line 6, 4-Stroke-Cycle Diesel
Engine Model: In-line 6, 4-Stroke-Cycle Diesel
Aspiration: TA
Aspiration: TA
Bore: 4.13 in
Bore: 4.13 in
Stroke: 5.3 in
Stroke: 5.3 in
Displacement: 433.3 in3
Displacement: 433.3 in³
Governor Type: Electronic
Governor Type: Electronic
Fuel System: Common Rail Fuel System

Generator Set Configurations

Emissions: EPA Tier 3, IMO II, EU CC2

Generator Set Dimensions

Width: 37.6 in
Width: 37.6 in
Height: 49.7 in
Height: 49.7 in
Weight: 1652 -1840 kg, 3634-4026 lb
Weight: 1652 -1840 kg, 3634-4026 lb
Length: 76.2 in/1935 mm (minimum), 83.3 in/2116 mm (maximum)

Generator Specifications

Pitch: 2/3
Number of Leads: 12
Insulation: Class H
IP Rating: IP23 Water protection
Voltage Regulator: Solid state

AIR INLET SYSTEM
- Open Crankcase Ventilation (OCV) system
- Turbocharger, jacket water cooled
- Integrated coolant lines into manifold utilizing EGR circuit
CONTROL SYSTEM
- Panels available in RH, LH, and rear configurations with a remote mount option
- Electronic diagnostics and fault logging
- Electronic governor
- Electronic Control Module (ECM)
- SAE J1939 data link Ratings Only
- Electronic fuel/air ratio control
COOLING SYSTEM
- Integrated heat exchanger and aftercooler
- Compact design integral coolant passages
- Thermostat and housing
- Jacket Water Heater 120/240V option
- Auxiliary seawater pump, gear driven
- Engine mounted heat exchanger, removable tubeBundle (for sea water) (heat exchanger engines only)
- Engine oil cooler
- Auxiliary sea water lines
- Keel cooling
EXHAUST SYSTEM
- Water-cooled exhaust manifold & turbocharger
- 152 mm (6 in) round flanged outlet
- Dry Elbow/Flange options
FLYWHEELS & FLYWHEEL HOUSINGS
- Flywheel Housing, SAE No. 2
- Flywheel, 134 teeth
- SAE standard rotation
FUEL SYSTEM
- Common Rail Fuel System
- Simplex and Duplex Fuel options
- Flexible fuel line option
- Fuel transfer pump, gear driven
GENERATORS AND GENERATOR ATTACHMENTS
- 12 leads
- 3 phase Brushless
- Separately excited from auxiliary winding to provide 300% short circuit current up to 10 seconds
- 2/3 Pitch
- Broad voltage band
- IP23 Water protection
- Solid state voltage regulator with integral voltage adjustment
- Class H insulation
- Generator temperature rise exceeds marine society requirements for 105 C @ 50 C ambient - prime 85 C @ 50 C ambient - prime Connection poles
LUBE SYSTEM
- Crankcase breather
- Simplex and Duplex options
- Oil filter, RH service
- Oil filler, in valve cover and timing case (option)
- Oil level gauge, RH service
- Oil pan
- Oil pan drain, RH`
- Lubricating oil
- Engine oil pump (gear driven)
MOUNTING SYSTEM
- Skiddable base frame
- Anti vibration isolators between base and engine-generator
POWER TAKE-OFFS
- Poly-V groove for alternator drive
- PTO Shaft Kit (optional)
GENERAL
- Torsional vibration damper and guard
- Paint, Caterpillar yellow
- Lifting eyes
- Protective lifting covers
- Literature
- Battery disconnect switch
- Plastic wrap packaging
- Note: Keel-cooled gen sets do not include the keel cooler(s).
- Engine is certified to D2/E2 emissions cycles

CONTROL SYSTEM
- Governor droop kit
EXHAUST SYSTEM
- Dry Elbow
- Dry Flange
- Exhaust Temp Sensor
FUEL SYSTEM
- Flexible Fuel Lines
LUBE SYSTEM
- Dipstick
COOLING SYSTEM
- Coolant recovery tank
- Jacket Water Heater
POWER TAKE-OFFS
- Crankshaft Pulley