Oil and Gas
C9.3 ACERT™ Tier 4 Final Engine
-
Maximum Rating455 BHP
-
Displacement567.5 in³
-
Minimum Rating335 BHP
-
AspirationTurbocharged-Aftercooled
General Specifications
- Maximum Rating
- 455 BHP
- Displacement
- 567.5 in³
- Minimum Rating
- 335 BHP
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE 1 or 2
- Flywheel Teeth
- 113 (SAE 1), 138 (SAE 2)
- Stroke
- 5.9 in
- Bore
- 4.5 in
Emissions
- Emissions
- EPA Tier 4 Final and EU Stage IV
Dimensions
- Length
- 44.0 in.
- Length
- 44.3 in
- Width
- 40.4 in.
- Width
- 31.1 in
- Height
- 41.9 in.
- Height
- 41.9 in
- Weight
- 1950.0 lb
- Weight
- 1907 lb
-
Control System
- Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, remote fan control, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU)
-
Cooling System
- Cooling package provides additional auxiliary heat load capacity capable of a minimum 10% of engine rated power. See the Web Ambient Tool (https://wbdat.cat. com/) for estimated ambient capability based on rating, fan drive ratio, fan, altitude and auxiliary heat load.
-
Exhaust System
- Mid-mount turbocharged system with front and rear exhaust configurations
-
Flywheels and Flywheel Housing
- SAE No. 1 and SAE No. 2 flywheel housings; available SAE 1 power take-off housing with optional SAE A, SAE B, and SAE C power take-off drives; engine power can also be taken from the front of the engine with optional attachments
-
Fuel System
- Electronic high pressure common rail; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
-
Lube System
- Open crankcase ventilation system with fumes disposal (optional OCV filter system); oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear-driven); choice of sumps (front, rear, and center)
-
General
- Paint: Cat yellow
Buckets - Loader: 2.9m³ (3.75yd³) Material Handling Bucket for Wheel Loaders 
Buckets - Loader: 17.2 m³ (22.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14.5 m³ (19 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14.5 m³ (19 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14 m³ (18.25 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 11.9 m³ (15.5 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 11.9 m³ (15.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14 m³ (18.25 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Fusion™ Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 4.2 m3 (5.5 yd3) Fusion™ Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 4.2 m3 (5.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge