Oil and Gas
TH48-E70 Oilfield Transmission
-
Gross Input Power1200 BHP
-
Gross Input Power1200 BHP
-
Gross Peak Input Torque4422 ft-lb
-
Gross Peak Input Torque4422 ft-lb
Transmission Specifications
- Gross Input Power
- 1200 BHP
- Gross Input Power
- 1200 BHP
- Gross Peak Input Torque
- 4422 ft-lb
- Gross Peak Input Torque
- 4422 ft-lb
- Rated Input Speed
- 2100 r/min
- Rated Input Speed
- 2100 r/min
- Maximum Turbine Torque
- 7442 ft-lb
- Maximum Turbine Torque
- 7442 ft-lb
- Gear Type
- Straight spur planetary
- Gear Type
- Straight spur planetary
- Gears
- 7F/0R
- Gears
- 7F/0R
- 1F Gear Ratio
- 6.16
- 1F Gear Ratio
- 6.16
- 2F Gear Ratio
- 4.52
- 2F Gear Ratio
- 4.52
- 3F Gear Ratio
- 3.33
- 3F Gear Ratio
- 3.33
- 4F Gear Ratio
- 2.47
- 4F Gear Ratio
- 2.47
- 5F Gear Ratio
- 1.82
- 5F Gear Ratio
- 1.82
- 6F Gear Ratio
- 1.36
- 6F Gear Ratio
- 1.36
- 7F Gear Ratio
- 1.00
- 7F Gear Ratio
- 1.00
- 7F Gear Ratio
- 1.00
Dimensions
- Width
- 34.0 in
- Width
- 34.1 in
- Height
- 43.0 in
- Height
- 43 in
- weight
- 3735.0 lb
- Weight
- 3735 lb
- Length
- 66.0 in
- Length
- 65.2 in
-
Cat Engines for Optimized Power Train
- Cat C27 ACERT
- Cat C32 ACERT
- Cummins QST30 (950-1500 bhp ratings)
-
Transmission Rotation
- Input rotation — counterclockwise
- Output rotation — counterclockwise(as viewed from rear)
-
Torque Converter
- Integral torque converter
- Series
- Stall torque ratio
-
Clutches
- Clutches — electro-hydraulic fully modulated, oil cooled, multidisc
- Clutch modulation control — Cat Electronic Clutch Pressure Control (ECPC)
-
Installation Connections
- 2 oil cooler lines
- 1 electrical connector
- 1 pump
-
Oil System
- Cat Transmission/Drive Train Oil-4 (TDTO)
- Sump oil temperatures
- Hydraulic fill capacity — Approx. 114 L (30 gal), subject to cooler size, lines, and installation.
- Filter Type — 6 micron synthetic, cartridge remote mount
-
Mountings
- Input connection (flywheel) — SAE #0
- Output connections (yoke) — GWB 390.60/GWB 390.65
- Structural application subject to Caterpillar approval
-
Control System
- Electronic Control Unit (ECU)
- Electronic data link, SAE J1939
- Electrical system 24V
-
Power Take-Off Drives
- Location
- Mounting type: SAE 8 bolt (J704)
- Rated power
Buckets - Loader: 2.9m³ (3.75yd³) Material Handling Bucket for Wheel Loaders 
Buckets - Loader: 17.2 m³ (22.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14.5 m³ (19 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14.5 m³ (19 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14 m³ (18.25 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 11.9 m³ (15.5 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 11.9 m³ (15.5 yd³) pin on Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 14 m³ (18.25 yd³) Fusion™ Light Material Bucket with Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 5.0 m3 (6.5 yd3) Fusion™ Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 4.2 m3 (5.5 yd3) Fusion™ Light Material Bucket With Bolt-On Cutting Edge 
Buckets - Loader: 4.2 m3 (5.5 yd3) Pin On Light Material Bucket With Bolt-On Cutting Edge