Oil and Gas
C18 ACERT™ Tier 4 Interim Engine
-
Maximum Rating755 BHP
-
Displacement1104.5 in³
-
Minimum Rating600 BHP
-
Governor and ProtectionElectronic ADEM™ A4
General Specifications
- Maximum Rating
- 755 BHP
- Displacement
- 1104.5 in³
- Minimum Rating
- 600 BHP
- Governor and Protection
- Electronic ADEM™ A4
- RPM
- 1900 r/min
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE No. 0 or SAE No. 1
- Flywheel Teeth
- 136 (SAE 0), 113 (SAE 1)
- Rotation from Flywheel End
- Counterclockwise
- Stroke
- 7.2 in
- Bore
- 5.7 in
Emissions
- Emissions
- U.S. EPA Tier 4 Interim, EU Stage IIIB
Dimensions
- Length
- 60.2 in.
- Length
- 60.2 in
- Width
- 37.8 in.
- Width
- 37.8 in
- Height
- 51.0 in.
- Height
- 51 in
- Weight
- 3482.0 lb
- Weight
- 3482 lb
Capacity for Liquids
- Cooling System
- 7.1 gal (US)
-
Air Inlet System
- Turbocharged Aftercooled
-
Control System
- Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
-
Cooling System
- Vertical outlet thermostat housing, centrifugal water pump, guidance on cooling system design available to ensure machine reliability
-
Exhaust System
- Clean Emissions Module (CEM) that includes Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC), and Cat Regeneration System, optional exhaust outlet
-
Flywheels and Flywheel Housing
- SAE 0 and SAE 1 flywheel housing
-
Fuel System
- MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
-
Lube System
- Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, and center)
-
Power Take Off
- SAE B and SAE C drives available, engine power can also be taken from the front of the engine on some applications
-
General
- Paint: Cat yellow; vibration damper; lifting eyes
Buckets - Loader: 2.9m³ (3.75yd³) Material Handling Bucket for Wheel Loaders 
Buckets - Loader: 17.2 m³ (22.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14.5 m³ (19 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14.5 m³ (19 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14 m³ (18.25 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 11.9 m³ (15.5 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 11.9 m³ (15.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14 m³ (18.25 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Fusion™ Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 4.2 m3 (5.5 yd3) Fusion™ Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 4.2 m3 (5.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge