New 3516C Offshore Generator Set for Sale

3516C Offshore Generator Set

Minimum Rating

2039 kV·A
Maximum Rating

2304 kV·A
Emissions

IMO Tier II
Aspiration

Turbocharged-Aftercooled

Engine Specifications

Minimum Rating: 2039 kV·A
Maximum Rating: 2304 kV·A
Emissions: IMO Tier II
Aspiration: Turbocharged-Aftercooled
Fuel System: EUI
Oil Change Interval: 1000.0 hr
Stroke: 7.5 in
Bore: 6.7 in
Displacement: 4233.0 in3
Engine Control: ADEM A3
Weight: 41400 lb
Aspiration: Turbocharged-Aftercooled
Bore: 6.7 in
Displacement: 4233 in³
Fuel System: EUI
Oil Change Interval: 1000 h
Stroke: 7.5 in

Dimensions

Length: 264.0 in
Height: 99.9 in
Width: 78.3 in
Height: 99.9 in
Length: 264 in
Width: 78.3 in

Capacity for Liquids

Cooling System: 62.0 gal
Lube Oil System: 107.0 gal
Cooling System: 62 gal (US)
Lube Oil System: 107 gal (US)

AIR INLET SYSTEM
- Corrosion resistant separate circuit aftercooler core, regular dutyair cleaners, dual turbochargers
CONTROL SYSTEM
- Caterpillar A-III electronic engine control, Electronic UnitInjection fuel system, rigid wiring harness
COOLING SYSTEM
- Auxiliary fresh water pump, centrifugal non-self-priming auxiliarysea water pump, gear driven centrifugal jacket water pump,expansion tank, engine oil cooler, thermostats and housing
EXHAUST SYSTEM
- Dry gas-tight exhaust manifolds with heat shields, dualturbochargers with water-cooled bearings and heat shields,vertical exhaust outlet
FLYWHEELS & FLYWHEEL HOUSINGS
- Flywheel, SAE No. 00, 183 teethFlywheel housing, SAE No. 00
FUEL SYSTEM
- Fuel filter, RH, with service indicators
- Fuel transfer pump
- Electronically Controlled Unit Injectors
INSTRUMENTATION
- Engine mounted instrument panel with four position switch, overspeed shutdown notification light, emergency stop notificationlight, graphical display unit for analog or digital display of: oil andfuel pressure, oil and fuel filter differential, system DC voltage,exhaust and water temperature, air inlet restriction, servicemeter, engine speed, fuel consumption (total and instantaneous)
LUBE SYSTEM
- Top mounted crankcase breather, RH oil filter, RH oil filler,gear type oil pump, deep sump oil pan, recommended use ofCaterpillar Diesel Engine Oil 10W30 or 15W40
MOUNTING SYSTEM
- Industrial type engine mounting rails)
POWER TAKE-OFFS
- Accessory driveLower RH, Lower LHFront housing, Two-sided
PROTECTION SYSTEM
- A-III Electronic Monitoring System provides customer programmableengine de-ration strategies to protect against adverse operatingconditions
- Emergency stop push button (located in Electronic Instrument Panel)Safety shutoff protection for oil pressure and water temperature, overspeed protection
GENERAL
- Vibration damper and guardPaint, Caterpillar Yellow engine with black rails.Lifting eyes

AIR INLET SYSTEM
- Air Cleaner Removal
- Remote Air Inlet Adapters
CHARGING SYSTEM
- Battery Chargers
- Charging Alternators
CONTROL SYSTEM
- Load Sharing module
- Local speed throttle control
COOLING SYSTEM
- Water level switch gauge
- Coolant level sensors
- Connections
- Keel Cooling Conversions
- Radiator cooling conversion
- Heat exchangers
- Auxiliary water pumps
- Sea water pump removal
- Air separator
EXHAUST SYSTEM
- Exhaust outlet
- Flexible fittings
- Elbows
- Flanges
- Flange and exhaust expanders
- Mufflers
FUEL SYSTEM
- Fuel Cooler
- Fuel priming pumps
- Flexible fuel lines
- Rigid Fuel Lines
- Primary fuel filter
- Fuel level switch
GENERATORS AND GENERATOR ATTACHMENTS
- INSTALLED GENERATOR ARRANGEMENTS F/MAR AUX ENGINES
- INSTALLED GENERATOR ARRANGEMENTS F/MAR AUX ENGINES
INSTRUMENTATION
- PL1000T Communication Module
- PL1000E Communication Module
- Customer Interface Box
- Thermocouples
- Remote panel display
- Remote cylinder temperature display
LUBE SYSTEM
- Oil Pan
- Oil pan accessories
- Sump pumps
- Prelubrication Options
- Lubricating oil
- Centrifugal Oil Filter
MOUNTING SYSTEM
- Vibration isolators
- Rails
POWER TAKE-OFFS
- Flywheel guard
- Flexible coupling
- Coupling hub
- Front housing accessories
- Upper left hand front location
- Upper left hand rear location
- Upper right hand front location:
- Upper right hand rear location
- Lower left hand front location
- Front housing accessory drives
- Front power take-offs
- Crankshaft pulleys
- Damper guard removals
PROTECTION SYSTEM
- Air inlet shutoffs
- Switches and contactors
- Explosion relief valve
- Sensors
SPARE PART KITS
- Engine Parts Kits
STARTING SYSTEM
- Starting motors or barring divice
- Air starting motors options
- Starting aids
- Battery sets - 24 volt - Dry
- Battery rack
GENERAL
- Tool set
- Caterpillar datalink wire
SVCE TOOLS/SHIP PROT/FACTORY SUPPORT
- Commissioning